| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160905023443.GF30488@localhost>
Date: Sun, 4 Sep 2016 21:34:43 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Tomasz Nowicki <tn@...ihalf.com>
Cc: arnd@...db.de, will.deacon@....com, catalin.marinas@....com,
rafael@...nel.org, Lorenzo.Pieralisi@....com,
hanjun.guo@...aro.org, okaya@...eaurora.org, jchandra@...adcom.com,
cov@...eaurora.org, dhdang@....com, ard.biesheuvel@...aro.org,
robert.richter@...iumnetworks.com, mw@...ihalf.com,
Liviu.Dudau@....com, ddaney@...iumnetworks.com,
wangyijing@...wei.com, msalter@...hat.com,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linaro-acpi@...ts.linaro.org, jcm@...hat.com,
andrea.gallo@...aro.org, jeremy.linton@....com,
liudongdong3@...wei.com, gabriele.paoloni@...wei.com,
jhugo@...eaurora.org, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH V5 5/5] PCI: thunder-pem: Support quirky
configuration space access for ACPI based PCI host controller
On Mon, Aug 08, 2016 at 03:05:41PM +0200, Tomasz Nowicki wrote:
> Add infrastructure to support ThunderX PEM specific PCI configuration space
> access for ACPI based PCI host controller. This involves:
> 1. New initialization call thunder_pem_cfg_init() to create configuration
> space mapping based on hardcoded range addresses
> 2. thunder_pem_init() ACPI extension to obtain hardcoded addresses for
> PEM specific register ranges
> 3. New quirk entry (for common quirk array) which identifies platform and
> calls thunder_pem_cfg_init() from [1]
Is it possible to split this up a little bit? I *hope* most quirks
aren't as complicated as all this. It'd be nice to make the actual
quirk patches as small as possible so they can be easily copied and
adapted.
Another question below...
> Signed-off-by: Tomasz Nowicki <tn@...ihalf.com>
> ---
> drivers/pci/host/mcfg-quirks.c | 7 +++
> drivers/pci/host/mcfg-quirks.h | 4 ++
> drivers/pci/host/pci-thunder-pem.c | 96 ++++++++++++++++++++++++++++++++------
> 3 files changed, 94 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/host/mcfg-quirks.c b/drivers/pci/host/mcfg-quirks.c
> index aa9907b..2993a72 100644
> --- a/drivers/pci/host/mcfg-quirks.c
> +++ b/drivers/pci/host/mcfg-quirks.c
> @@ -44,6 +44,13 @@ struct pci_cfg_fixup {
>
> static struct pci_cfg_fixup mcfg_quirks[] __initconst = {
> /* { OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, pci_ops, init_hook }, */
> +#ifdef CONFIG_PCI_HOST_THUNDER_PEM
> + /* Pass2.0 */
> + { "CAVIUM", "THUNDERX", 1, MCFG_DOM_RANGE(4, 9), MCFG_BUS_ANY, NULL,
> + thunder_pem_cfg_init },
> + { "CAVIUM", "THUNDERX", 1, MCFG_DOM_RANGE(14, 19), MCFG_BUS_ANY, NULL,
> + thunder_pem_cfg_init },
> +#endif
> };
>
> static bool pci_mcfg_fixup_match(struct pci_cfg_fixup *f,
> diff --git a/drivers/pci/host/mcfg-quirks.h b/drivers/pci/host/mcfg-quirks.h
> index 45cbd16..411c667 100644
> --- a/drivers/pci/host/mcfg-quirks.h
> +++ b/drivers/pci/host/mcfg-quirks.h
> @@ -16,5 +16,9 @@
> #define __MCFG_QUIRKS_H__
>
> /* MCFG quirks initialize call list */
> +#ifdef CONFIG_PCI_HOST_THUNDER_PEM
> +struct pci_config_window *
> +thunder_pem_cfg_init(struct acpi_pci_root *root, struct pci_ops *ops);
> +#endif
>
> #endif /* __MCFG_QUIRKS_H__ */
> diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
> index 6abaf80..3f06e49 100644
> --- a/drivers/pci/host/pci-thunder-pem.c
> +++ b/drivers/pci/host/pci-thunder-pem.c
> @@ -18,9 +18,12 @@
> #include <linux/init.h>
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> +#include <linux/pci-acpi.h>
> #include <linux/pci-ecam.h>
> #include <linux/platform_device.h>
>
> +#include "mcfg-quirks.h"
> +
> #define PEM_CFG_WR 0x28
> #define PEM_CFG_RD 0x30
>
> @@ -284,6 +287,37 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
> return pci_generic_config_write(bus, devfn, where, size, val);
> }
>
> +#ifdef CONFIG_ACPI
> +
> +static struct resource thunder_pem_reg_res[] = {
> + [4] = DEFINE_RES_MEM(0x87e0c0000000UL, SZ_16M),
> + [5] = DEFINE_RES_MEM(0x87e0c1000000UL, SZ_16M),
> + [6] = DEFINE_RES_MEM(0x87e0c2000000UL, SZ_16M),
> + [7] = DEFINE_RES_MEM(0x87e0c3000000UL, SZ_16M),
> + [8] = DEFINE_RES_MEM(0x87e0c4000000UL, SZ_16M),
> + [9] = DEFINE_RES_MEM(0x87e0c5000000UL, SZ_16M),
> + [14] = DEFINE_RES_MEM(0x97e0c0000000UL, SZ_16M),
> + [15] = DEFINE_RES_MEM(0x97e0c1000000UL, SZ_16M),
> + [16] = DEFINE_RES_MEM(0x97e0c2000000UL, SZ_16M),
> + [17] = DEFINE_RES_MEM(0x97e0c3000000UL, SZ_16M),
> + [18] = DEFINE_RES_MEM(0x97e0c4000000UL, SZ_16M),
> + [19] = DEFINE_RES_MEM(0x97e0c5000000UL, SZ_16M),
> +};
> +
> +static struct resource *thunder_pem_acpi_res(struct pci_config_window *cfg)
> +{
> + struct acpi_device *adev = to_acpi_device(cfg->parent);
> + struct acpi_pci_root *root = acpi_driver_data(adev);
> +
> + return &thunder_pem_reg_res[root->segment];
> +}
> +#else
> +static struct resource *thunder_pem_acpi_res(struct pci_config_window *cfg)
> +{
> + return NULL;
> +}
> +#endif
> +
> static int thunder_pem_init(struct pci_config_window *cfg)
> {
> struct device *dev = cfg->parent;
> @@ -292,24 +326,24 @@ static int thunder_pem_init(struct pci_config_window *cfg)
> struct thunder_pem_pci *pem_pci;
> struct platform_device *pdev;
>
> - /* Only OF support for now */
> - if (!dev->of_node)
> - return -EINVAL;
> -
> pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
> if (!pem_pci)
> return -ENOMEM;
>
> - pdev = to_platform_device(dev);
> -
> - /*
> - * The second register range is the PEM bridge to the PCIe
> - * bus. It has a different config access method than those
> - * devices behind the bridge.
> - */
> - res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (acpi_disabled) {
> + pdev = to_platform_device(dev);
> +
> + /*
> + * The second register range is the PEM bridge to the PCIe
> + * bus. It has a different config access method than those
> + * devices behind the bridge.
> + */
> + res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + } else {
> + res_pem = thunder_pem_acpi_res(cfg);
> + }
> if (!res_pem) {
> - dev_err(dev, "missing \"reg[1]\"property\n");
> + dev_err(dev, "missing configuration region\n");
> return -EINVAL;
> }
>
> @@ -360,3 +394,39 @@ static struct platform_driver thunder_pem_driver = {
> .probe = thunder_pem_probe,
> };
> builtin_platform_driver(thunder_pem_driver);
> +
> +#ifdef CONFIG_ACPI
> +
> +static struct resource thunder_pem_cfg_res[] = {
> + [4] = DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M),
> + [5] = DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M),
> + [6] = DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M),
> + [7] = DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M),
> + [8] = DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M),
> + [9] = DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M),
> + [14] = DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M),
> + [15] = DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M),
> + [16] = DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M),
> + [17] = DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M),
> + [18] = DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M),
> + [19] = DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M),
> +};
> +
> +struct pci_config_window *
> +thunder_pem_cfg_init(struct acpi_pci_root *root, struct pci_ops *ops)
> +{
> + struct resource *bus_res = &root->secondary;
> + u16 seg = root->segment;
> + struct pci_config_window *cfg;
> +
> + cfg = pci_ecam_create(&root->device->dev, &thunder_pem_cfg_res[seg],
> + bus_res, &pci_thunder_pem_ops);
What happens when root->segment is not one of the values defined in
thunder_pem_cfg_res[], say "0"? I *think* pci_ecam_create() will see
cfgres as all zeros, and the request_resource_conflict() will probably
fail. That doesn't seem like a very graceful way to report a firmware
error.
> + if (IS_ERR(cfg)) {
> + dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
> + seg, bus_res, PTR_ERR(cfg));
> + return NULL;
> + }
> +
> + return cfg;
> +}
> +#endif
> --
> 1.9.1
>
Powered by blists - more mailing lists