linux-kernel - Re: [PATCH v5] i2c: imx: make bus recovery through pinctrl optional

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <CADRPPNRppCf4v7S_i69XOmY8X6YwUeiwdkaRZwSDaao5XHKChQ@mail.gmail.com>
Date:   Wed, 7 Sep 2016 11:40:32 -0500
From:   Leo Li <pku.leo@...il.com>
To:     Tracy Smith <tlsmith3777@...il.com>
Cc:     Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>,
        "linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
        Wolfram Sang <wsa@...-dreams.de>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>, linux-gpio@...r.kernel.org,
        Li Yang <leoyang.li@....com>, Stefan Agner <stefan@...er.ch>,
        Gao Pan <pandy.gao@....com>,
        lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5] i2c: imx: make bus recovery through pinctrl optional

On Wed, Sep 7, 2016 at 5:07 AM, Tracy Smith <tlsmith3777@...il.com> wrote:
> Hello, bus recovery is needed generally speaking because of potential
> protocol errors that might cause a failure condition hanging the bus.
>
> It happens frequently during bring-up of new I2C devices because firmware in
> I2C controllers fail to handle properly protocol errors.
>
> Can NXP add bus recovery for the LS1021A and LS1043A in a separate patch--
> unless there is no HW bus recovery mechanism?
>
> The concern is while fixing I.MX, NXP will fail to fix the driver bus
> recovery for the LS1021A and LS1043A and the bus will hang.
>
> If bus recovery is supported on the LS1021A and the LS1043A, a patch should
> be provided or added in this patch instead of simply disabling bus recovery.
> Request NXP to consider the patch if there is HW support for bus recovery.

I'm not the right person to answer if this is possible.  I will
forward your request to the related developer.

Thanks,
Leo