| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGb2v65JZ7gnOZ_LkkvGv5-bqXeK1E1O3eno85zYBSndNpN=Qw@mail.gmail.com>
Date: Sat, 10 Sep 2016 10:33:22 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Chen-Yu Tsai <wens@...e.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Andre Przywara <andre.przywara@....com>,
linux-clk <linux-clk@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH v2 4/4] arm64: dts: add Pine64 support
Hi,
On Sat, Sep 10, 2016 at 4:10 AM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> From: Andre Przywara <andre.przywara@....com>
>
> The Pine64 is a cost-efficient development board based on the
> Allwinner A64 SoC.
> There are three models: the basic version with Fast Ethernet and
> 512 MB of DRAM (Pine64) and two Pine64+ versions, which both
> feature Gigabit Ethernet and additional connectors for touchscreens
> and a camera. Or as my son put it: "Those are smaller and these are
> missing." ;-)
> The two Pine64+ models just differ in the amount of DRAM
> (1GB vs. 2GB). Since U-Boot will figure out the right size for us and
> patches the DT accordingly we just need to provide one DT for the
> Pine64+.
>
> Signed-off-by: Andre Przywara <andre.przywara@....com>
> [Maxime: Removed the common DTSI and include directly the pine64 DTS]
> Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> ---
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/allwinner/Makefile | 5 ++
> .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 ++++++++++++++++
> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 70 ++++++++++++++++++++++
> 4 files changed, 126 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 6e199c903676..ddcbf5a2c17e 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,4 +1,5 @@
> dts-dirs += al
> +dts-dirs += allwinner
> dts-dirs += altera
> dts-dirs += amd
> dts-dirs += amlogic
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> new file mode 100644
> index 000000000000..1e29a5ae8282
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
> new file mode 100644
> index 000000000000..790d14daaa6a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
> @@ -0,0 +1,50 @@
> +/*
> + * Copyright (c) 2016 ARM Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "sun50i-a64-pine64.dts"
> +
> +/ {
> + model = "Pine64+";
> + compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
> +
> + /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> new file mode 100644
> index 000000000000..da9bca51f5a9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (c) 2016 ARM Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +/ {
> + model = "Pine64";
> + compatible = "pine64,pine64", "allwinner,sun50i-a64";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + status = "okay";
Schematics say this is missing an external pull-up. Has anyone tried it?
Without a pull-up any access on the i2c bus should just block.
Also this is on the RPi-2 compatible header. There's also an UART and SPI
that are standard for the RPi-2 header. We should consider enabling them
as well.
ChenYu
> +};
> --
> 2.9.3
>
Powered by blists - more mailing lists