linux-kernel - [PATCH v3 6/8] dt-bindings: Add support for Amlogic GXBB SCPI Interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1473262477-18045-7-git-send-email-narmstrong@baylibre.com>
Date:   Wed,  7 Sep 2016 17:34:35 +0200
From:   Neil Armstrong <narmstrong@...libre.com>
To:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        sudeep.holla@....com, devicetree@...r.kernel.org
Cc:     Neil Armstrong <narmstrong@...libre.com>,
        linux-amlogic@...ts.infradead.org, khilman@...libre.com,
        heiko@...ech.de, wxt@...k-chips.com, frank.wang@...k-chips.com
Subject: [PATCH v3 6/8] dt-bindings: Add support for Amlogic GXBB SCPI Interface

Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
 Documentation/devicetree/bindings/arm/arm,scpi.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
index faa4b44..04bc171 100644
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -7,7 +7,7 @@ by Linux to initiate various system control and power operations.
 
 Required properties:
 
-- compatible : should be "arm,scpi"
+- compatible : should be "arm,scpi" or "amlogic,meson-gxbb-scpi"
 - mboxes: List of phandle and mailbox channel specifiers
 	  All the channels reserved by remote SCP firmware for use by
 	  SCPI message protocol should be specified in any order
@@ -60,7 +60,8 @@ A small area of SRAM is reserved for SCPI communication between application
 processors and SCP.
 
 Required properties:
-- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
+- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno,
+		or "amlogic,meson-gxbb-sram" for Amlogic GXBB SoC.
 
 The rest of the properties should follow the generic mmio-sram description
 found in ../../sram/sram.txt
@@ -70,7 +71,8 @@ Each sub-node represents the reserved area for SCPI.
 Required sub-node properties:
 - reg : The base offset and size of the reserved area with the SRAM
 - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
-	       shared memory on Juno platforms
+	       shared memory on Juno platforms or
+	       "amlogic,meson-gxbb-scp-shmem" for Amlogic GXBB SoC.
 
 Sensor bindings for the sensors based on SCPI Message Protocol
 --------------------------------------------------------------
-- 
1.9.1