linux-kernel - [PATCH 4/4] ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1473344836-26707-5-git-send-email-ayaka@soulik.info>
Date:   Thu,  8 Sep 2016 22:27:16 +0800
From:   Randy Li <ayaka@...lik.info>
To:     linux-usb@...r.kernel.org
Cc:     John.Youn@...opsys.com, kishon@...com,
        felipe.balbi@...ux.intel.com, mark.rutland@....com,
        devicetree@...r.kernel.org, heiko@...ech.de,
        gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
        linux-rockchip@...ts.infradead.org, robh+dt@...nel.org,
        randy.li@...k-chips.com, Randy Li <ayaka@...lik.info>
Subject: [PATCH 4/4] ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset

The "host1" port (AKA the dwc2 port that isn't the OTG port) on rk3288
has a hardware errata that causes everything to get confused when we get
a remote wakeup.  We'll use the reset that's in the CRU to reset the
port when it's in a bad state.

Note that we add the reset to both dwc2 controllers even though only one
has the errata in case we find some other use for this reset that's
unrelated to the current hardware errata.  Only the host port gets the
quirk property, though.

Signed-off-by: Randy Li <ayaka@...lik.info>
---
 arch/arm/boot/dts/rk3288.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 17ec2e2..34de803 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -857,6 +857,8 @@
 				clocks = <&cru SCLK_OTGPHY0>;
 				clock-names = "phyclk";
 				#clock-cells = <0>;
+				resets = <&cru SRST_USBOTG_PHY>;
+				reset-names = "phy-reset";
 			};
 
 			usbphy1: usb-phy@334 {
@@ -873,6 +875,8 @@
 				clocks = <&cru SCLK_OTGPHY2>;
 				clock-names = "phyclk";
 				#clock-cells = <0>;
+				resets = <&cru SRST_USBHOST1_PHY>;
+				reset-names = "phy-reset";
 			};
 		};
 	};
-- 
2.7.4