[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160906063529.GA22312@b29397-desktop>
Date: Tue, 6 Sep 2016 14:35:29 +0800
From: Peter Chen <hzpeterchen@...il.com>
To: Arnd Bergmann <arnd@...db.de>
Cc: Leo Li <pku.leo@...il.com>, Felipe Balbi <balbi@...nel.org>,
Grygorii Strashko <grygorii.strashko@...com>,
Russell King - ARM Linux <linux@....linux.org.uk>,
Catalin Marinas <catalin.marinas@....com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
Sekhar Nori <nsekhar@...com>,
lkml <linux-kernel@...r.kernel.org>,
Stuart Yoder <stuart.yoder@....com>,
Scott Wood <oss@...error.net>,
David Fisher <david.fisher1@...opsys.com>,
"Thang Q. Nguyen" <tqnguyen@....com>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] usb: dwc3: host: inherit dma configuration from parent
dev
On Mon, Sep 05, 2016 at 05:39:27PM +0200, Arnd Bergmann wrote:
> On Friday, September 2, 2016 5:16:31 PM CEST Leo Li wrote:
> >
> > Can we use the firmware or bootloader information to provide the
> > default dma-mapping attributes for devices that doesn't have an
> > of_node pointer or ACPI data? This will at least restore what we had
> > previously provided . I'm concerned that changing all the drivers
> > that are creating child device will be a big effort. Like I mentioned
> > in another thread, there are many instances of platform_device_add()
> > under the drivers/ directory.
>
> Fortunately, there are not too many drivers that call platform_device_add
> *and* try to set up a dma mask for the child device:
>
> git grep -wl dma_mask drivers | xargs grep -wl 'platform_device_\(add\|register\)'
>
> drivers/base/platform.c
> drivers/bcma/main.c
> drivers/eisa/virtual_root.c
> drivers/mfd/mfd-core.c
> drivers/mfd/omap-usb-host.c
> drivers/misc/mic/card/mic_x100.c
> drivers/platform/goldfish/pdev_bus.c
> drivers/ssb/main.c
> drivers/usb/chipidea/core.c
> drivers/usb/dwc3/dwc3-exynos.c
> drivers/usb/dwc3/host.c
> drivers/usb/gadget/udc/bdc/bdc_pci.c
> drivers/usb/host/bcma-hcd.c
> drivers/usb/host/fsl-mph-dr-of.c
> drivers/usb/host/ssb-hcd.c
> drivers/usb/misc/ftdi-elan.c
> drivers/usb/musb/blackfin.c
> drivers/usb/musb/musb_dsps.c
> drivers/usb/musb/omap2430.c
> drivers/usb/musb/ux500.c
>
> Most of these are probably never used with any nonstandard
> DMA settings (IOMMU, cache coherency, offset, ...).
>
> One thing we could possibly do is to go through these and
> replace the hardcoded dma mask setup with of_dma_configure()
> in all cases in which we actually use DT for probing, which
> should cover the interesting cases.
>
One case I am going to work is to let USB chipidea driver support iommu,
the chipidea core device is no of_node, and created by
platform_add_device on the runtime. Using of_dma_configure with parent
of_node is a solution from my point, like [1].
https://lkml.org/lkml/2016/2/22/7
--
Best Regards,
Peter Chen
Powered by blists - more mailing lists