linux-kernel - Re: [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <3b3935f7-5d3c-f721-81a5-bb8e8cd186e9@intel.com>
Date:   Thu, 8 Sep 2016 10:21:27 +0300
From:   Adrian Hunter <adrian.hunter@...el.com>
To:     Zach Brown <zach.brown@...com>
Cc:     robh+dt@...nel.org, ulf.hansson@...aro.org, mark.rutland@....com,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, michal.simek@...inx.com,
        soren.brinkmann@...inx.com, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when
 xlnx-fails-without-test-cd is present

On 08/09/16 01:22, Zach Brown wrote:
> The sdhci controller on xilinx zynq devices will not function unless
> the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
> In cases where it is impossible to provide the CD bit in hardware,
> setting the controller to test mode and then setting inserted to true
> will get the controller to function without the CD bit.
> 
> When the device has the property xlnx-fails-without-test-cd the driver
> changes the controller to test mode and sets test inserted to true to
> make the controller function.
> 
> Signed-off-by: Zach Brown <zach.brown@...com>

Doesn't apply.  Please re-base on Ulf's mmc tree's next branch.

But since you're doing that please consider some style changes below.

> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
>  drivers/mmc/host/sdhci.h           |  2 ++
>  2 files changed, 35 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index b6f4c1d..46be9d9 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -23,6 +23,7 @@
>  #include <linux/of_device.h>
>  #include <linux/phy/phy.h>
>  #include "sdhci-pltfm.h"
> +#include <linux/of.h>
>  
>  #define SDHCI_ARASAN_CLK_CTRL_OFFSET	0x2c
>  
> @@ -38,6 +39,10 @@
>  struct sdhci_arasan_data {
>  	struct clk	*clk_ahb;
>  	struct phy	*phy;
> +	unsigned int arasan_quirks; /* Arasan deviations from spec */

Should really try to line up the variable names.  The name seems a bit
redundant too e.g. arasan_quirks -> quirks

> +
> +/* Controller does not have CD wired and will not function normally without */
> +#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD	BIT(0)

SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD seems unnecessarily long.
What about SDHCI_ARASAN_QUIRK_FORCE_CDTEST?

>  };
>  
>  static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
> @@ -79,12 +84,32 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
>  	}
>  }
>  
> +void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
> +{
> +	u8 ctrl;
> +	struct sdhci_pltfm_host *pltfm_host;
> +	struct sdhci_arasan_data *sdhci_arasan;

Normally we would define and initialize i.e.

	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);

> +
> +	sdhci_reset(host, mask);
> +
> +	pltfm_host = sdhci_priv(host);
> +	sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> +	if (sdhci_arasan->arasan_quirks &
> +	     SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
> +		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> +		ctrl |= SDHCI_CTRL_CDTEST_INS |
> +			SDHCI_CTRL_CDTEST_EN;

Didn't need to wrap the line above.

> +		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +	}
> +}
> +
>  static struct sdhci_ops sdhci_arasan_ops = {
>  	.set_clock = sdhci_arasan_set_clock,
>  	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
>  	.get_timeout_clock = sdhci_arasan_get_timeout_clock,
>  	.set_bus_width = sdhci_set_bus_width,
> -	.reset = sdhci_reset,
> +	.reset = sdhci_arasan_reset,
>  	.set_uhs_signaling = sdhci_set_uhs_signaling,
>  };
>  
> @@ -179,6 +204,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>  	struct sdhci_host *host;
>  	struct sdhci_pltfm_host *pltfm_host;
>  	struct sdhci_arasan_data *sdhci_arasan;
> +	struct device_node *np = pdev->dev.of_node;
>  
>  	host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata,
>  				sizeof(*sdhci_arasan));
> @@ -215,6 +241,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>  	}
>  
>  	sdhci_get_of_property(pdev);
> +
> +	if (of_get_property(np, "xlnx-fails-without-test-cd", NULL)) {
> +		sdhci_arasan->arasan_quirks |=
> +				SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
> +	}
> +
>  	pltfm_host->clk = clk_xin;
>  
>  	ret = mmc_of_parse(host->mmc);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 609f87c..60dbf1f 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -84,6 +84,8 @@
>  #define   SDHCI_CTRL_ADMA32	0x10
>  #define   SDHCI_CTRL_ADMA64	0x18
>  #define   SDHCI_CTRL_8BITBUS	0x20
> +#define  SDHCI_CTRL_CDTEST_INS	0x40
> +#define  SDHCI_CTRL_CDTEST_EN	0x80
>  
>  #define SDHCI_POWER_CONTROL	0x29
>  #define  SDHCI_POWER_ON		0x01
>