[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1473883781-9571-4-git-send-email-fu.wei@linaro.org>
Date: Thu, 15 Sep 2016 04:09:36 +0800
From: fu.wei@...aro.org
To: rjw@...ysocki.net, lenb@...nel.org, daniel.lezcano@...aro.org,
tglx@...utronix.de, marc.zyngier@....com, mark.rutland@....com,
lorenzo.pieralisi@....com, sudeep.holla@....com,
hanjun.guo@...aro.org
Cc: linux-arm-kernel@...ts.infradead.org, linaro-acpi@...ts.linaro.org,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
rruigrok@...eaurora.org, harba@...eaurora.org, cov@...eaurora.org,
timur@...eaurora.org, graeme.gregory@...aro.org,
al.stone@...aro.org, jcm@...hat.com, wei@...hat.com, arnd@...db.de,
catalin.marinas@....com, will.deacon@....com,
Suravee.Suthikulpanit@....com, leo.duran@....com, wim@...ana.be,
linux@...ck-us.net, linux-watchdog@...r.kernel.org,
tn@...ihalf.com, christoffer.dall@...aro.org, julien.grall@....com,
Fu Wei <fu.wei@...aro.org>
Subject: [PATCH v13 3/8] clocksource/drivers/arm_arch_timer: Improve printk relevant code
From: Fu Wei <fu.wei@...aro.org>
This patch defines pr_fmt(fmt) for all pr_* functions,
then the pr_* doesn't need to add "arch_timer:" everytime.
Also delete some Blank Spaces in arch_timer_banner,
according to the suggestion from checkpatch.pl.
No functional change.
Signed-off-by: Fu Wei <fu.wei@...aro.org>
---
drivers/clocksource/arm_arch_timer.c | 53 ++++++++++++++++++------------------
1 file changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 059f7fb..7d48349 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -32,6 +32,9 @@
#include <clocksource/arm_arch_timer.h>
+#undef pr_fmt
+#define pr_fmt(fmt) "arch_timer: " fmt
+
#define CNTTIDR 0x08
#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
@@ -418,24 +421,24 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
/* Check the timer frequency. */
if (arch_timer_rate == 0)
- pr_warn("Architected timer frequency not available\n");
+ pr_warn("frequency not available\n");
}
static void arch_timer_banner(unsigned type)
{
- pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
- type & ARCH_CP15_TIMER ? "cp15" : "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
- type & ARCH_MEM_TIMER ? "mmio" : "",
- (unsigned long)arch_timer_rate / 1000000,
- (unsigned long)(arch_timer_rate / 10000) % 100,
- type & ARCH_CP15_TIMER ?
- (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
- "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
- type & ARCH_MEM_TIMER ?
- arch_timer_mem_use_virtual ? "virt" : "phys" :
- "");
+ pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+ type & ARCH_CP15_TIMER ? "cp15" : "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
+ type & ARCH_MEM_TIMER ? "mmio" : "",
+ (unsigned long)arch_timer_rate / 1000000,
+ (unsigned long)(arch_timer_rate / 10000) % 100,
+ type & ARCH_CP15_TIMER ?
+ (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
+ "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
+ type & ARCH_MEM_TIMER ?
+ arch_timer_mem_use_virtual ? "virt" : "phys" :
+ "");
}
u32 arch_timer_get_rate(void)
@@ -528,8 +531,7 @@ static void __init arch_counter_register(unsigned type)
static void arch_timer_stop(struct clock_event_device *clk)
{
- pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
- clk->irq, smp_processor_id());
+ pr_debug("disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id());
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
if (arch_timer_has_nonsecure_ppi())
@@ -622,8 +624,7 @@ static int __init arch_timer_register(void)
}
if (err) {
- pr_err("arch_timer: can't register interrupt %d (%d)\n",
- ppi, err);
+ pr_err("can't register interrupt %d (%d)\n", ppi, err);
goto out_free;
}
@@ -676,7 +677,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
if (ret) {
- pr_err("arch_timer: Failed to request mem timer irq\n");
+ pr_err("Failed to request mem timer irq\n");
kfree(t);
}
@@ -754,7 +755,7 @@ static int __init arch_timer_init(void)
}
if (!has_ppi) {
- pr_warn("arch_timer: No interrupt available, giving up\n");
+ pr_warn("No interrupt available, giving up\n");
return -EINVAL;
}
}
@@ -777,7 +778,7 @@ static int __init arch_timer_of_init(struct device_node *np)
int i;
if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+ pr_warn("multiple nodes in dt, skipping\n");
return 0;
}
@@ -812,7 +813,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
arch_timers_present |= ARCH_MEM_TIMER;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
- pr_err("arch_timer: Can't find CNTCTLBase\n");
+ pr_err("Can't find CNTCTLBase\n");
return -ENXIO;
}
@@ -827,7 +828,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
u32 cntacr;
if (of_property_read_u32(frame, "frame-number", &n)) {
- pr_err("arch_timer: Missing frame-number\n");
+ pr_err("Missing frame-number\n");
of_node_put(frame);
goto out;
}
@@ -856,7 +857,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
ret= -ENXIO;
base = arch_counter_base = of_iomap(best_frame, 0);
if (!base) {
- pr_err("arch_timer: Can't map frame's registers\n");
+ pr_err("Can't map frame's registers\n");
goto out;
}
@@ -867,7 +868,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
ret = -EINVAL;
if (!irq) {
- pr_err("arch_timer: Frame missing %s irq",
+ pr_err("Frame missing %s irq",
arch_timer_mem_use_virtual ? "virt" : "phys");
goto out;
}
@@ -909,7 +910,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
struct acpi_table_gtdt *gtdt;
if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: already initialized, skipping\n");
+ pr_warn("already initialized, skipping\n");
return -EINVAL;
}
--
2.7.4
Powered by blists - more mailing lists