Message-ID: <113351180.Ph1TMAdx8I@phil>
Date:   Sat, 10 Sep 2016 15:27:01 +0200
From:   Heiko Stuebner <heiko@...ech.de>
To:     闫孝军 <andy.yan@...k-chips.com>
Cc:     devicetree <devicetree@...r.kernel.org>,
        briannorris <briannorris@...omium.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        robh+dt <robh+dt@...nel.org>,
        "mark. rutland" <mark.rutland@....com>
Subject: Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board

Hi Andy,

Am Samstag, 10. September 2016, 21:10:35 CEST schrieb 闫孝军:
> Hi Heiko：
> From: Heiko Stuebner
> Date: 2016-09-10 18:07
> To: Andy Yan
> CC: devicetree; briannorris; linux-kernel; robh+dt; mark.rutland
> Subject: Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
> Am Samstag, 10. September 2016, 12:03:38 CEST schrieb Heiko Stuebner:
> 
> > Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
> > 
> > > PX3 board is designed by Rockchip for automotive field,
> > > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> > > video input/output interface, WIFI/BT/GPS(on a module
> > > named S500 which based on MT6620), Gsensor BMA250E and
> > > light&proximity sensor STK3410.
> > > 
> > > Signed-off-by: Andy Yan <andy.yan@...k-chips.com>
> > 
> > 
> > [...]
> > 
> > 
> > > diff --git a/arch/arm/boot/dts/rk3188-px3.dts
> > > b/arch/arm/boot/dts/rk3188-px3.dts new file mode 100644
> > > index 0000000..ece45d7
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/rk3188-px3.dts
> > > @@ -0,0 +1,337 @@
> > > +/*
> > > + * Copyright (c) 2016 Andy Yan <andy.yan@...k-chips.com>
> > > + *
> > > + * This file is dual-licensed: you can use it either under the terms
> > > + * of the GPL or the X11 license, at your option. Note that this dual
> > > + * licensing only applies to this file, and not this project as a
> > > + * whole.
> > > + *
> > > + *  a) This file is free software; you can redistribute it and/or
> > > + *     modify it under the terms of the GNU General Public License as
> > > + *     published by the Free Software Foundation; either version 2 of
> > > the
> > > + *     License, or (at your option) any later version.
> > > + *
> > > + *     This file is distributed in the hope that it will be useful,
> > > + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > > + *     GNU General Public License for more details.
> > > + *
> > > + * Or, alternatively,
> > > + *
> > > + *  b) Permission is hereby granted, free of charge, to any person
> > > + *     obtaining a copy of this software and associated documentation
> > > + *     files (the "Software"), to deal in the Software without
> > > + *     restriction, including without limitation the rights to use,
> > > + *     copy, modify, merge, publish, distribute, sublicense, and/or
> > > + *     sell copies of the Software, and to permit persons to whom the
> > > + *     Software is furnished to do so, subject to the following
> > > + *     conditions:
> > > + *
> > > + *     The above copyright notice and this permission notice shall be
> > > + *     included in all copies or substantial portions of the Software.
> > > + *
> > > + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > > + *     OTHER DEALINGS IN THE SOFTWARE.
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include <dt-bindings/input/input.h>
> > > +#include "rk3188.dtsi"
> > > +
> > > +/ {
> > > + model = "Rockchip PX3";
> > > + compatible = "rockchip,px3", "rockchip,rk3188";
> > > +
> > > + chosen {
> > > + bootargs = "console=ttyS2,115200 earlyprintk";
> > > + };
> > 
> > 
> > setting bootargs isn't favoured, you can instead use
> > stdout-path = "serial2:115200n8";
> > 
> > to define the default console
> > 
> > 
> > > +&i2c0 {
> > > + status = "okay";
> > > +
> > > + /* Accelerometer */
> > > + bma250@18 {
> > > + compatible = "bma250";
> > > + reg = <0x18>;
> > > + interrupt-parent = <&gpio0>;
> > > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> > > + };
> > 
> > 
> > driver seems to be missing a devicetree binding (module_id_table
> > and dt-binding document)
> 
> 
> found it, should be
> 
> bosch,bma250
> 
> according to Documentation/devicetree/bindings/iio/accel/bma180.txt
> 
> 
> 
> 
> But I found the i2c_device_id in the source code is "bma250", not
> "bosch,bma250"
 
> according to drivers/iio/accel/bma180.c

According to [0]:

"If it is i2c, i2c has the quirk that it will match drv name to
compatible string with vendor prefix dropped."

so the driver itself doesn't need to specifiy the full compatible after all. 
Still there should be a binding document and the devicetree side should 
_always_ specify the full vendor,chip format.


So you do "bosch,bma250" in the dts according to the binding document, the 
i2c-core automatically tries "bma250" from that to match against the driver.

The STK3310 can be done similarly, you only need to add a dts binding 
document.


[0] https://patchwork.kernel.org/patch/9285405/

Powered by blists - more mailing lists