lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <714df91022b06c6799afb315962769f22b8ab9f4.1472594203.git.luto@kernel.org>
Date:   Tue, 30 Aug 2016 14:59:37 -0700
From:   Andy Lutomirski <luto@...nel.org>
To:     Keith Busch <keith.busch@...el.com>, Jens Axboe <axboe@...com>
Cc:     linux-nvme@...ts.infradead.org, Christoph Hellwig <hch@....de>,
        linux-kernel@...r.kernel.org, Andy Lutomirski <luto@...nel.org>
Subject: [PATCH v2 1/3] nvme/scsi: Remove power management support

As far as I can tell, there is basically nothing correct about this
code.  It misinterprets npss (off-by-one).  It hardcodes a bunch of
power states, which is nonsense, because they're all just indices
into a table that software needs to parse.  It completely ignores
the distinction between operational and non-operational states.
And, until 4.8, if all of the above magically succeeded, it would
dereference a NULL pointer and OOPS.

Since this code appears to be useless, just delete it.

Signed-off-by: Andy Lutomirski <luto@...nel.org>
---
 drivers/nvme/host/scsi.c | 74 ++----------------------------------------------
 1 file changed, 3 insertions(+), 71 deletions(-)

diff --git a/drivers/nvme/host/scsi.c b/drivers/nvme/host/scsi.c
index e947e298a737..44009105f8c8 100644
--- a/drivers/nvme/host/scsi.c
+++ b/drivers/nvme/host/scsi.c
@@ -72,15 +72,6 @@ static int sg_version_num = 30534;	/* 2 digits for each component */
 #define ALL_LUNS_RETURNED				0x02
 #define ALL_WELL_KNOWN_LUNS_RETURNED			0x01
 #define RESTRICTED_LUNS_RETURNED			0x00
-#define NVME_POWER_STATE_START_VALID			0x00
-#define NVME_POWER_STATE_ACTIVE				0x01
-#define NVME_POWER_STATE_IDLE				0x02
-#define NVME_POWER_STATE_STANDBY			0x03
-#define NVME_POWER_STATE_LU_CONTROL			0x07
-#define POWER_STATE_0					0
-#define POWER_STATE_1					1
-#define POWER_STATE_2					2
-#define POWER_STATE_3					3
 #define DOWNLOAD_SAVE_ACTIVATE				0x05
 #define DOWNLOAD_SAVE_DEFER_ACTIVATE			0x0E
 #define ACTIVATE_DEFERRED_MICROCODE			0x0F
@@ -1229,64 +1220,6 @@ static void nvme_trans_fill_read_cap(u8 *response, struct nvme_id_ns *id_ns,
 
 /* Start Stop Unit Helper Functions */
 
-static int nvme_trans_power_state(struct nvme_ns *ns, struct sg_io_hdr *hdr,
-						u8 pc, u8 pcmod, u8 start)
-{
-	int res;
-	int nvme_sc;
-	struct nvme_id_ctrl *id_ctrl;
-	int lowest_pow_st;	/* max npss = lowest power consumption */
-	unsigned ps_desired = 0;
-
-	nvme_sc = nvme_identify_ctrl(ns->ctrl, &id_ctrl);
-	res = nvme_trans_status_code(hdr, nvme_sc);
-	if (res)
-		return res;
-
-	lowest_pow_st = max(POWER_STATE_0, (int)(id_ctrl->npss - 1));
-	kfree(id_ctrl);
-
-	switch (pc) {
-	case NVME_POWER_STATE_START_VALID:
-		/* Action unspecified if POWER CONDITION MODIFIER != 0 */
-		if (pcmod == 0 && start == 0x1)
-			ps_desired = POWER_STATE_0;
-		if (pcmod == 0 && start == 0x0)
-			ps_desired = lowest_pow_st;
-		break;
-	case NVME_POWER_STATE_ACTIVE:
-		/* Action unspecified if POWER CONDITION MODIFIER != 0 */
-		if (pcmod == 0)
-			ps_desired = POWER_STATE_0;
-		break;
-	case NVME_POWER_STATE_IDLE:
-		/* Action unspecified if POWER CONDITION MODIFIER != [0,1,2] */
-		if (pcmod == 0x0)
-			ps_desired = POWER_STATE_1;
-		else if (pcmod == 0x1)
-			ps_desired = POWER_STATE_2;
-		else if (pcmod == 0x2)
-			ps_desired = POWER_STATE_3;
-		break;
-	case NVME_POWER_STATE_STANDBY:
-		/* Action unspecified if POWER CONDITION MODIFIER != [0,1] */
-		if (pcmod == 0x0)
-			ps_desired = max(POWER_STATE_0, (lowest_pow_st - 2));
-		else if (pcmod == 0x1)
-			ps_desired = max(POWER_STATE_0, (lowest_pow_st - 1));
-		break;
-	case NVME_POWER_STATE_LU_CONTROL:
-	default:
-		res = nvme_trans_completion(hdr, SAM_STAT_CHECK_CONDITION,
-				ILLEGAL_REQUEST, SCSI_ASC_INVALID_CDB,
-				SCSI_ASCQ_CAUSE_NOT_REPORTABLE);
-		break;
-	}
-	nvme_sc = nvme_set_features(ns->ctrl, NVME_FEAT_POWER_MGMT, ps_desired, 0,
-				    NULL);
-	return nvme_trans_status_code(hdr, nvme_sc);
-}
-
 static int nvme_trans_send_activate_fw_cmd(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 					u8 buffer_id)
 {
@@ -2235,11 +2168,10 @@ static int nvme_trans_synchronize_cache(struct nvme_ns *ns,
 static int nvme_trans_start_stop(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 							u8 *cmd)
 {
-	u8 immed, pcmod, pc, no_flush, start;
+	u8 immed, pcmod, no_flush, start;
 
 	immed = cmd[1] & 0x01;
 	pcmod = cmd[3] & 0x0f;
-	pc = (cmd[4] & 0xf0) >> 4;
 	no_flush = cmd[4] & 0x04;
 	start = cmd[4] & 0x01;
 
@@ -2254,8 +2186,8 @@ static int nvme_trans_start_stop(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 			if (res)
 				return res;
 		}
-		/* Setup the expected power state transition */
-		return nvme_trans_power_state(ns, hdr, pc, pcmod, start);
+
+		return 0;
 	}
 }
 
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ