| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM5PR0501MB20979261B70C6240DDD1DF94A2FB0@AM5PR0501MB2097.eurprd05.prod.outlook.com>
Date: Thu, 8 Sep 2016 07:45:17 +0000
From: Vadim Pasternak <vadimp@...lanox.com>
To: Jacek Anaszewski <j.anaszewski@...sung.com>,
"rpurdie@...ys.net" <rpurdie@...ys.net>
CC: "dave@...blig.org" <dave@...blig.org>,
"linux-leds@...r.kernel.org" <linux-leds@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"jiri@...nulli.us" <jiri@...nulli.us>,
Michael Shych <michaelsh@...lanox.com>
Subject: RE: [patch v4] leds: add driver for Mellanox systems LEDs
Hi Jacek,
Thank you very much for all your great reviews.
Only it should be "mlxcpld", instead of "mkxcpld".
> -----Original Message-----
> From: Jacek Anaszewski [mailto:j.anaszewski@...sung.com]
> Sent: Thursday, September 08, 2016 10:41 AM
> To: Vadim Pasternak <vadimp@...lanox.com>; rpurdie@...ys.net
> Cc: dave@...blig.org; linux-leds@...r.kernel.org; linux-kernel@...r.kernel.org;
> jiri@...nulli.us; Michael Shych <michaelsh@...lanox.com>
> Subject: Re: [patch v4] leds: add driver for Mellanox systems LEDs
>
> Hi Vadim,
>
> Thanks for the updated version. I found few more minor issues, please look
> below.
>
> I actually have them fixed, so the patch is ready for being applied to the linux-
> leds.git.
>
> Please refer below and let me know if you have any objections.
>
> On 09/08/2016 09:25 AM, vadimp@...lanox.com wrote:
> > From: Vadim Pasternak <vadimp@...lanox.com>
> >
> > This makes it possible to create a set of LEDs for Mellanox systems:
> > "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
> > "msb7800", "msn2740", "msn2100".
> >
> > Driver obtains LED devices according to system configuration, provided
> > through system DMI data, like fan1:green, fan1:red and creates devices
> > in
>
> s/fan1:green/mkxcpld:fan1:green/
> s/fan1:red/mkxcpld:fan1:red/
> s/mkxcpld:fan1:green/mlxcpld:fan1:green/
> s/mkxcpld:fan1:red/mlxcpld:fan1:red/
>
> > form: "devicename:colour:function".
> >
> > LED setting is controlled through on board CPLD Lattice device.
> > For setting particular LED off, solid, blink:
> > echo 0 > /sys/class/leds/mlxcpld\:status\:green/brightness
> > echo 1 > /sys/class/leds/mlxcpld\:status\:green/brightness
> > echo timer > /sys/class/leds/mlxcpld\:status\:green/trigger
> >
> > On module probing all LEDs are set green, on removing - off.
> >
> > Last setting overwrites previous, f.e. sequence for changing LED from
> > green - red - green:
> > echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness
> > echo 1 > /sys/class/leds/mlxcpld\:psu\:red/brightness
> > echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness
> > Note: LEDs cannot be turned on/off simultaneously.
> >
> > The Kconfig currently controlling compilation of this code is:
> > drivers/leds/Kconfig:config LEDS_MLXCPLD
> >
> > Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
> > Reviewed-by: Jiri Pirko <jiri@...lanox.com>
> > ---
> > v3->v4
> > Fixes issues pointed out by Jacek:
> > - change in all commnets led to LED;
> > - add in defines prefix MLXCPLD;
> > - add to LED names device prefix mlxcpld;
> > - fix long comment stile;
> > - replace mlxcpld_led_brightness by mlxcpld_led_set_brightness;
> > - replace mlxcpld_led_blink by mlxcpld_led_blink_set
> > ---
> > v2->v3:
> > Fixes issues pointed out by Dave:
> > - fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively;
> > ---
> > v1->v2:
> > Fixes issues pointed out by Jacek:
> > - fix style in patch cover text;
> > - add doc file with hw description;
> > - arrange include directives in alphabetical order;
> > - make defines more clear;
> > - fix several comments for structure descriptions;
> > - add several empty lines between defentions;
> > - change max_brightness profile setting to 1 instead of LED_FULL;
> > - use capital letters for the enumerator;
> > - change in if (product == NULL) to (!product);
> > - add comments to mlxcpld_led_store_hw;
> > - remove switch statement from mlxcpld_led_brightness;
> > - modify mlxcpld_led_blink;
> > - remove unnecessary devm_kfree in mlxcpld_led_config;
> > - remove switch statement from mlxcpld_led_config;
> > - remove platform_get_drvdata from mlxcpld_led_probe;
> > ---
> > Documentation/leds/leds-mlxcpld.txt | 110 +++++++++
> > MAINTAINERS | 8 +
> > drivers/leds/Kconfig | 8 +
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-mlxcpld.c | 429
> ++++++++++++++++++++++++++++++++++++
> > 5 files changed, 556 insertions(+)
> > create mode 100644 Documentation/leds/leds-mlxcpld.txt
> > create mode 100644 drivers/leds/leds-mlxcpld.c
> >
> > diff --git a/Documentation/leds/leds-mlxcpld.txt
> > b/Documentation/leds/leds-mlxcpld.txt
> > new file mode 100644
> > index 0000000..7b4c2a3
> > --- /dev/null
> > +++ b/Documentation/leds/leds-mlxcpld.txt
> > @@ -0,0 +1,110 @@
> > +ver LEDs-mlxcpld
> > +==========================
> > +Driver for Mellanox systems LEDs.
> > +Provide system LED support for the nex Mellanox systems:
> > +"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
> > +"msb7800", "msn2740", "msn2100".
> > +
> > +Description
> > +-----------
> > +Driver provides the following LEDs for the systems "msx6710",
> > +"msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800",
> "msn2740":
> > + mlxcpld:fan1:green
> > + mlxcpld:fan1:red
> > + mlxcpld:fan2:green
> > + mlxcpld:fan2:red
> > + mlxcpld:fan3:green
> > + mlxcpld:fan3:red
> > + mlxcpld:fan4:green
> > + mlxcpld:fan4:red
> > + mlxcpld:psu:green
> > + mlxcpld:psu:red
> > + mlxcpld:status:green
> > + mlxcpld:status:red
> > +
> > + "status"
> > + CPLD reg offset: 0x20
> > + Bits [3:0]
> > +
> > + "psu"
> > + CPLD reg offset: 0x20
> > + Bits [7:4]
> > +
> > + "fan1"
> > + CPLD reg offset: 0x21
> > + Bits [3:0]
> > +
> > + "fan2"
> > + CPLD reg offset: 0x21
> > + Bits [7:4]
> > +
> > + "fan3"
> > + CPLD reg offset: 0x22
> > + Bits [3:0]
> > +
> > + "fan4"
> > + CPLD reg offset: 0x22
> > + Bits [7:4]
> > +
> > + Color mask for all the above LEDs:
> > + [bit3,bit2,bit1,bit0] or
> > + [bit7,bit6,bit5,bit4]:
> > + [0,0,0,0] = LED OFF
> > + [0,1,0,1] = Red static ON
> > + [1,1,0,1] = Green static ON
> > + [0,1,1,0] = Red blink 3Hz
> > + [1,1,1,0] = Green blink 3Hz
> > + [0,1,1,1] = Red blink 6Hz
> > + [1,1,1,1] = Green blink 6Hz
> > +
> > +Driver provides the following LEDs for the system "msn2100":
> > + mlxcpld:fan:green
> > + mlxcpld:fan:red
> > + mlxcpld:psu1:green
> > + mlxcpld:psu1:red
> > + mlxcpld:psu2:green
> > + mlxcpld:psu2:red
> > + mlxcpld:status:green
> > + mlxcpld:status:red
> > + mlxcpld:uid:blue
> > +
> > + "status"
> > + CPLD reg offset: 0x20
> > + Bits [3:0]
> > +
> > + "fan"
> > + CPLD reg offset: 0x21
> > + Bits [3:0]
> > +
> > + "psu1"
> > + CPLD reg offset: 0x23
> > + Bits [3:0]
> > +
> > + "psu2"
> > + CPLD reg offset: 0x23
> > + Bits [7:4]
> > +
> > + "uid"
> > + CPLD reg offset: 0x24
> > + Bits [3:0]
> > +
> > + Color mask for all the above LEDs, excepted uid:
> > + [bit3,bit2,bit1,bit0] or
> > + [bit7,bit6,bit5,bit4]:
> > + [0,0,0,0] = LED OFF
> > + [0,1,0,1] = Red static ON
> > + [1,1,0,1] = Green static ON
> > + [0,1,1,0] = Red blink 3Hz
> > + [1,1,1,0] = Green blink 3Hz
> > + [0,1,1,1] = Red blink 6Hz
> > + [1,1,1,1] = Green blink 6Hz
> > +
> > + Color mask for uid LED:
> > + [bit3,bit2,bit1,bit0]:
> > + [0,0,0,0] = LED OFF
> > + [1,1,0,1] = Blue static ON
> > + [1,1,1,0] = Blue blink 3Hz
> > + [1,1,1,1] = Blue blink 6Hz
> > +
> > +Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
> > +For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec.
> > diff --git a/MAINTAINERS b/MAINTAINERS index 0bbe4b1..adb9e9b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -7655,6 +7655,14 @@ W: http://www.mellanox.com
> > Q: http://patchwork.ozlabs.org/project/netdev/list/
> > F: drivers/net/ethernet/mellanox/mlxsw/
> >
> > +MELLANOX MLXCPLD LED DRIVER
> > +M: Vadim Pasternak <vadimp@...lanox.com>
> > +L: linux-leds@...r.kernel.org
> > +S: Supported
> > +W: http://www.mellanox.com
> > +F: drivers/leds/leds-mlxcpld.c
> > +F: Documentation/leds/leds-mlxcpld.txt
> > +
> > SOFT-ROCE DRIVER (rxe)
> > M: Moni Shoua <monis@...lanox.com>
> > L: linux-rdma@...r.kernel.org
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index
> > 9dcc9b1..4cd85be 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -631,6 +631,14 @@ config LEDS_VERSATILE
> > This option enabled support for the LEDs on the ARM Versatile
> > and RealView boards. Say Y to enabled these.
> >
> > +config LEDS_MLXCPLD
> > + tristate "LED support for the Mellanox boards"
> > + depends on X86_64 && DMI
> > + depends on LEDS_CLASS
> > + help
> > + This option enabled support for the LEDs on the Mellanox
> > + boards. Say Y to enabled these.
> > +
> > comment "LED Triggers"
> > source "drivers/leds/trigger/Kconfig"
> >
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index
> > 0684c86..9a2494b 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -68,6 +68,7 @@ obj-$(CONFIG_LEDS_KTD2692) += leds-
> ktd2692.o
> > obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
> > obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
> > obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
> > +obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
> >
> > # LED SPI Drivers
> > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> > diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> > new file mode 100644 index 0000000..10b03c5
> > --- /dev/null
> > +++ b/drivers/leds/leds-mlxcpld.c
> > @@ -0,0 +1,429 @@
> > +/*
> > + * drivers/leds/leds-mlxcpld.c
> > + * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
> > + * Copyright (c) 2016 Vadim Pasternak <vadimp@...lanox.com>
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions are
> met:
> > + *
> > + * 1. Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * 2. Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in the
> > + * documentation and/or other materials provided with the distribution.
> > + * 3. Neither the names of the copyright holders nor the names of its
> > + * contributors may be used to endorse or promote products derived from
> > + * this software without specific prior written permission.
> > + *
> > + * Alternatively, this software may be distributed under the terms of
> > +the
> > + * GNU General Public License ("GPL") version 2 as published by the
> > +Free
> > + * Software Foundation.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS "AS IS"
> > + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> LIMITED
> > +TO, THE
> > + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
> PARTICULAR
> > +PURPOSE
> > + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
> > +CONTRIBUTORS BE
> > + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
> > +OR
> > + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
> PROCUREMENT
> > +OF
> > + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> > +BUSINESS
> > + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> > +WHETHER IN
> > + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> > +OTHERWISE)
> > + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> > +ADVISED OF THE
> > + * POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/device.h>
> > +#include <linux/dmi.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/leds.h>
> > +#include <linux/module.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/version.h>
> > +
> > +#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access
> */
> > +
> > +/* Color codes for LEDs */
> > +#define MLXCPLD_LED_OFFSET_HALF 0x01 /* Offset from solid: 3Hz
> blink */
> > +#define MLXCPLD_LED_OFFSET_FULL 0x02 /* Offset from solid: 6Hz
> blink */
> > +#define MLXCPLD_LED_IS_OFF 0x00 /* Off */
> > +#define MLXCPLD_LED_RED_STATIC_ON 0x05 /* Solid red */
> > +#define MLXCPLD_LED_RED_BLINK_HALF
> (MLXCPLD_LED_RED_STATIC_ON + \
> > + MLXCPLD_LED_OFFSET_HALF)
> > +#define MLXCPLD_LED_RED_BLINK_FULL
> (MLXCPLD_LED_RED_STATIC_ON + \
> > + MLXCPLD_LED_OFFSET_FULL)
> > +#define MLXCPLD_LED_GREEN_STATIC_ON 0x0D /* Solid green */
> > +#define MLXCPLD_LED_GREEN_BLINK_HALF
> (MLXCPLD_LED_GREEN_STATIC_ON + \
> > + MLXCPLD_LED_OFFSET_HALF)
> > +#define MLXCPLD_LED_GREEN_BLINK_FULL
> (MLXCPLD_LED_GREEN_STATIC_ON + \
> > + MLXCPLD_LED_OFFSET_FULL)
> > +#define MLXCPLD_LED_BLINK_3HZ 167 /* ~167 msec off/on */
> > +#define MLXCPLD_LED_BLINK_6HZ 83 /* ~83 msec off/on */
> > +
> > +/**
> > + * mlxcpld_param - LED access parameters:
> > + * @offset - offset for LED access in CPLD device
> > + * @mask - mask for LED access in CPLD device
> > + * @base_color - base color code for LED **/ struct mlxcpld_param {
> > + u8 offset;
> > + u8 mask;
> > + u8 base_color;
> > +};
> > +
> > +/**
> > + * mlxcpld_led_priv - LED private data:
> > + * @cled - LED class device instance
> > + * @param - LED CPLD access parameters **/ struct mlxcpld_led_priv {
> > + struct led_classdev cdev;
> > + struct mlxcpld_param param;
> > +};
> > +
> > +#define cdev_to_priv(c) container_of(c, struct
> mlxcpld_led_priv, cdev)
> > +
> > +/**
> > + * mlxcpld_led_profile - system LED profile (defined per system class):
> > + * @offset - offset for LED access in CPLD device
> > + * @mask - mask for LED access in CPLD device
> > + * @base_color - base color code
> > + * @brightness - default brightness setting (on/off)
> > + * @name - LED name
> > +**/
> > +struct mlxcpld_led_profile {
> > + u8 offset;
> > + u8 mask;
> > + u8 base_color;
> > + enum led_brightness brightness;
> > + const char *name;
> > +};
> > +
> > +/**
> > + * mlxcpld_led_pdata - system LED private data
> > + * @pdev - platform device pointer
> > + * @pled - LED class device instance
> > + * @profile - system configuration profile
> > + * @num_led_instances - number of LED instances
> > + * @lock - device access lock
> > +**/
> > +struct mlxcpld_led_pdata {
> > + struct platform_device *pdev;
> > + struct mlxcpld_led_priv *pled;
> > + struct mlxcpld_led_profile *profile;
> > + int num_led_instances;
> > + spinlock_t lock;
> > +};
> > +
> > +static struct mlxcpld_led_pdata *mlxcpld_led;
> > +
> > +/* Default profile fit the next Mellanox systems:
> > + * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
> > + * "msn2410", "msb7800", "msn2740"
> > + */
> > +struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
> > + {
> > + 0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:fan1:green",
> > + },
> > + {
> > + 0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:fan1:red",
> > + },
> > + {
> > + 0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:fan2:green",
> > + },
> > + {
> > + 0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:fan2:red",
> > + },
> > + {
> > + 0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:fan3:green",
> > + },
> > + {
> > + 0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:fan3:red",
> > + },
> > + {
> > + 0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:fan4:green",
> > + },
> > + {
> > + 0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:fan4:red",
> > + },
> > + {
> > + 0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:psu:green",
> > + },
> > + {
> > + 0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:psu:red",
> > + },
> > + {
> > + 0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:status:green",
> > + },
> > + {
> > + 0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:status:red",
> > + },
> > +};
> > +
> > +/* Profile fit the Mellanox systems based on "msn2100" */ struct
> > +mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
> > + {
> > + 0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:fan:green",
> > + },
> > + {
> > + 0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:fan:red",
> > + },
> > + {
> > + 0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:psu1:green",
> > + },
> > + {
> > + 0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:psu1:red",
> > + },
> > + {
> > + 0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:psu2:green",
> > + },
> > + {
> > + 0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:psu2:red",
> > + },
> > + {
> > + 0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
> > + "mlxcpld:status:green",
> > + },
> > + {
> > + 0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
> > + "mlxcpld:status:red",
> > + },
> > + {
> > + 0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF,
> > + "mlxcpld:uid:blue",
> > + },
> > +};
> > +
> > +enum mlxcpld_led_platform_types {
> > + MLXCPLD_LED_PLATFORM_DEFAULT,
> > + MLXCPLD_LED_PLATFORM_MSN2100,
> > +};
> > +
> > +const char *mlx_product_names[] = {
> > + "DEFAULT",
> > + "MSN2100",
> > +};
> > +
> > +static enum
> > +mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
> > +{
> > + const char *mlx_product_name;
> > + int i;
> > +
> > + mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
> > + if (!mlx_product_name)
> > + return MLXCPLD_LED_PLATFORM_DEFAULT;
> > +
> > + for (i = 1; i < ARRAY_SIZE(mlx_product_names); i++) {
> > + if (strstr(mlx_product_name, mlx_product_names[i]))
> > + return i;
> > + }
> > +
> > + return MLXCPLD_LED_PLATFORM_DEFAULT; }
> > +
> > +static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
> > + u8 *data)
> > +{
> > + u32 addr = base + offset;
> > +
> > + if (rw_flag == 0)
> > + outb(*data, addr);
> > + else
> > + *data = inb(addr);
> > +}
> > +
> > +static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset) {
> > + u8 nib, val;
> > +
> > + /*
> > + * Each LED is controlled through low or high nibble of the relevant
> > + * CPLD register. Register offset is specified by off parameter.
> > + * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> > + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> > + * green.
> > + * Parameter mask specifies which nibble is used for specific LED: mask
> > + * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> > + * higher nibble (bits from 4 to 7).
> > + */
> > + spin_lock(&mlxcpld_led->lock);
> > + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
> off, 1,
> > + &val);
> > + nib = (mask == 0xf0) ? vset : (vset << 4);
> > + val = (val & mask) | nib;
> > + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
> off, 0,
> > + &val);
> > + spin_unlock(&mlxcpld_led->lock);
> > +}
> > +
> > +static void mlxcpld_led_set_brightness(struct led_classdev *led,
> > + enum led_brightness value)\
>
> For consistency with the op name it will be better to rename it to
> mlxcpld_led_brightness_set.
>
> > +{
> > + struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> > +
> > + if (value) {
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + pled->param.base_color);
> > + return;
> > + }
> > +
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + MLXCPLD_LED_IS_OFF);
> > +}
> > +
> > +static int mlxcpld_led_blink_set(struct led_classdev *led,
> > + unsigned long *delay_on,
> > + unsigned long *delay_off)
> > +{
> > + struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> > +
> > + /* HW supports two types of blinking: full (6Hz) and half (3Hz).
> > + * For delay on/off zero default setting 3Hz is used.
> > + */
> > + if (!(*delay_on == 0 && *delay_off == 0) &&
> > + !(*delay_on == MLXCPLD_LED_BLINK_3HZ &&
> > + *delay_off == MLXCPLD_LED_BLINK_3HZ) &&
> > + !(*delay_on == MLXCPLD_LED_BLINK_6HZ &&
> > + *delay_off == MLXCPLD_LED_BLINK_6HZ))
> > + return -EINVAL;
> > +
> > + if (*delay_on == MLXCPLD_LED_BLINK_6HZ)
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + pled->param.base_color +
> > + MLXCPLD_LED_OFFSET_FULL);
> > + else
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + pled->param.base_color +
> > + MLXCPLD_LED_OFFSET_HALF);
> > +
> > + return 0;
> > +}
> > +
> > +static int mlxcpld_led_config(struct device *dev,
> > + struct mlxcpld_led_pdata *cpld) {
> > + int i;
> > + int err;
> > +
> > + cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
> > + cpld->num_led_instances, GFP_KERNEL);
> > + if (!cpld->pled)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < cpld->num_led_instances; i++) {
> > + cpld->pled[i].cdev.name = cpld->profile[i].name;
> > + cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
> > + cpld->pled[i].cdev.max_brightness = 1;
> > + cpld->pled[i].cdev.brightness_set = mlxcpld_led_set_brightness;
> > + cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set;
> > + cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
> > + err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
> > + if (err)
> > + return err;
> > +
> > + cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
> > + cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
> > + cpld->pled[i].param.base_color =
> > + mlxcpld_led->profile[i].base_color;
> > +
> > + if (mlxcpld_led->profile[i].brightness)
> > + mlxcpld_led_set_brightness(&cpld->pled[i].cdev,
> > + mlxcpld_led->profile[i].brightness);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int __init mlxcpld_led_probe(struct platform_device *pdev) {
> > + enum mlxcpld_led_platform_types mlxcpld_led_plat =
> > +
> mlxcpld_led_platform_check_sys_type();
> > +
> > + mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
> > + GFP_KERNEL);
> > + if (!mlxcpld_led)
> > + return -ENOMEM;
> > +
> > + mlxcpld_led->pdev = pdev;
> > +
> > + switch (mlxcpld_led_plat) {
> > + case MLXCPLD_LED_PLATFORM_MSN2100:
> > + mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
> > + mlxcpld_led->num_led_instances =
> > + ARRAY_SIZE(mlxcpld_led_msn2100_profile);
> > + break;
> > +
> > + default:
> > + mlxcpld_led->profile = mlxcpld_led_default_profile;
> > + mlxcpld_led->num_led_instances =
> > + ARRAY_SIZE(mlxcpld_led_default_profile);
> > + break;
> > + }
> > +
> > + spin_lock_init(&mlxcpld_led->lock);
> > +
> > + return mlxcpld_led_config(&pdev->dev, mlxcpld_led); }
> > +
> > +static struct platform_driver mlxcpld_led_driver = {
> > + .driver = {
> > + .name = KBUILD_MODNAME,
> > + },
> > +};
> > +
> > +static int __init mlxcpld_led_init(void) {
> > + struct platform_device *pdev;
> > + int err;
> > +
> > + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL,
> 0);
> > + if (!pdev) {
> > + pr_err("Device allocation failed\n");
> > + return -ENOMEM;
> > + }
> > +
> > + err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
> > + if (err) {
> > + pr_err("Probe platform driver failed\n");
> > + platform_device_unregister(pdev);
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static void __exit mlxcpld_led_exit(void) {
> > + platform_device_unregister(mlxcpld_led->pdev);
> > + platform_driver_unregister(&mlxcpld_led_driver);
> > +}
> > +
> > +module_init(mlxcpld_led_init);
> > +module_exit(mlxcpld_led_exit);
> > +
> > +MODULE_AUTHOR("Vadim Pasternak (vadimp@...lanox.com)");
>
> We usually use angle brackets around the email address, so let's change it to:
>
> MODULE_AUTHOR("Vadim Pasternak <vadimp@...lanox.com>");
>
> > +MODULE_DESCRIPTION("Mellanox board LED driver");
> MODULE_LICENSE("GPL
> > +v2"); MODULE_ALIAS("platform:leds_mlxcpld");
> >
>
>
> --
> Best regards,
> Jacek Anaszewski
Best regards,
Vadim.
Powered by blists - more mailing lists