[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e9af2bf5-56e0-cba8-2648-c3754fde410a@osg.samsung.com>
Date: Thu, 1 Sep 2016 10:30:20 +0200
From: Javier Martinez Canillas <javier@....samsung.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Kukjin Kim <kgene@...nel.org>,
linux-samsung-soc@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: Re: [PATCH 1/7] ARM: dts: exynos: Add missing memory node for
Exynos5440 boards
Hello Bartlomiej,
On 08/31/2016 07:22 PM, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Wednesday, August 31, 2016 02:14:33 PM Javier Martinez Canillas wrote:
>> The skeleton.dtsi file was removed in ARM64 for different reasons as
>> explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
>>
>> These also applies to ARM and it will also allow to get rid of the
>> following DTC warnings in the future:
>>
>> "Node /memory has a reg or ranges property, but no unit name"
>>
>> But these boards don't have a memory node defined, so removing the
>> skeleton.dtsi inclusion in exynos4.dtsi will cause a change in the
>> compiled DTB. Add a dummy memory node so the compiled DTB doesn't
>> change if the skeleton.dtsi is removed from exynos4.dtsi.
>>
>> Eventually the correct starting addresses and sizes should be used
>> but I didn't find that information.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@....samsung.com>
>> ---
>>
>> arch/arm/boot/dts/exynos5440-sd5v1.dts | 5 +++++
>> arch/arm/boot/dts/exynos5440-ssdk5440.dts | 5 +++++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
>> index a98501bab6fc..333db4ff373a 100644
>> --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
>> +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
>> @@ -20,6 +20,11 @@
>> bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@...0000000 mem=6144M@...00000000 console=ttySAC0,115200";
>> };
>>
>> + memory {
>> + device_type = "memory";
>> + reg = <0 0>;
>> + };
>
> I think that this node deserves a FIXME comment.
>
Agreed. I'll add one in v2 for both nodes.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
Powered by blists - more mailing lists