[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7e5486cc-4080-2d1e-8f6d-98874379887d@gmail.com>
Date: Wed, 7 Sep 2016 12:30:19 +0300
From: Aleksey Makarov <amakarov.linux@...il.com>
To: Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>
Cc: Aleksey Makarov <aleksey.makarov@...aro.org>,
"Rafael J . Wysocki" <rjw@...ysocki.net>,
"Zheng, Lv" <lv.zheng@...el.com>,
Kefeng Wang <wangkefeng.wang@...wei.com>,
Russell King <linux@....linux.org.uk>,
Peter Hurley <peter@...leysoftware.com>,
Graeme Gregory <graeme.gregory@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-kernel@...r.kernel.org,
Leif Lindholm <leif.lindholm@...aro.org>,
linux-acpi@...r.kernel.org, Yury Norov <ynorov@...iumnetworks.com>,
Christopher Covington <cov@...eaurora.org>,
linux-serial@...r.kernel.org, Mark Salter <msalter@...hat.com>,
Al Stone <ahs3@...hat.com>,
linux-arm-kernel@...ts.infradead.org, Len Brown <lenb@...nel.org>
Subject: Re: [PATCH v10 3/4] ARM64: ACPI: enable ACPI_SPCR_TABLE
On 09/05/2016 03:36 PM, Aleksey Makarov wrote:
> SBBR mentions SPCR as a mandatory ACPI table. So enable it for ARM64
>
> Earlycon should be set up as early as possible. ACPI boot tables are
> mapped in arch/arm64/kernel/acpi.c:acpi_boot_table_init() that
> is called from setup_arch() and that's where we parse SPCR.
> So it has to be opted-in per-arch.
>
> When ACPI_SPCR_TABLE is defined initialization of DT earlycon is
> deferred until the DT/ACPI decision is done. Initialize DT earlycon
> if ACPI is disabled.
Hi Will, Catalin,
Can you review this patch and consider ACKing it please?
Thank you
Aleksey Makarov
> Signed-off-by: Aleksey Makarov <aleksey.makarov@...aro.org>
> Tested-by: Kefeng Wang <wangkefeng.wang@...wei.com>
> Tested-by: Christopher Covington <cov@...eaurora.org>
> ---
> arch/arm64/Kconfig | 1 +
> arch/arm64/kernel/acpi.c | 11 ++++++++++-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index bc3f00f..11a2d36 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -4,6 +4,7 @@ config ARM64
> select ACPI_GENERIC_GSI if ACPI
> select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> select ACPI_MCFG if ACPI
> + select ACPI_SPCR_TABLE if ACPI
> select ARCH_HAS_DEVMEM_IS_ALLOWED
> select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
> select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index 3e4f1a4..252a6d9 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -24,6 +24,7 @@
> #include <linux/memblock.h>
> #include <linux/of_fdt.h>
> #include <linux/smp.h>
> +#include <linux/serial_core.h>
>
> #include <asm/cputype.h>
> #include <asm/cpu_ops.h>
> @@ -206,7 +207,7 @@ void __init acpi_boot_table_init(void)
> if (param_acpi_off ||
> (!param_acpi_on && !param_acpi_force &&
> of_scan_flat_dt(dt_scan_depth1_nodes, NULL)))
> - return;
> + goto done;
>
> /*
> * ACPI is disabled at this point. Enable it in order to parse
> @@ -226,6 +227,14 @@ void __init acpi_boot_table_init(void)
> if (!param_acpi_force)
> disable_acpi();
> }
> +
> +done:
> + if (acpi_disabled) {
> + if (earlycon_init_is_deferred)
> + early_init_dt_scan_chosen_stdout();
> + } else {
> + parse_spcr(earlycon_init_is_deferred);
> + }
> }
>
> #ifdef CONFIG_ACPI_APEI
>
Powered by blists - more mailing lists