Message-ID: <1473123076.2201.37.camel@intel.com>
Date:   Tue, 06 Sep 2016 08:51:16 +0800
From:   Zhang Rui <rui.zhang@...el.com>
To:     Khiem Nguyen <khiem.nguyen.xt@...esas.com>,
        Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
Cc:     Wolfram Sang <wsa@...-dreams.de>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Magnus Damm <damm+renesas@...nsource.se>,
        Eduardo Valentin <edubezval@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "Thao Phuong Le. Nguyen" <thao.nguyen.yb@....renesas.com>,
        Hien Dang <hien.dang.eb@...esas.com>,
        Toru Oishi <toru.oishi.zj@...esas.com>
Subject: Re: [PATCH 2/5 v2] thermal: rcar_gen3_thermal: Add R-Car Gen3
 thermal driver

On 六, 2016-09-03 at 05:25 +0000, Khiem Nguyen wrote:
> Signed-off-by: Hien Dang <hien.dang.eb@...esas.com>
> Signed-off-by: Thao Nguyen <thao.nguyen.yb@....renesas.com>
> Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@...esas.com>

Well, I can only see patch 4/5, 5/5 in patchwork but I can not see this
one....

thanks,
rui
> ---
> 
> v2:
>  * Set static function for _linear_temp_converter().
>  * Update the compatible string following new format.
>  * Add newline to improve readability.
>  * Change thermal_init callbacks to void functions.
>  * Improve the processing to register thermal_zones.
>  
>  drivers/thermal/Kconfig             |   9 +
>  drivers/thermal/Makefile            |   1 +
>  drivers/thermal/rcar_gen3_thermal.c | 539
> ++++++++++++++++++++++++++++++++++++
>  3 files changed, 549 insertions(+)
>  create mode 100644 drivers/thermal/rcar_gen3_thermal.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 900d505..8500a0a 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -233,6 +233,15 @@ config RCAR_THERMAL
>  	  Enable this to plug the R-Car thermal sensor driver into
> the Linux
>  	  thermal framework.
>  
> +config RCAR_GEN3_THERMAL
> +	tristate "Renesas R-Car Gen3 thermal driver"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	depends on OF
> +	help
> +	  Enable this to plug the R-Car Gen3 thermal sensor driver
> into the Linux
> +	  thermal framework.
> +
>  config KIRKWOOD_THERMAL
>  	tristate "Temperature sensor on Marvell Kirkwood SoCs"
>  	depends on MACH_KIRKWOOD || COMPILE_TEST
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index d091134..b7e7082 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-
> spmi-temp-alarm.o
>  obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
>  obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
>  obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
> +obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
>  obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
>  obj-y				+= samsung/
>  obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
> diff --git a/drivers/thermal/rcar_gen3_thermal.c
> b/drivers/thermal/rcar_gen3_thermal.c
> new file mode 100644
> index 0000000..cdaaa75
> --- /dev/null
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -0,0 +1,539 @@
> +/*
> + *  R-Car Gen3 THS thermal sensor driver
> + *  Based on drivers/thermal/rcar_thermal.c
> + *
> + * Copyright (C) 2016 Renesas Electronics Corporation.
> + *
> + *  This program is free software; you can redistribute it and/or
> modify
> + *  it under the terms of the GNU General Public License as
> published by
> + *  the Free Software Foundation; version 2 of the License.
> + *
> + *  This program is distributed in the hope that it will be useful,
> but
> + *  WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> GNU
> + *  General Public License for more details.
> + *
> + */
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/spinlock.h>
> +#include <linux/thermal.h>
> +
> +/* Register offset */
> +#define REG_GEN3_CTSR		0x20
> +#define REG_GEN3_THCTR		0x20
> +#define REG_GEN3_IRQSTR		0x04
> +#define REG_GEN3_IRQMSK		0x08
> +#define REG_GEN3_IRQCTL		0x0C
> +#define REG_GEN3_IRQEN		0x10
> +#define REG_GEN3_IRQTEMP1	0x14
> +#define REG_GEN3_IRQTEMP2	0x18
> +#define REG_GEN3_IRQTEMP3	0x1C
> +#define REG_GEN3_TEMP		0x28
> +#define REG_GEN3_THCODE1	0x50
> +#define REG_GEN3_THCODE2	0x54
> +#define REG_GEN3_THCODE3	0x58
> +
> +#define PTAT_BASE		0xE6198000
> +#define REG_GEN3_PTAT1		0x5C
> +#define REG_GEN3_PTAT2		0x60
> +#define REG_GEN3_PTAT3		0x64
> +#define PTAT_SIZE		REG_GEN3_PTAT3
> +
> +/* CTSR bit */
> +#define PONM            (0x1 << 8)
> +#define AOUT            (0x1 << 7)
> +#define THBGR           (0x1 << 5)
> +#define VMEN            (0x1 << 4)
> +#define VMST            (0x1 << 1)
> +#define THSST           (0x1 << 0)
> +
> +/* THCTR bit */
> +#define CTCTL		(0x1 << 24)
> +#define THCNTSEN(x)	(x << 16)
> +
> +#define BIT_LEN_12	0x1
> +
> +#define CTEMP_MASK	0xFFF
> +
> +#define MCELSIUS(temp)			((temp) * 1000)
> +#define TEMP_IRQ_SHIFT(tsc_id)	(0x1 << tsc_id)
> +#define TEMPD_IRQ_SHIFT(tsc_id)	(0x1 << (tsc_id + 3))
> +#define GEN3_FUSE_MASK	0xFFF
> +
> +/* Structure for thermal temperature calculation */
> +struct equation_coefs {
> +	long a1;
> +	long b1;
> +	long a2;
> +	long b2;
> +};
> +
> +struct fuse_factors {
> +	int thcode_1;
> +	int thcode_2;
> +	int thcode_3;
> +	int ptat_1;
> +	int ptat_2;
> +	int ptat_3;
> +};
> +
> +struct rcar_gen3_thermal_priv {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct thermal_zone_device *zone;
> +	struct delayed_work work;
> +	struct fuse_factors factor;
> +	struct equation_coefs coef;
> +	spinlock_t lock;
> +	int id;
> +	int irq;
> +	u32 ctemp;
> +	const struct rcar_gen3_thermal_data *data;
> +};
> +
> +struct rcar_gen3_thermal_data {
> +	void (*thermal_init)(struct rcar_gen3_thermal_priv *priv);
> +};
> +
> +#define rcar_priv_to_dev(priv)		((priv)->dev)
> +#define rcar_has_irq_support(priv)	((priv)->irq)
> +
> +/* Temperature calculation  */
> +#define CODETSD(x)		((x) * 1000)
> +#define TJ_1 96000L
> +#define TJ_3 (-41000L)
> +#define PW2(x) ((x)*(x))
> +
> +static u32 thermal_reg_read(struct rcar_gen3_thermal_priv *priv, u32
> reg)
> +{
> +	return ioread32(priv->base + reg);
> +}
> +
> +static void thermal_reg_write(struct rcar_gen3_thermal_priv *priv,
> +				u32 reg, u32 data)
> +{
> +	iowrite32(data, priv->base + reg);
> +}
> +
> +static int _round_temp(int temp)
> +{
> +	int tmp1, tmp2;
> +	int result = 0;
> +
> +	tmp1 = abs(temp) % 1000;
> +	tmp2 = abs(temp) / 1000;
> +
> +	if (tmp1 < 250)
> +		result = CODETSD(tmp2);
> +	else if (tmp1 < 750 && tmp1 >= 250)
> +		result = CODETSD(tmp2) + 500;
> +	else
> +		result = CODETSD(tmp2) + 1000;
> +
> +	return ((temp < 0) ? (result * (-1)) : result);
> +}
> +
> +static int _read_fuse_factor(struct rcar_gen3_thermal_priv *priv)
> +{
> +	/*
> +	 * FIXME: The value should be read from some FUSE registers.
> +	 * For available SoC, these registers have not been
> supported yet.
> +	 * The pre-defined value will be applied for now.
> +	 */
> +	priv->factor.ptat_1 = 2351;
> +	priv->factor.ptat_2 = 1509;
> +	priv->factor.ptat_3 = 435;
> +	switch (priv->id) {
> +	case 0:
> +		priv->factor.thcode_1 = 3248;
> +		priv->factor.thcode_2 = 2800;
> +		priv->factor.thcode_3 = 2221;
> +		break;
> +	case 1:
> +		priv->factor.thcode_1 = 3245;
> +		priv->factor.thcode_2 = 2795;
> +		priv->factor.thcode_3 = 2216;
> +		break;
> +	case 2:
> +		priv->factor.thcode_1 = 3250;
> +		priv->factor.thcode_2 = 2805;
> +		priv->factor.thcode_3 = 2237;
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static void _linear_coefficient_calculation(struct
> rcar_gen3_thermal_priv *priv)
> +{
> +	int tj_2 = 0;
> +	long a1, b1;
> +	long a2, b2;
> +	long a1_num, a1_den;
> +	long a2_num, a2_den;
> +
> +	tj_2 = (CODETSD((priv->factor.ptat_2 - priv->factor.ptat_3)
> * 137)
> +		/ (priv->factor.ptat_1 - priv->factor.ptat_3)) -
> CODETSD(41);
> +
> +	/*
> +	 * The following code is to calculate coefficients for
> linear equation.
> +	 */
> +	/* Coefficient a1 and b1 */
> +	a1_num = CODETSD(priv->factor.thcode_2 - priv-
> >factor.thcode_3);
> +	a1_den = tj_2 - TJ_3;
> +	a1 = (10000 * a1_num) / a1_den;
> +	b1 = (10000 * priv->factor.thcode_3) - ((a1 * TJ_3) / 1000);
> +
> +	/* Coefficient a2 and b2 */
> +	a2_num = CODETSD(priv->factor.thcode_2 - priv-
> >factor.thcode_1);
> +	a2_den = tj_2 - TJ_1;
> +	a2 = (10000 * a2_num) / a2_den;
> +	b2 = (10000 * priv->factor.thcode_1) - ((a2 * TJ_1) / 1000);
> +
> +	priv->coef.a1 = DIV_ROUND_CLOSEST(a1, 10);
> +	priv->coef.b1 = DIV_ROUND_CLOSEST(b1, 10);
> +	priv->coef.a2 = DIV_ROUND_CLOSEST(a2, 10);
> +	priv->coef.b2 = DIV_ROUND_CLOSEST(b2, 10);
> +}
> +
> +static int _linear_temp_converter(struct equation_coefs coef,
> +					int temp_code)
> +{
> +	int temp, temp1, temp2;
> +
> +	temp1 = MCELSIUS((CODETSD(temp_code) - coef.b1)) / coef.a1;
> +	temp2 = MCELSIUS((CODETSD(temp_code) - coef.b2)) / coef.a2;
> +	temp = (temp1 + temp2) / 2;
> +
> +	return _round_temp(temp);
> +}
> +
> +/*
> + *		Zone device functions
> + */
> +static int rcar_gen3_thermal_update_temp(struct
> rcar_gen3_thermal_priv *priv)
> +{
> +	u32 ctemp;
> +	int i;
> +	unsigned long flags;
> +	u32 reg = REG_GEN3_IRQTEMP1 + (priv->id * 4);
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +
> +	for (i = 0; i < 256; i++) {
> +		ctemp = thermal_reg_read(priv, REG_GEN3_TEMP) &
> CTEMP_MASK;
> +
> +		if (rcar_has_irq_support(priv)) {
> +			thermal_reg_write(priv, reg, ctemp);
> +
> +			if (thermal_reg_read(priv, REG_GEN3_IRQSTR)
> != 0)
> +				break;
> +		} else
> +			break;
> +
> +		udelay(150);
> +	}
> +
> +	priv->ctemp = ctemp;
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
> +{
> +	struct rcar_gen3_thermal_priv *priv = devdata;
> +	int ctemp;
> +	unsigned long flags;
> +
> +	rcar_gen3_thermal_update_temp(priv);
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	ctemp = _linear_temp_converter(priv->coef, priv->ctemp);
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	if ((ctemp < MCELSIUS(-40)) || (ctemp > MCELSIUS(125))) {
> +		struct device *dev = rcar_priv_to_dev(priv);
> +
> +		dev_dbg(dev, "Temperature is not measured
> correctly!\n");
> +		return -EIO;
> +	}
> +
> +	*temp = ctemp;
> +
> +	return 0;
> +}
> +
> +static void r8a7795_thermal_init(struct rcar_gen3_thermal_priv
> *priv)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +
> +	thermal_reg_write(priv, REG_GEN3_CTSR,  THBGR);
> +	thermal_reg_write(priv, REG_GEN3_CTSR,  0x0);
> +
> +	udelay(1000);
> +
> +	thermal_reg_write(priv, REG_GEN3_CTSR, PONM);
> +	thermal_reg_write(priv, REG_GEN3_IRQCTL, 0x3F);
> +	thermal_reg_write(priv, REG_GEN3_IRQEN, TEMP_IRQ_SHIFT(priv-
> >id) |
> +						TEMPD_IRQ_SHIFT(priv
> ->id));
> +	thermal_reg_write(priv, REG_GEN3_CTSR,
> +			PONM | AOUT | THBGR | VMEN);
> +
> +	udelay(100);
> +
> +	thermal_reg_write(priv, REG_GEN3_CTSR,
> +			PONM | AOUT | THBGR | VMEN | VMST | THSST);
> +
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +}
> +
> +static void r8a7796_thermal_init(struct rcar_gen3_thermal_priv
> *priv)
> +{
> +	unsigned long flags;
> +	unsigned long reg_val;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +
> +	thermal_reg_write(priv, REG_GEN3_THCTR,  0x0);
> +
> +	udelay(1000);
> +
> +	thermal_reg_write(priv, REG_GEN3_IRQCTL, 0x3F);
> +	thermal_reg_write(priv, REG_GEN3_IRQEN, TEMP_IRQ_SHIFT(priv-
> >id) |
> +						TEMPD_IRQ_SHIFT(priv
> ->id));
> +	thermal_reg_write(priv, REG_GEN3_THCTR,
> +						CTCTL |
> THCNTSEN(BIT_LEN_12));
> +	reg_val = thermal_reg_read(priv, REG_GEN3_THCTR);
> +	reg_val &= ~CTCTL;
> +	reg_val |= THSST;
> +	thermal_reg_write(priv, REG_GEN3_THCTR, reg_val);
> +
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +}
> +
> +/*
> + *		Interrupt
> + */
> +#define rcar_gen3_thermal_irq_enable(p)		_thermal_irq_
> ctrl(p, 1)
> +#define rcar_gen3_thermal_irq_disable(p)	_thermal_irq_ctrl(p,
> 0)
> +static void _thermal_irq_ctrl(struct rcar_gen3_thermal_priv *priv,
> int enable)
> +{
> +	unsigned long flags;
> +
> +	if (!rcar_has_irq_support(priv))
> +		return;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +
> +	thermal_reg_write(priv, REG_GEN3_IRQMSK,
> +		enable ? (TEMP_IRQ_SHIFT(priv->id) |
> +			TEMPD_IRQ_SHIFT(priv->id)) : 0);
> +
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +}
> +
> +static void rcar_gen3_thermal_work(struct work_struct *work)
> +{
> +	struct rcar_gen3_thermal_priv *priv;
> +
> +	priv = container_of(work, struct rcar_gen3_thermal_priv,
> work.work);
> +
> +	thermal_zone_device_update(priv->zone);
> +
> +	rcar_gen3_thermal_irq_enable(priv);
> +}
> +
> +static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
> +{
> +	struct rcar_gen3_thermal_priv *priv = data;
> +	unsigned long flags;
> +	int status;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +
> +	status = thermal_reg_read(priv, REG_GEN3_IRQSTR);
> +	thermal_reg_write(priv, REG_GEN3_IRQSTR, 0);
> +
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	if ((status & TEMP_IRQ_SHIFT(priv->id)) ||
> +		(status & TEMPD_IRQ_SHIFT(priv->id))) {
> +		rcar_gen3_thermal_irq_disable(priv);
> +		schedule_delayed_work(&priv->work,
> +				      msecs_to_jiffies(300));
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = {
> +	.get_temp	= rcar_gen3_thermal_get_temp,
> +};
> +
> +/*
> + *		Platform functions
> + */
> +static int rcar_gen3_thermal_remove(struct platform_device *pdev)
> +{
> +	struct rcar_gen3_thermal_priv *priv =
> platform_get_drvdata(pdev);
> +	struct device *dev = &pdev->dev;
> +
> +	rcar_gen3_thermal_irq_disable(priv);
> +	thermal_zone_of_sensor_unregister(dev, priv->zone);
> +
> +	pm_runtime_put(dev);
> +	pm_runtime_disable(dev);
> +
> +	return 0;
> +}
> +
> +static const struct rcar_gen3_thermal_data r8a7795_data = {
> +	.thermal_init = r8a7795_thermal_init,
> +};
> +
> +static const struct rcar_gen3_thermal_data r8a7796_data = {
> +	.thermal_init = r8a7796_thermal_init,
> +};
> +
> +static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
> +	{ .compatible = "renesas,r8a7795-thermal", .data =
> &r8a7795_data},
> +	{ .compatible = "renesas,r8a7796-thermal", .data =
> &r8a7796_data},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
> +
> +static int rcar_gen3_thermal_probe(struct platform_device *pdev)
> +{
> +	struct rcar_gen3_thermal_priv *priv;
> +	struct device *dev = &pdev->dev;
> +	struct resource *res, *irq;
> +	int ret = -ENODEV;
> +	int idle;
> +	struct device_node *tz_nd, *tmp_nd;
> +	struct thermal_zone_device *zone;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	priv->dev = dev;
> +
> +	pm_runtime_enable(dev);
> +	pm_runtime_get_sync(dev);
> +
> +	priv->data = of_device_get_match_data(dev);
> +	if (!priv->data)
> +		goto error_unregister;
> +
> +	priv->irq = 0;
> +
> +	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> +	if (irq) {
> +		priv->irq = 1;
> +		for_each_node_with_property(tz_nd, "polling-delay")
> {
> +			tmp_nd = of_parse_phandle(tz_nd,
> +					"thermal-sensors", 0);
> +			if (tmp_nd && !strcmp(tmp_nd->full_name,
> +					dev->of_node->full_name)) {
> +				of_property_read_u32(tz_nd,
> "polling-delay",
> +					&idle);
> +				if (idle > 0)
> +					priv->irq = 0;
> +				break;
> +			}
> +		}
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		goto error_unregister;
> +
> +	priv->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->base)) {
> +		ret = PTR_ERR(priv->base);
> +		goto error_unregister;
> +	}
> +
> +	spin_lock_init(&priv->lock);
> +	INIT_DELAYED_WORK(&priv->work, rcar_gen3_thermal_work);
> +
> +	priv->id = of_alias_get_id(dev->of_node, "tsc");
> +	if (priv->id < 0) {
> +		dev_err(dev, "Failed to get alias id (%d)\n", priv-
> >id);
> +		ret = priv->id;
> +		goto error_unregister;
> +	}
> +
> +	zone = devm_thermal_zone_of_sensor_register(dev, 0, priv,
> +				&rcar_gen3_tz_of_ops);
> +
> +	if (IS_ERR(zone)) {
> +		dev_err(dev, "Can't register thermal zone\n");
> +		ret = PTR_ERR(zone);
> +		goto error_unregister;
> +	}
> +	priv->zone = zone;
> +
> +	priv->data->thermal_init(priv);
> +
> +	ret = _read_fuse_factor(priv);
> +	if (ret)
> +		goto error_unregister;
> +
> +	_linear_coefficient_calculation(priv);
> +
> +	ret = rcar_gen3_thermal_update_temp(priv);
> +
> +	if (ret < 0)
> +		goto error_unregister;
> +
> +
> +	rcar_gen3_thermal_irq_enable(priv);
> +
> +	/* Interrupt */
> +	if (irq) {
> +		ret = devm_request_irq(dev, irq->start,
> +					rcar_gen3_thermal_irq, 0,
> +				       dev_name(dev), priv);
> +		if (ret) {
> +			dev_err(dev, "IRQ request failed\n ");
> +			goto error_unregister;
> +		}
> +	}
> +
> +	dev_info(dev, "probed\n");
> +
> +	return 0;
> +
> +error_unregister:
> +	rcar_gen3_thermal_remove(pdev);
> +
> +	return ret;
> +}
> +
> +static struct platform_driver rcar_gen3_thermal_driver = {
> +	.driver	= {
> +		.name	= "rcar_gen3_thermal",
> +		.of_match_table = rcar_gen3_thermal_dt_ids,
> +	},
> +	.probe		= rcar_gen3_thermal_probe,
> +	.remove		= rcar_gen3_thermal_remove,
> +};
> +module_platform_driver(rcar_gen3_thermal_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver");
> +MODULE_AUTHOR("Khiem Nguyen <khiem.nguyen.xt@...esas.com>");
> -- 
> 1.9.1
> 

Powered by blists - more mailing lists