| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160916095945.4619-1-eric@anholt.net>
Date: Fri, 16 Sep 2016 10:59:45 +0100
From: Eric Anholt <eric@...olt.net>
To: dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org, Eric Anholt <eric@...olt.net>
Subject: [PATCH] drm/vc4: Enable limited range RGB output on HDMI with CEA modes.
Fixes broken grayscale ramps on many HDMI monitors, where large areas
at the ends of the ramp would all appear as black or white.
Signed-off-by: Eric Anholt <eric@...olt.net>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 31 +++++++++++++++++++++++++++++--
drivers/gpu/drm/vc4/vc4_regs.h | 9 ++++++++-
2 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 9f85a579da74..1e61931846d3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -301,6 +301,7 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *unadjusted_mode,
struct drm_display_mode *mode)
{
+ struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
struct drm_device *dev = encoder->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
bool debug_dump_regs = false;
@@ -316,6 +317,7 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
u32 vertb = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) |
VC4_SET_FIELD(mode->vtotal - mode->vsync_end,
VC4_HDMI_VERTB_VBP));
+ u32 csc_ctl;
if (debug_dump_regs) {
DRM_INFO("HDMI regs before:\n");
@@ -354,9 +356,34 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
(vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
(hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
+ csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
+ VC4_HD_CSC_CTL_ORDER);
+
+ if (vc4_encoder->hdmi_monitor && drm_match_cea_mode(mode) > 1) {
+ /* CEA VICs other than #1 requre limited range RGB
+ * output. Apply a colorspace conversion to squash
+ * 0-255 down to 16-235. The matrix here is:
+ *
+ * [ 0 0 0.8594 16]
+ * [ 0 0.8594 0 16]
+ * [ 0.8594 0 0 16]
+ * [ 0 0 0 1]
+ */
+ csc_ctl |= VC4_HD_CSC_CTL_ENABLE;
+ csc_ctl |= VC4_HD_CSC_CTL_RGB2YCC;
+ csc_ctl |= VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
+ VC4_HD_CSC_CTL_MODE);
+
+ HD_WRITE(VC4_HD_CSC_12_11, (0x000 << 16) | 0x000);
+ HD_WRITE(VC4_HD_CSC_14_13, (0x100 << 16) | 0x6e0);
+ HD_WRITE(VC4_HD_CSC_22_21, (0x6e0 << 16) | 0x000);
+ HD_WRITE(VC4_HD_CSC_24_23, (0x100 << 16) | 0x000);
+ HD_WRITE(VC4_HD_CSC_32_31, (0x000 << 16) | 0x6e0);
+ HD_WRITE(VC4_HD_CSC_34_33, (0x100 << 16) | 0x000);
+ }
+
/* The RGB order applies even when CSC is disabled. */
- HD_WRITE(VC4_HD_CSC_CTL, VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
- VC4_HD_CSC_CTL_ORDER));
+ HD_WRITE(VC4_HD_CSC_CTL, csc_ctl);
HDMI_WRITE(VC4_HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 160942a9180e..9ecd6ff3d493 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -528,10 +528,17 @@
# define VC4_HD_CSC_CTL_MODE_SHIFT 2
# define VC4_HD_CSC_CTL_MODE_RGB_TO_SD_YPRPB 0
# define VC4_HD_CSC_CTL_MODE_RGB_TO_HD_YPRPB 1
-# define VC4_HD_CSC_CTL_MODE_CUSTOM 2
+# define VC4_HD_CSC_CTL_MODE_CUSTOM 3
# define VC4_HD_CSC_CTL_RGB2YCC BIT(1)
# define VC4_HD_CSC_CTL_ENABLE BIT(0)
+#define VC4_HD_CSC_12_11 0x044
+#define VC4_HD_CSC_14_13 0x048
+#define VC4_HD_CSC_22_21 0x04c
+#define VC4_HD_CSC_24_23 0x050
+#define VC4_HD_CSC_32_31 0x054
+#define VC4_HD_CSC_34_33 0x058
+
#define VC4_HD_FRAME_COUNT 0x068
/* HVS display list information. */
--
2.9.3
Powered by blists - more mailing lists