[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <821b4b7a-aa0b-293d-01d0-722094c1bc12@samsung.com>
Date: Wed, 07 Sep 2016 15:10:39 +0200
From: Jacek Anaszewski <j.anaszewski@...sung.com>
To: vadimp@...lanox.com, rpurdie@...ys.net
Cc: linux-leds@...r.kernel.org, linux-kernel@...r.kernel.org,
jiri@...nulli.us, michaelsh@...lanox.com
Subject: Re: [patch 2/2] leds: add driver for Mellanox systems leds
Hi Vadim,
Please use git format-patch -n, where n is the number
of patches to be produced starting from your current git HEAD.
It will produce patches tagged [PATCH 1/2], [PATCH 2/2],
or starting from [PATCH 0/2] when added --cover-letter switch.
Now it looks as if this patch was a part of the patch set
comprising two patches, but I don't see the first one.
I assume that you added the numbering by hand and this one
was intended to be put in the one set with the following one:
[patch] leds: add driver for Mellanox systems leds
On 09/07/2016 04:53 PM, vadimp@...lanox.com wrote:
> From: Vadim Pasternak <vadimp@...lanox.com>
>
> Fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively.
>
> Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
> ---
> drivers/leds/leds-mlxcpld.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> index 0ec2375..eeed35c 100644
> --- a/drivers/leds/leds-mlxcpld.c
> +++ b/drivers/leds/leds-mlxcpld.c
> @@ -47,8 +47,8 @@
> #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
>
> /* Color codes for leds */
> -#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3KHz blink */
> -#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6KHz blink */
> +#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3Hz blink */
> +#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6Hz blink */
> #define LED_IS_OFF 0x00 /* Off */
> #define LED_RED_STATIC_ON 0x05 /* Solid red */
> #define LED_RED_BLINK_HALF (LED_RED_STATIC_ON + LED_OFFSET_HALF)
> @@ -237,7 +237,7 @@ static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
> /* Each led is controlled through low or high nibble of the relevant
> * CPLD register. Register offset is specified by off parameter.
> * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> - * 0x6 for 3KHz blink red, 0xd for solid green, 0xe for 3KHz blink
> + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> * green.
> * Parameter mask specifies which nibble is used for specific led: mask
> * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> @@ -274,8 +274,8 @@ static int mlxcpld_led_blink(struct led_classdev *led,
> {
> struct mlxcpld_led_priv *pled = cdev_to_priv(led);
>
> - /* HW supports two types of blinking: full (6KHz) and half (3KHz).
> - * For delay on/off zero default setting 3KHz is used.
> + /* HW supports two types of blinking: full (6Hz) and half (3Hz).
> + * For delay on/off zero default setting 3Hz is used.
> */
> if (!(*delay_on == 0 && *delay_off == 0) &&
> !(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ) &&
>
--
Best regards,
Jacek Anaszewski
Powered by blists - more mailing lists