lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160912204451.GO9449@lukather>
Date:   Mon, 12 Sep 2016 22:44:51 +0200
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Corentin Labbe <clabbe.montjoie@...il.com>
Cc:     robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
        linux@...linux.org.uk, davem@...emloft.net, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH 9/9] ethernet: sun8i-emac: add pm_runtime support

Hi,

On Fri, Sep 09, 2016 at 02:45:17PM +0200, Corentin Labbe wrote:
> This patch add pm_runtime support to sun8i-emac.
> For the moment, only basic support is added, (the device is marked as
> used when net/open)
> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
> ---
>  drivers/net/ethernet/allwinner/sun8i-emac.c | 62 ++++++++++++++++++++++++++++-
>  1 file changed, 60 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/allwinner/sun8i-emac.c b/drivers/net/ethernet/allwinner/sun8i-emac.c
> index 1c4bc80..cce886e 100644
> --- a/drivers/net/ethernet/allwinner/sun8i-emac.c
> +++ b/drivers/net/ethernet/allwinner/sun8i-emac.c
> @@ -9,7 +9,6 @@
>   * - MAC filtering
>   * - Jumbo frame
>   * - features rx-all (NETIF_F_RXALL_BIT)
> - * - PM runtime
>   */
>  #include <linux/bitops.h>
>  #include <linux/clk.h>
> @@ -27,6 +26,7 @@
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/scatterlist.h>
>  #include <linux/skbuff.h>
> @@ -1301,11 +1301,18 @@ static int sun8i_emac_open(struct net_device *ndev)
>  	int err;
>  	u32 v;
>  
> +	err = pm_runtime_get_sync(priv->dev);
> +	if (err) {
> +		pm_runtime_put_noidle(priv->dev);
> +		dev_err(priv->dev, "pm_runtime error: %d\n", err);
> +		return err;
> +	}
> +
>  	err = request_irq(priv->irq, sun8i_emac_dma_interrupt, 0,
>  			  dev_name(priv->dev), ndev);
>  	if (err) {
>  		dev_err(priv->dev, "Cannot request IRQ: %d\n", err);
> -		return err;
> +		goto err_runtime;
>  	}
>  
>  	/* Set interface mode (and configure internal PHY on H3) */
> @@ -1395,6 +1402,8 @@ err_syscon:
>  	sun8i_emac_unset_syscon(ndev);
>  err_irq:
>  	free_irq(priv->irq, ndev);
> +err_runtime:
> +	pm_runtime_put(priv->dev);
>  	return err;
>  }
>  
> @@ -1483,6 +1492,8 @@ static int sun8i_emac_stop(struct net_device *ndev)
>  	dma_free_coherent(priv->dev, priv->nbdesc_tx * sizeof(struct dma_desc),
>  			  priv->dd_tx, priv->dd_tx_phy);
>  
> +	pm_runtime_put(priv->dev);
> +
>  	return 0;
>  }
>  
> @@ -2210,6 +2221,8 @@ static int sun8i_emac_probe(struct platform_device *pdev)
>  		goto probe_err;
>  	}
>  
> +	pm_runtime_enable(priv->dev);
> +
>  	return 0;
>  
>  probe_err:
> @@ -2221,6 +2234,8 @@ static int sun8i_emac_remove(struct platform_device *pdev)
>  {
>  	struct net_device *ndev = platform_get_drvdata(pdev);
>  
> +	pm_runtime_disable(&pdev->dev);
> +
>  	unregister_netdev(ndev);
>  	platform_set_drvdata(pdev, NULL);
>  	free_netdev(ndev);
> @@ -2228,6 +2243,47 @@ static int sun8i_emac_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static int __maybe_unused sun8i_emac_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> +	struct net_device *ndev = platform_get_drvdata(pdev);
> +	struct sun8i_emac_priv *priv = netdev_priv(ndev);
> +
> +	napi_disable(&priv->napi);
> +
> +	if (netif_running(ndev))
> +		netif_device_detach(ndev);
> +
> +	sun8i_emac_stop_tx(ndev);
> +	sun8i_emac_stop_rx(ndev);
> +
> +	sun8i_emac_rx_clean(ndev);
> +	sun8i_emac_tx_clean(ndev);
> +
> +	phy_stop(ndev->phydev);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused sun8i_emac_resume(struct platform_device *pdev)
> +{
> +	struct net_device *ndev = platform_get_drvdata(pdev);
> +	struct sun8i_emac_priv *priv = netdev_priv(ndev);
> +
> +	phy_start(ndev->phydev);
> +
> +	sun8i_emac_start_tx(ndev);
> +	sun8i_emac_start_rx(ndev);
> +
> +	if (netif_running(ndev))
> +		netif_device_attach(ndev);
> +
> +	netif_start_queue(ndev);
> +
> +	napi_enable(&priv->napi);
> +
> +	return 0;
> +}

The main idea behind the runtime PM hooks is that they bring the
device to a working state and shuts it down when it's not needed
anymore.

However, they shouldn't be called when the device is still in used, so
all the mangling with NAPI, the phy and so on is irrelevant here, but
the clocks, resets, for example, are.

>  static const struct of_device_id sun8i_emac_of_match_table[] = {
>  	{ .compatible = "allwinner,sun8i-a83t-emac",
>  	  .data = &emac_variant_a83t },
> @@ -2246,6 +2302,8 @@ static struct platform_driver sun8i_emac_driver = {
>  		.name           = "sun8i-emac",
>  		.of_match_table	= sun8i_emac_of_match_table,
>  	},
> +	.suspend	= sun8i_emac_suspend,
> +	.resume		= sun8i_emac_resume,

These are not the runtime PM hooks. How did you test that?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ