| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 7 Sep 2016 09:55:09 +0200
From: Javier Martinez Canillas <javier@....samsung.com>
To: Chanwoo Choi <cw00.choi@...sung.com>, k.kozlowski@...sung.com,
kgene@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
catalin.marinas@....com, will.deacon@....com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: krzk@...nel.org, jh80.chung@...sung.com, sw0312.kim@...sung.com,
jy0922.shim@...sung.com, inki.dae@...sung.com,
jonghwa3.lee@...sung.com, beomho.seo@...sung.com,
jaewon02.kim@...sung.com, human.hwang@...sung.com,
ideal.song@...sung.com, ingi2.kim@...sung.com,
m.szyprowski@...sung.com, a.hajda@...sung.com,
s.nawrocki@...sung.com, chanwoo@...nel.org
Subject: Re: [PATCH v2 5/7] arm64: dts: exynos: Add dts files for Samsung
Exynos5433 64bit SoC
Hello Chanwoo,
On 09/02/2016 12:59 PM, Chanwoo Choi wrote:
> Hi Javier,
>
> On 2016년 08월 27일 02:49, Javier Martinez Canillas wrote:
>> Hello Chanwoo,
>>
[snip]
>>
>>> + mipi_phy: video-phy@...C0708 {
>>> + compatible = "samsung,exynos5433-mipi-video-phy";
>>> + #phy-cells = <1>;
>>> + samsung,pmu-syscon = <&pmu_system_controller>;
>>> + samsung,cam0-sysreg = <&syscon_cam0>;
>>> + samsung,cam1-sysreg = <&syscon_cam1>;
>>> + samsung,disp-sysreg = <&syscon_disp>;
>>> + };
>>
>> This node has a unit name but it doesn't have a reg property so dtc will
>> warn about the mismatch when executed with W=1.
>
> The mipi_phy address are included in the PMU (base 0x105c_0000).
> There is no memory map for only MIPI_PHY. Instead, the mipi_phy driver[1]
> uses the regmap (pmu, syscon_cam0/1/disp).
> [1] drivers/phy/phy-exynos-mipi-video.c don't use
>
> Also, the first MIPI_PHY's address is 0x105c0710. I'll fix it.
>
> If you want to add the 'reg' property, I can add DT node as following:
>
> mipi_phy: video-phy@...c0710 {
> reg = <0x105c0710 0x0>;
> compatible = "samsung,exynos5433-mipi-video-phy";
> ...
> };
>
> But it looks strange because the mipi_phy driver[1] never gets
> the base address with of_iomap().
>
The DT should describe the actual HW regardless of the driver implementation.
I'm not sure what's the correct way to handle this (i.e: adding an unused reg
property or not having a unit name) but the mismatch should be fixed to avoid
dtc to complain about it.
>>
>> [snip]
>>
>>> + usbdrd30: usb@...00000 {
>>> + compatible = "samsung,exynos5250-dwusb3";
>>> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
>>> + <&cmu_fsys CLK_SCLK_USBDRD30>;
>>> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
>>> + assigned-clocks =
>>> + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
>>> + <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
>>> + <&cmu_top CLK_DIV_SCLK_USBDRD30>;
>>> + assigned-clock-parents =
>>> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
>>> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
>>> + assigned-clock-rates = <0>, <0>, <66700000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> + status = "disabled";
>>> +
>>
>> Ditto, the node has unit address but no reg property.
>
> The usbdrd[2] driver don't map the base address.
> So, this DT node don't include any code calling the of_iomap().
> [2] drivers/usb/dwc3/dwc3-exynos.c
>
Same comment than above.
> But, the usbdrd's base address is 0x15400000.
>
>>
>>> + dwc3 {
>>> + compatible = "snps,dwc3";
>>> + reg = <0x15400000 0x10000>;
>>
>> Ditto, the node doesn't have a unit address but has reg property.
>
> OK. I'll modify it as following:
> dwc3@...00000 {
>
Ok.
>>
>>> + interrupts = <0 231 0>;
>>> + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
>>> + phy-names = "usb2-phy", "usb3-phy";
>>> + };
>>> + };
>>> +
>>> +
>>> + usbhost30: usb@...00000 {
>>> + compatible = "samsung,exynos5250-dwusb3";
>>> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
>>> + <&cmu_fsys CLK_SCLK_USBHOST30>;
>>> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
>>> + assigned-clocks =
>>> + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
>>> + <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
>>> + <&cmu_top CLK_DIV_SCLK_USBHOST30>;
>>> + assigned-clock-parents =
>>> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
>>> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
>>> + assigned-clock-rates = <0>, <0>, <66700000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> + status = "disabled";
>>> +
>>
>> Ditto, the node has unit address but no reg property.
>
> This case is same with above 'usbdrd30'.
>
Same comment than above. The DT shouldn't leak Linux implementation details.
>>
>>> + usbdrd_dwc3_0: dwc3 {
>>> + compatible = "snps,dwc3";
>>> + reg = <0x15a00000 0x10000>;
>>
>> Ditto, the node doesn't have a unit address but has reg property.
>
> I'll modify it as following:
> usbdrd_dwc3_0: dwc3@...00000 {
>
>>
>>> + interrupts = <0 244 0>;
>>> + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
>>> + phy-names = "usb2-phy", "usb3-phy";
>>> + };
>>> + };
>>> +
>>
>> [snip]
>>
>>> + audio-subsystem {
>
> I'll modify it as following:
> audio-subsystem@...00000 {
>
Ok.
>>> + compatible = "samsung,exynos5433-lpass";
>>> + reg = <0x11400000 0x100>, <0x11500000 0x08>;
>>
>> Ditto, the node doesn't have a unit address but has reg property.
>>
>> Reviewed-by: Javier Martinez Canillas <javier@....samsung.com>
>
> Thanks for your review.
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
Powered by blists - more mailing lists