lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160910040930.25988-6-salil.mehta@huawei.com>
Date:   Sat, 10 Sep 2016 05:09:27 +0100
From:   Salil Mehta <salil.mehta@...wei.com>
To:     <dledford@...hat.com>
CC:     <salil.mehta@...wei.com>, <xavier.huwei@...wei.com>,
        <oulijun@...wei.com>, <yisen.zhuang@...wei.com>,
        <mehta.salil.lnk@...il.com>, <linux-rdma@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linuxarm@...wei.com>,
        Kejian Yan <yankejian@...wei.com>
Subject: [PATCH for-next 5/8] net: hns: fix port not available after testing loopback

From: Kejian Yan <yankejian@...wei.com>

After running command "ethtool -t eth0", eth0 can not be connected to
network. It is caused by the changing the inner loopback register and
this register cannot be changed when hns connected to network. The
routine of setting this register needs to be removed and using promisc
mode to let the packet looped back pass by dsaf mode.

Reported-by: Jun He <hjat2005@...wei.com>
Signed-off-by: Kejian Yan <yankejian@...wei.com>
Reviewed-by: Yisen Zhaung <yisen.zhuang@...wei.com>
Signed-off-by: Salil Mehta <salil.mehta@...wei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c  |  3 ---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 10 ----------
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h |  1 -
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c   |  7 +++++++
 4 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
index e28d960..e0f9cdc 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
@@ -678,9 +678,6 @@ static int hns_ae_config_loopback(struct hnae_handle *handle,
 		ret = -EINVAL;
 	}
 
-	if (!ret)
-		hns_dsaf_set_inner_lb(mac_cb->dsaf_dev, mac_cb->mac_id, en);
-
 	return ret;
 }
 
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index 9283bc6..827d8fb 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -768,16 +768,6 @@ void hns_dsaf_set_promisc_mode(struct dsaf_device *dsaf_dev, u32 en)
 				 DSAF_CFG_MIX_MODE_S, !!en);
 }
 
-void hns_dsaf_set_inner_lb(struct dsaf_device *dsaf_dev, u32 mac_id, u32 en)
-{
-	if (AE_IS_VER1(dsaf_dev->dsaf_ver) ||
-	    dsaf_dev->mac_cb[mac_id]->mac_type == HNAE_PORT_DEBUG)
-		return;
-
-	dsaf_set_dev_bit(dsaf_dev, DSAFV2_SERDES_LBK_0_REG + 4 * mac_id,
-			 DSAFV2_SERDES_LBK_EN_B, !!en);
-}
-
 /**
  * hns_dsaf_tbl_stat_en - tbl
  * @dsaf_id: dsa fabric id
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
index 35df187..c494fc5 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
@@ -466,6 +466,5 @@ void hns_dsaf_get_rx_mac_pause_en(struct dsaf_device *dsaf_dev, int mac_id,
 				  u32 *en);
 int hns_dsaf_set_rx_mac_pause_en(struct dsaf_device *dsaf_dev, int mac_id,
 				 u32 en);
-void hns_dsaf_set_inner_lb(struct dsaf_device *dsaf_dev, u32 mac_id, u32 en);
 
 #endif /* __HNS_DSAF_MAIN_H__ */
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index ab33487..fa91ce3 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -342,6 +342,13 @@ static int __lb_setup(struct net_device *ndev,
 		break;
 	}
 
+	if (!ret) {
+		if (loop == MAC_LOOP_NONE)
+			h->dev->ops->set_promisc_mode(
+				h, ndev->flags & IFF_PROMISC);
+		else
+			h->dev->ops->set_promisc_mode(h, 1);
+	}
 	return ret;
 }
 
-- 
1.9.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ