[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <80dc63ab-d27b-017a-c0e5-c0b192880cc1@synopsys.com>
Date: Thu, 8 Sep 2016 11:09:17 -0700
From: John Youn <John.Youn@...opsys.com>
To: Randy Li <ayaka@...lik.info>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
CC: "John.Youn@...opsys.com" <John.Youn@...opsys.com>,
"kishon@...com" <kishon@...com>,
"felipe.balbi@...ux.intel.com" <felipe.balbi@...ux.intel.com>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"heiko@...ech.de" <heiko@...ech.de>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-rockchip@...ts.infradead.org"
<linux-rockchip@...ts.infradead.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"randy.li@...k-chips.com" <randy.li@...k-chips.com>
Subject: Re: [PATCH 3/4] usb: dwc2: assert phy reset when waking up in rk3288
platform
On 9/8/2016 7:27 AM, Randy Li wrote:
> On the rk3288 USB host-only port (the one that's not the OTG-enabled
> port) the PHY can get into a bad state when a wakeup is asserted (not
> just a wakeup from full system suspend but also a wakeup from
> autosuspend).
>
> We can get the PHY out of its bad state by asserting its "port reset",
> but unfortunately that seems to assert a reset onto the USB bus so it
> could confuse things if we don't actually deenumerate / reenumerate the
> device.
>
> We can also get the PHY out of its bad state by fully resetting it using
> the reset from the CRU (clock reset unit) in chip, which does a more full
> reset. The CRU-based reset appears to actually cause devices on the bus
> to be removed and reinserted, which fixes the problem (albeit in a hacky
> way).
>
> It's unfortunate that we need to do a full re-enumeration of devices at
> wakeup time, but this is better than alternative of letting the bus get
> wedged.
>
> Signed-off-by: Randy Li <ayaka@...lik.info>
> ---
> drivers/usb/dwc2/core_intr.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
> index d85c5c9..5b9b671 100644
> --- a/drivers/usb/dwc2/core_intr.c
> +++ b/drivers/usb/dwc2/core_intr.c
> @@ -345,6 +345,7 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
> static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
> {
> int ret;
> + struct device_node *np = hsotg->dev->of_node;
>
> /* Clear interrupt */
> dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
> @@ -379,6 +380,16 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
> /* Restart the Phy Clock */
> pcgcctl &= ~PCGCTL_STOPPCLK;
> dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
> +
> + /*
> + * It is a quirk in Rockchip RK3288, causing by
> + * a hardware bug. This will propagate out and
> + * eventually we'll re-enumerate the device.
> + * Not great but the best we can do
Hi Randy,
Please run ./scripts/checkpatch.pl on your patches and fix trailing
whitespace in above two lines.
Thanks,
John
Powered by blists - more mailing lists