Message-id: <a5a27472-968c-5ea6-1152-27ef1ccd073d@samsung.com>
Date:   Thu, 08 Sep 2016 09:41:01 +0200
From:   Jacek Anaszewski <j.anaszewski@...sung.com>
To:     vadimp@...lanox.com, rpurdie@...ys.net
Cc:     dave@...blig.org, linux-leds@...r.kernel.org,
        linux-kernel@...r.kernel.org, jiri@...nulli.us,
        michaelsh@...lanox.com
Subject: Re: [patch v4] leds: add driver for Mellanox systems LEDs

Hi Vadim,

Thanks for the updated version. I found few more minor issues,
please look below.

I actually have them fixed, so the patch is ready for being
applied to the linux-leds.git.

Please refer below and let me know if you have any objections.

On 09/08/2016 09:25 AM, vadimp@...lanox.com wrote:
> From: Vadim Pasternak <vadimp@...lanox.com>
>
> This makes it possible to create a set of LEDs for Mellanox systems:
> "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
> "msb7800", "msn2740", "msn2100".
>
> Driver obtains LED devices according to system configuration, provided
> through system DMI data, like fan1:green, fan1:red and creates devices in

s/fan1:green/mkxcpld:fan1:green/
s/fan1:red/mkxcpld:fan1:red/

> form: "devicename:colour:function".
>
> LED setting is controlled through on board CPLD Lattice device.
> For setting particular LED off, solid, blink:
> echo 0 > /sys/class/leds/mlxcpld\:status\:green/brightness
> echo 1 > /sys/class/leds/mlxcpld\:status\:green/brightness
> echo timer > /sys/class/leds/mlxcpld\:status\:green/trigger
>
> On module probing all LEDs are set green, on removing - off.
>
> Last setting overwrites previous, f.e. sequence for
> changing LED from green - red - green:
> echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness
> echo 1 > /sys/class/leds/mlxcpld\:psu\:red/brightness
> echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness
> Note: LEDs cannot be turned on/off simultaneously.
>
> The Kconfig currently controlling compilation of this code is:
> drivers/leds/Kconfig:config LEDS_MLXCPLD
>
> Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
> Reviewed-by: Jiri Pirko <jiri@...lanox.com>
> ---
> v3->v4
>  Fixes issues pointed out by Jacek:
>  - change in all commnets led to LED;
>  - add in defines prefix MLXCPLD;
>  - add to LED names device prefix mlxcpld;
>  - fix long comment stile;
>  - replace mlxcpld_led_brightness by mlxcpld_led_set_brightness;
>  - replace mlxcpld_led_blink by mlxcpld_led_blink_set
> ---
> v2->v3:
>  Fixes issues pointed out by Dave:
>  - fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively;
> ---
> v1->v2:
>  Fixes issues pointed out by Jacek:
>  - fix style in patch cover text;
>  - add doc file with hw description;
>  - arrange include directives in alphabetical order;
>  - make defines more clear;
>  - fix several comments for structure descriptions;
>  - add several empty lines between defentions;
>  - change max_brightness profile setting to 1 instead of LED_FULL;
>  - use capital letters for the enumerator;
>  - change in if (product == NULL) to (!product);
>  - add comments to mlxcpld_led_store_hw;
>  - remove switch statement from mlxcpld_led_brightness;
>  - modify mlxcpld_led_blink;
>  - remove unnecessary devm_kfree in mlxcpld_led_config;
>  - remove switch statement from mlxcpld_led_config;
>  - remove platform_get_drvdata from mlxcpld_led_probe;
> ---
>  Documentation/leds/leds-mlxcpld.txt | 110 +++++++++
>  MAINTAINERS                         |   8 +
>  drivers/leds/Kconfig                |   8 +
>  drivers/leds/Makefile               |   1 +
>  drivers/leds/leds-mlxcpld.c         | 429 ++++++++++++++++++++++++++++++++++++
>  5 files changed, 556 insertions(+)
>  create mode 100644 Documentation/leds/leds-mlxcpld.txt
>  create mode 100644 drivers/leds/leds-mlxcpld.c
>
> diff --git a/Documentation/leds/leds-mlxcpld.txt b/Documentation/leds/leds-mlxcpld.txt
> new file mode 100644
> index 0000000..7b4c2a3
> --- /dev/null
> +++ b/Documentation/leds/leds-mlxcpld.txt
> @@ -0,0 +1,110 @@
> +ver LEDs-mlxcpld
> +==========================
> +Driver for Mellanox systems LEDs.
> +Provide system LED support for the nex Mellanox systems:
> +"msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
> +"msn2410", "msb7800", "msn2740", "msn2100".
> +
> +Description
> +-----------
> +Driver provides the following LEDs for the systems "msx6710", "msx6720",
> +"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740":
> +  mlxcpld:fan1:green
> +  mlxcpld:fan1:red
> +  mlxcpld:fan2:green
> +  mlxcpld:fan2:red
> +  mlxcpld:fan3:green
> +  mlxcpld:fan3:red
> +  mlxcpld:fan4:green
> +  mlxcpld:fan4:red
> +  mlxcpld:psu:green
> +  mlxcpld:psu:red
> +  mlxcpld:status:green
> +  mlxcpld:status:red
> +
> + "status"
> +  CPLD reg offset: 0x20
> +  Bits [3:0]
> +
> + "psu"
> +  CPLD reg offset: 0x20
> +  Bits [7:4]
> +
> + "fan1"
> +  CPLD reg offset: 0x21
> +  Bits [3:0]
> +
> + "fan2"
> +  CPLD reg offset: 0x21
> +  Bits [7:4]
> +
> + "fan3"
> +  CPLD reg offset: 0x22
> +  Bits [3:0]
> +
> + "fan4"
> +  CPLD reg offset: 0x22
> +  Bits [7:4]
> +
> + Color mask for all the above LEDs:
> +  [bit3,bit2,bit1,bit0] or
> +  [bit7,bit6,bit5,bit4]:
> +	[0,0,0,0] = LED OFF
> +	[0,1,0,1] = Red static ON
> +	[1,1,0,1] = Green static ON
> +	[0,1,1,0] = Red blink 3Hz
> +	[1,1,1,0] = Green blink 3Hz
> +	[0,1,1,1] = Red blink 6Hz
> +	[1,1,1,1] = Green blink 6Hz
> +
> +Driver provides the following LEDs for the system "msn2100":
> +  mlxcpld:fan:green
> +  mlxcpld:fan:red
> +  mlxcpld:psu1:green
> +  mlxcpld:psu1:red
> +  mlxcpld:psu2:green
> +  mlxcpld:psu2:red
> +  mlxcpld:status:green
> +  mlxcpld:status:red
> +  mlxcpld:uid:blue
> +
> + "status"
> +  CPLD reg offset: 0x20
> +  Bits [3:0]
> +
> + "fan"
> +  CPLD reg offset: 0x21
> +  Bits [3:0]
> +
> + "psu1"
> +  CPLD reg offset: 0x23
> +  Bits [3:0]
> +
> + "psu2"
> +  CPLD reg offset: 0x23
> +  Bits [7:4]
> +
> + "uid"
> +  CPLD reg offset: 0x24
> +  Bits [3:0]
> +
> + Color mask for all the above LEDs, excepted uid:
> +  [bit3,bit2,bit1,bit0] or
> +  [bit7,bit6,bit5,bit4]:
> +	[0,0,0,0] = LED OFF
> +	[0,1,0,1] = Red static ON
> +	[1,1,0,1] = Green static ON
> +	[0,1,1,0] = Red blink 3Hz
> +	[1,1,1,0] = Green blink 3Hz
> +	[0,1,1,1] = Red blink 6Hz
> +	[1,1,1,1] = Green blink 6Hz
> +
> + Color mask for uid LED:
> +  [bit3,bit2,bit1,bit0]:
> +	[0,0,0,0] = LED OFF
> +	[1,1,0,1] = Blue static ON
> +	[1,1,1,0] = Blue blink 3Hz
> +	[1,1,1,1] = Blue blink 6Hz
> +
> +Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
> +For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0bbe4b1..adb9e9b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7655,6 +7655,14 @@ W:	http://www.mellanox.com
>  Q:	http://patchwork.ozlabs.org/project/netdev/list/
>  F:	drivers/net/ethernet/mellanox/mlxsw/
>
> +MELLANOX MLXCPLD LED DRIVER
> +M:	Vadim Pasternak <vadimp@...lanox.com>
> +L:	linux-leds@...r.kernel.org
> +S:	Supported
> +W:	http://www.mellanox.com
> +F:	drivers/leds/leds-mlxcpld.c
> +F:	Documentation/leds/leds-mlxcpld.txt
> +
>  SOFT-ROCE DRIVER (rxe)
>  M:	Moni Shoua <monis@...lanox.com>
>  L:	linux-rdma@...r.kernel.org
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 9dcc9b1..4cd85be 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -631,6 +631,14 @@ config LEDS_VERSATILE
>  	  This option enabled support for the LEDs on the ARM Versatile
>  	  and RealView boards. Say Y to enabled these.
>
> +config LEDS_MLXCPLD
> +	tristate "LED support for the Mellanox boards"
> +	depends on X86_64 && DMI
> +	depends on LEDS_CLASS
> +	help
> +	  This option enabled support for the LEDs on the Mellanox
> +	  boards. Say Y to enabled these.
> +
>  comment "LED Triggers"
>  source "drivers/leds/trigger/Kconfig"
>
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 0684c86..9a2494b 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -68,6 +68,7 @@ obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
>  obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
>  obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
>  obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
> +obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
>
>  # LED SPI Drivers
>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> new file mode 100644
> index 0000000..10b03c5
> --- /dev/null
> +++ b/drivers/leds/leds-mlxcpld.c
> @@ -0,0 +1,429 @@
> +/*
> + * drivers/leds/leds-mlxcpld.c
> + * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
> + * Copyright (c) 2016 Vadim Pasternak <vadimp@...lanox.com>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + * 3. Neither the names of the copyright holders nor the names of its
> + *    contributors may be used to endorse or promote products derived from
> + *    this software without specific prior written permission.
> + *
> + * Alternatively, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") version 2 as published by the Free
> + * Software Foundation.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
> + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
> + * POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/dmi.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/version.h>
> +
> +#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR     0x2500 /* LPC bus access */
> +
> +/* Color codes for LEDs */
> +#define MLXCPLD_LED_OFFSET_HALF		0x01 /* Offset from solid: 3Hz blink */
> +#define MLXCPLD_LED_OFFSET_FULL		0x02 /* Offset from solid: 6Hz blink */
> +#define MLXCPLD_LED_IS_OFF		0x00 /* Off */
> +#define MLXCPLD_LED_RED_STATIC_ON	0x05 /* Solid red */
> +#define MLXCPLD_LED_RED_BLINK_HALF	(MLXCPLD_LED_RED_STATIC_ON + \
> +					 MLXCPLD_LED_OFFSET_HALF)
> +#define MLXCPLD_LED_RED_BLINK_FULL	(MLXCPLD_LED_RED_STATIC_ON + \
> +					 MLXCPLD_LED_OFFSET_FULL)
> +#define MLXCPLD_LED_GREEN_STATIC_ON	0x0D /* Solid green */
> +#define MLXCPLD_LED_GREEN_BLINK_HALF	(MLXCPLD_LED_GREEN_STATIC_ON + \
> +					 MLXCPLD_LED_OFFSET_HALF)
> +#define MLXCPLD_LED_GREEN_BLINK_FULL	(MLXCPLD_LED_GREEN_STATIC_ON + \
> +					 MLXCPLD_LED_OFFSET_FULL)
> +#define MLXCPLD_LED_BLINK_3HZ		167 /* ~167 msec off/on */
> +#define MLXCPLD_LED_BLINK_6HZ		83 /* ~83 msec off/on */
> +
> +/**
> + * mlxcpld_param - LED access parameters:
> + * @offset - offset for LED access in CPLD device
> + * @mask - mask for LED access in CPLD device
> + * @base_color - base color code for LED
> +**/
> +struct mlxcpld_param {
> +	u8 offset;
> +	u8 mask;
> +	u8 base_color;
> +};
> +
> +/**
> + * mlxcpld_led_priv - LED private data:
> + * @cled - LED class device instance
> + * @param - LED CPLD access parameters
> +**/
> +struct mlxcpld_led_priv {
> +	struct led_classdev cdev;
> +	struct mlxcpld_param param;
> +};
> +
> +#define cdev_to_priv(c)		container_of(c, struct mlxcpld_led_priv, cdev)
> +
> +/**
> + * mlxcpld_led_profile - system LED profile (defined per system class):
> + * @offset - offset for LED access in CPLD device
> + * @mask - mask for LED access in CPLD device
> + * @base_color - base color code
> + * @brightness - default brightness setting (on/off)
> + * @name - LED name
> +**/
> +struct mlxcpld_led_profile {
> +	u8 offset;
> +	u8 mask;
> +	u8 base_color;
> +	enum led_brightness brightness;
> +	const char *name;
> +};
> +
> +/**
> + * mlxcpld_led_pdata - system LED private data
> + * @pdev - platform device pointer
> + * @pled - LED class device instance
> + * @profile - system configuration profile
> + * @num_led_instances - number of LED instances
> + * @lock - device access lock
> +**/
> +struct mlxcpld_led_pdata {
> +	struct platform_device *pdev;
> +	struct mlxcpld_led_priv *pled;
> +	struct mlxcpld_led_profile *profile;
> +	int num_led_instances;
> +	spinlock_t lock;
> +};
> +
> +static struct mlxcpld_led_pdata *mlxcpld_led;
> +
> +/* Default profile fit the next Mellanox systems:
> + * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
> + * "msn2410", "msb7800", "msn2740"
> + */
> +struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
> +	{
> +		0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:fan1:green",
> +	},
> +	{
> +		0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:fan1:red",
> +	},
> +	{
> +		0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:fan2:green",
> +	},
> +	{
> +		0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:fan2:red",
> +	},
> +	{
> +		0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:fan3:green",
> +	},
> +	{
> +		0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:fan3:red",
> +	},
> +	{
> +		0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:fan4:green",
> +	},
> +	{
> +		0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:fan4:red",
> +	},
> +	{
> +		0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:psu:green",
> +	},
> +	{
> +		0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:psu:red",
> +	},
> +	{
> +		0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:status:green",
> +	},
> +	{
> +		0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:status:red",
> +	},
> +};
> +
> +/* Profile fit the Mellanox systems based on "msn2100" */
> +struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
> +	{
> +		0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:fan:green",
> +	},
> +	{
> +		0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:fan:red",
> +	},
> +	{
> +		0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:psu1:green",
> +	},
> +	{
> +		0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:psu1:red",
> +	},
> +	{
> +		0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:psu2:green",
> +	},
> +	{
> +		0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:psu2:red",
> +	},
> +	{
> +		0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> +		"mlxcpld:status:green",
> +	},
> +	{
> +		0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> +		"mlxcpld:status:red",
> +	},
> +	{
> +		0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF,
> +		"mlxcpld:uid:blue",
> +	},
> +};
> +
> +enum mlxcpld_led_platform_types {
> +	MLXCPLD_LED_PLATFORM_DEFAULT,
> +	MLXCPLD_LED_PLATFORM_MSN2100,
> +};
> +
> +const char *mlx_product_names[] = {
> +	"DEFAULT",
> +	"MSN2100",
> +};
> +
> +static enum
> +mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
> +{
> +	const char *mlx_product_name;
> +	int i;
> +
> +	mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
> +	if (!mlx_product_name)
> +		return MLXCPLD_LED_PLATFORM_DEFAULT;
> +
> +	for (i = 1;  i < ARRAY_SIZE(mlx_product_names); i++) {
> +		if (strstr(mlx_product_name, mlx_product_names[i]))
> +			return i;
> +	}
> +
> +	return MLXCPLD_LED_PLATFORM_DEFAULT;
> +}
> +
> +static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
> +					u8 *data)
> +{
> +	u32 addr = base + offset;
> +
> +	if (rw_flag == 0)
> +		outb(*data, addr);
> +	else
> +		*data = inb(addr);
> +}
> +
> +static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
> +{
> +	u8 nib, val;
> +
> +	/*
> +	 * Each LED is controlled through low or high nibble of the relevant
> +	 * CPLD register. Register offset is specified by off parameter.
> +	 * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> +	 * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> +	 * green.
> +	 * Parameter mask specifies which nibble is used for specific LED: mask
> +	 * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> +	 * higher nibble (bits from 4 to 7).
> +	 */
> +	spin_lock(&mlxcpld_led->lock);
> +	mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1,
> +				    &val);
> +	nib = (mask == 0xf0) ? vset : (vset << 4);
> +	val = (val & mask) | nib;
> +	mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0,
> +				    &val);
> +	spin_unlock(&mlxcpld_led->lock);
> +}
> +
> +static void mlxcpld_led_set_brightness(struct led_classdev *led,
> +				       enum led_brightness value)\

For consistency with the op name it will be better to rename it to
mlxcpld_led_brightness_set.

> +{
> +	struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> +
> +	if (value) {
> +		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> +				     pled->param.base_color);
> +		return;
> +	}
> +
> +	mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> +			     MLXCPLD_LED_IS_OFF);
> +}
> +
> +static int mlxcpld_led_blink_set(struct led_classdev *led,
> +				 unsigned long *delay_on,
> +				 unsigned long *delay_off)
> +{
> +	struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> +
> +	/* HW supports two types of blinking: full (6Hz) and half (3Hz).
> +	 * For delay on/off zero default setting 3Hz is used.
> +	 */
> +	if (!(*delay_on == 0 && *delay_off == 0) &&
> +	    !(*delay_on == MLXCPLD_LED_BLINK_3HZ &&
> +	      *delay_off == MLXCPLD_LED_BLINK_3HZ) &&
> +	    !(*delay_on == MLXCPLD_LED_BLINK_6HZ &&
> +	      *delay_off == MLXCPLD_LED_BLINK_6HZ))
> +		return -EINVAL;
> +
> +	if (*delay_on == MLXCPLD_LED_BLINK_6HZ)
> +		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> +				     pled->param.base_color +
> +				     MLXCPLD_LED_OFFSET_FULL);
> +	else
> +		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> +				     pled->param.base_color +
> +				     MLXCPLD_LED_OFFSET_HALF);
> +
> +	return 0;
> +}
> +
> +static int mlxcpld_led_config(struct device *dev,
> +			      struct mlxcpld_led_pdata *cpld)
> +{
> +	int i;
> +	int err;
> +
> +	cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
> +				  cpld->num_led_instances, GFP_KERNEL);
> +	if (!cpld->pled)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < cpld->num_led_instances; i++) {
> +		cpld->pled[i].cdev.name = cpld->profile[i].name;
> +		cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
> +		cpld->pled[i].cdev.max_brightness = 1;
> +		cpld->pled[i].cdev.brightness_set = mlxcpld_led_set_brightness;
> +		cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set;
> +		cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
> +		err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
> +		if (err)
> +			return err;
> +
> +		cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
> +		cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
> +		cpld->pled[i].param.base_color =
> +					mlxcpld_led->profile[i].base_color;
> +
> +		if (mlxcpld_led->profile[i].brightness)
> +			mlxcpld_led_set_brightness(&cpld->pled[i].cdev,
> +					mlxcpld_led->profile[i].brightness);
> +	}
> +
> +	return 0;
> +}
> +
> +static int __init mlxcpld_led_probe(struct platform_device *pdev)
> +{
> +	enum mlxcpld_led_platform_types mlxcpld_led_plat =
> +					mlxcpld_led_platform_check_sys_type();
> +
> +	mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
> +				   GFP_KERNEL);
> +	if (!mlxcpld_led)
> +		return -ENOMEM;
> +
> +	mlxcpld_led->pdev = pdev;
> +
> +	switch (mlxcpld_led_plat) {
> +	case MLXCPLD_LED_PLATFORM_MSN2100:
> +		mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
> +		mlxcpld_led->num_led_instances =
> +				ARRAY_SIZE(mlxcpld_led_msn2100_profile);
> +		break;
> +
> +	default:
> +		mlxcpld_led->profile = mlxcpld_led_default_profile;
> +		mlxcpld_led->num_led_instances =
> +				ARRAY_SIZE(mlxcpld_led_default_profile);
> +		break;
> +	}
> +
> +	spin_lock_init(&mlxcpld_led->lock);
> +
> +	return mlxcpld_led_config(&pdev->dev, mlxcpld_led);
> +}
> +
> +static struct platform_driver mlxcpld_led_driver = {
> +	.driver = {
> +		.name	= KBUILD_MODNAME,
> +	},
> +};
> +
> +static int __init mlxcpld_led_init(void)
> +{
> +	struct platform_device *pdev;
> +	int err;
> +
> +	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
> +	if (!pdev) {
> +		pr_err("Device allocation failed\n");
> +		return -ENOMEM;
> +	}
> +
> +	err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
> +	if (err) {
> +		pr_err("Probe platform driver failed\n");
> +		platform_device_unregister(pdev);
> +	}
> +
> +	return err;
> +}
> +
> +static void __exit mlxcpld_led_exit(void)
> +{
> +	platform_device_unregister(mlxcpld_led->pdev);
> +	platform_driver_unregister(&mlxcpld_led_driver);
> +}
> +
> +module_init(mlxcpld_led_init);
> +module_exit(mlxcpld_led_exit);
> +
> +MODULE_AUTHOR("Vadim Pasternak (vadimp@...lanox.com)");

We usually use angle brackets around the email address,
so let's change it to:

MODULE_AUTHOR("Vadim Pasternak <vadimp@...lanox.com>");

> +MODULE_DESCRIPTION("Mellanox board LED driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:leds_mlxcpld");
>


-- 
Best regards,
Jacek Anaszewski

Powered by blists - more mailing lists