[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <57C952B7.3010207@hisilicon.com>
Date: Fri, 2 Sep 2016 11:21:43 +0100
From: Wei Xu <xuwei5@...ilicon.com>
To: Guodong Xu <guodong.xu@...aro.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <catalin.marinas@....com>,
<will.deacon@....com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
"Jaehoon Chung" <jh80.chung@...sung.com>,
Jinguojun <kid.jin@...ilicon.com>
Subject: Re: [PATCH] arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1
Hi Guodong,
On 31/08/2016 14:10, Guodong Xu wrote:
> With these properties added, sd cards inserted into hikey can work at UHS
> mode if they have such capability.
>
> Note, this depends on HiKey UHS-SD support patch [1] to work properly.
> If you didn't add this patch, but added sd-uhs- properties into dwmmc_1,
> then sd cards cannot work. As of this post, patch [1] has been integrated
> into maintainer's next branch [2].
>
> [1]: [V4] mmc: dw_mmc-k3: UHS-SD card for Hisilicon Hikey,
> https://patchwork.kernel.org/patch/9262515/
> [2]: https://git.linaro.org/people/ulf.hansson/mmc.git next
> commit a8a5b2909cfc ("mmc: dw_mmc: k3: UHS-SD card for Hisilicon Hikey")
>
> cc: Ulf Hansson <ulf.hansson@...aro.org>
> cc: Jaehoon Chung <jh80.chung@...sung.com>
> cc: Jinguojun <kid.jin@...ilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
Applied to the hisi-dt-4.9 branch.
Thanks!
Best Regards,
Wei
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 63608e9..17839db 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -785,6 +785,9 @@
> card-detect-delay = <200>;
> hisilicon,peripheral-syscon = <&ao_ctrl>;
> cap-sd-highspeed;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> reg = <0x0 0xf723e000 0x0 0x1000>;
> interrupts = <0x0 0x49 0x4>;
> #address-cells = <0x1>;
>
Powered by blists - more mailing lists