[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1473243615-29746-2-git-send-email-simhavcs@gmail.com>
Date: Wed, 7 Sep 2016 15:50:11 +0530
From: Vinay Simha BN <simhavcs@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vinay Simha BN <simhavcs@...il.com>,
John Stultz <john.stultz@...aro.org>,
Sumit Semwal <sumit.semwal@...aro.org>,
Jonghwa Lee <jonghwa3.lee@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Myungjoo Ham <myungjoo.ham@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-pm@...r.kernel.org (open list:POWER SUPPLY CLASS/SUBSYSTEM and
DRIVERS),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 2/4] dt-bindings: Add summit SMB347 charger bindings
Add documentation for summit SMB347 charger
Cc: John Stultz <john.stultz@...aro.org>
Cc: Sumit Semwal <sumit.semwal@...aro.org>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
Cc: Chanwoo Choi <cw00.choi@...sung.com>
Cc: Myungjoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Vinay Simha BN <simhavcs@...il.com>
---
.../bindings/power/supply/smb347_charger.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/smb347_charger.txt
diff --git a/Documentation/devicetree/bindings/power/supply/smb347_charger.txt b/Documentation/devicetree/bindings/power/supply/smb347_charger.txt
new file mode 100644
index 0000000..91570a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/smb347_charger.txt
@@ -0,0 +1,57 @@
+smb347_charger bindings
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+[Required porperties]
+- compatible : "summit,smb347"
+- reg : Slave address for i2c interface
+# At least one of followings should be set
+ - enable-usb-charging
+ - enable-otg-charging
+ - enable-mains-charging
+
+[Optional properties]
+- interrupt-parent : The phandle for the interrupt controller
+- interrupts : Interrupt line index for mapping
+- enable-chg-ctrl : Enable charging control
+ <0> : SW (i2c interface)
+ <1> : Pin control (Active Low)
+ <2> : Pin control (Active High)
+# Charging constraints
+- max-chg-curr : Maximum current for charging (in uA)
+- max-chg-volt : Maximum voltage for charging (in uV)
+- pre-chg-curr : Pre-charging current (in uA)
+- term-curr : Charging cycle termination current (in uA)
+- fast-volt-thershold : Voltage threshold to transit to fast charge mode (in uV)
+- mains-curr-limit : Maximum input current from AC/DC input (in uA)
+- usb-curr-limit : Maximum input current from USB input (in uA)
+
+# Related thermometer monitoring (in degree C)
+- chip-temp-threshold : Chip temperature for thermal regulaton. <100, 130>
+- soft-cold-temp-limit : Cold battery temperature for soft alarm. <0, 15>*
+- soft-hot-temp-limit : Hot battery temperature for soft alarm. <40, 55>
+- hard-cold-temp-limit : Cold battery temperature for hard alarm. <0, 15>*
+- hard-hot-temp-limit : Hot battery temperature for hard alarm. <55, 65>
+(* The written temperature has +5'C offset. 0'C -> -5'C, 15'C -> 10'C)
+- soft-comp-method : Soft temperature limit compensation method
+ (Not defined) : Use default setting
+ <0> : Compensation none
+ <1> : Charge current compensation
+ <2> : Voltage compensation
+
+Example:
+ smb347@7f {
+ compatible = "summit,smb347";
+ reg = <0x7f>;
+ status = "okay";
+
+ max-chg-curr = <1800000>;
+ mains-curr-limit = <2000000>;
+ usb-curr-limit = <450000>;
+
+ chip-temp-thershold = <110>;
+
+ enable-usb-charging;
+ enable-mains-charging;
+
+ enable-chg-ctrl = <2>; /* Pin control (Active High) */
+ };
--
2.1.2
Powered by blists - more mailing lists