Message-ID: <20160916142121.GG2040@kroah.com>
Date:   Fri, 16 Sep 2016 16:21:21 +0200
From:   Greg KH <gregkh@...uxfoundation.org>
To:     Arnd Bergmann <arnd@...db.de>, linux-kernel@...r.kernel.org
Cc:     Johan Hovold <johan@...oldconsulting.com>,
        Rui Miguel Silva <rmfrfs@...il.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Sandeep Patil <sspatil@...gle.com>,
        Matt Porter <mporter@...nel.crashing.org>,
        John Stultz <john.stultz@...aro.org>,
        Rob Herring <robh@...nel.org>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Alex Elder <elder@...aro.org>, David Lin <dtwlin@...gle.com>,
        Bryan O'Donoghue <pure.logic@...us-software.ie>,
        Vaibhav Agarwal <vaibhav.agarwal@...aro.org>,
        Mark Greer <mgreer@...malcreek.com>
Subject: [patch 27/32] greybus: bridged phy spi driver

This driver implements the Greybus bridged phy spi class protocol.

Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/greybus/spi.c    |   79 ++++++
 drivers/greybus/spilib.c |  565 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/greybus/spilib.h |   24 +
 3 files changed, 668 insertions(+)

--- /dev/null
+++ b/drivers/greybus/spi.c
@@ -0,0 +1,79 @@
+/*
+ * SPI bridge PHY driver.
+ *
+ * Copyright 2014-2016 Google Inc.
+ * Copyright 2014-2016 Linaro Ltd.
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/module.h>
+
+#include "greybus.h"
+#include "gbphy.h"
+#include "spilib.h"
+
+static struct spilib_ops *spilib_ops;
+
+static int gb_spi_probe(struct gbphy_device *gbphy_dev,
+			const struct gbphy_device_id *id)
+{
+	struct gb_connection *connection;
+	int ret;
+
+	connection = gb_connection_create(gbphy_dev->bundle,
+					  le16_to_cpu(gbphy_dev->cport_desc->id),
+					  NULL);
+	if (IS_ERR(connection))
+		return PTR_ERR(connection);
+
+	ret = gb_connection_enable(connection);
+	if (ret)
+		goto exit_connection_destroy;
+
+	ret = gb_spilib_master_init(connection, &gbphy_dev->dev, spilib_ops);
+	if (ret)
+		goto exit_connection_disable;
+
+	gb_gbphy_set_data(gbphy_dev, connection);
+
+	gbphy_runtime_put_autosuspend(gbphy_dev);
+	return 0;
+
+exit_connection_disable:
+	gb_connection_disable(connection);
+exit_connection_destroy:
+	gb_connection_destroy(connection);
+
+	return ret;
+}
+
+static void gb_spi_remove(struct gbphy_device *gbphy_dev)
+{
+	struct gb_connection *connection = gb_gbphy_get_data(gbphy_dev);
+	int ret;
+
+	ret = gbphy_runtime_get_sync(gbphy_dev);
+	if (ret)
+		gbphy_runtime_get_noresume(gbphy_dev);
+
+	gb_spilib_master_exit(connection);
+	gb_connection_disable(connection);
+	gb_connection_destroy(connection);
+}
+
+static const struct gbphy_device_id gb_spi_id_table[] = {
+	{ GBPHY_PROTOCOL(GREYBUS_PROTOCOL_SPI) },
+	{ },
+};
+MODULE_DEVICE_TABLE(gbphy, gb_spi_id_table);
+
+static struct gbphy_driver spi_driver = {
+	.name		= "spi",
+	.probe		= gb_spi_probe,
+	.remove		= gb_spi_remove,
+	.id_table	= gb_spi_id_table,
+};
+
+module_gbphy_driver(spi_driver);
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/drivers/greybus/spilib.c
@@ -0,0 +1,565 @@
+/*
+ * Greybus SPI library
+ *
+ * Copyright 2014-2016 Google Inc.
+ * Copyright 2014-2016 Linaro Ltd.
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+#include "greybus.h"
+#include "spilib.h"
+
+struct gb_spilib {
+	struct gb_connection	*connection;
+	struct device		*parent;
+	struct spi_transfer	*first_xfer;
+	struct spi_transfer	*last_xfer;
+	struct spilib_ops	*ops;
+	u32			rx_xfer_offset;
+	u32			tx_xfer_offset;
+	u32			last_xfer_size;
+	unsigned int		op_timeout;
+	u16			mode;
+	u16			flags;
+	u32			bits_per_word_mask;
+	u8			num_chipselect;
+	u32			min_speed_hz;
+	u32			max_speed_hz;
+};
+
+#define GB_SPI_STATE_MSG_DONE		((void *)0)
+#define GB_SPI_STATE_MSG_IDLE		((void *)1)
+#define GB_SPI_STATE_MSG_RUNNING	((void *)2)
+#define GB_SPI_STATE_OP_READY		((void *)3)
+#define GB_SPI_STATE_OP_DONE		((void *)4)
+#define GB_SPI_STATE_MSG_ERROR		((void *)-1)
+
+#define XFER_TIMEOUT_TOLERANCE		200
+
+static struct spi_master *get_master_from_spi(struct gb_spilib *spi)
+{
+	return gb_connection_get_data(spi->connection);
+}
+
+static int tx_header_fit_operation(u32 tx_size, u32 count, size_t data_max)
+{
+	size_t headers_size;
+
+	data_max -= sizeof(struct gb_spi_transfer_request);
+	headers_size = (count + 1) * sizeof(struct gb_spi_transfer);
+
+	return tx_size + headers_size > data_max ? 0 : 1;
+}
+
+static size_t calc_rx_xfer_size(u32 rx_size, u32 *tx_xfer_size, u32 len,
+				size_t data_max)
+{
+	size_t rx_xfer_size;
+
+	data_max -= sizeof(struct gb_spi_transfer_response);
+
+	if (rx_size + len > data_max)
+		rx_xfer_size = data_max - rx_size;
+	else
+		rx_xfer_size = len;
+
+	/* if this is a write_read, for symmetry read the same as write */
+	if (*tx_xfer_size && rx_xfer_size > *tx_xfer_size)
+		rx_xfer_size = *tx_xfer_size;
+	if (*tx_xfer_size && rx_xfer_size < *tx_xfer_size)
+		*tx_xfer_size = rx_xfer_size;
+
+	return rx_xfer_size;
+}
+
+static size_t calc_tx_xfer_size(u32 tx_size, u32 count, size_t len,
+				size_t data_max)
+{
+	size_t headers_size;
+
+	data_max -= sizeof(struct gb_spi_transfer_request);
+	headers_size = (count + 1) * sizeof(struct gb_spi_transfer);
+
+	if (tx_size + headers_size + len > data_max)
+		return data_max - (tx_size + sizeof(struct gb_spi_transfer));
+
+	return len;
+}
+
+static void clean_xfer_state(struct gb_spilib *spi)
+{
+	spi->first_xfer = NULL;
+	spi->last_xfer = NULL;
+	spi->rx_xfer_offset = 0;
+	spi->tx_xfer_offset = 0;
+	spi->last_xfer_size = 0;
+	spi->op_timeout = 0;
+}
+
+static bool is_last_xfer_done(struct gb_spilib *spi)
+{
+	struct spi_transfer *last_xfer = spi->last_xfer;
+
+	if ((spi->tx_xfer_offset + spi->last_xfer_size == last_xfer->len) ||
+	    (spi->rx_xfer_offset + spi->last_xfer_size == last_xfer->len))
+		return true;
+
+	return false;
+}
+
+static int setup_next_xfer(struct gb_spilib *spi, struct spi_message *msg)
+{
+	struct spi_transfer *last_xfer = spi->last_xfer;
+
+	if (msg->state != GB_SPI_STATE_OP_DONE)
+		return 0;
+
+	/*
+	 * if we transferred all content of the last transfer, reset values and
+	 * check if this was the last transfer in the message
+	 */
+	if (is_last_xfer_done(spi)) {
+		spi->tx_xfer_offset = 0;
+		spi->rx_xfer_offset = 0;
+		spi->op_timeout = 0;
+		if (last_xfer == list_last_entry(&msg->transfers,
+						 struct spi_transfer,
+						 transfer_list))
+			msg->state = GB_SPI_STATE_MSG_DONE;
+		else
+			spi->first_xfer = list_next_entry(last_xfer,
+							  transfer_list);
+		return 0;
+	}
+
+	spi->first_xfer = last_xfer;
+	if (last_xfer->tx_buf)
+		spi->tx_xfer_offset += spi->last_xfer_size;
+
+	if (last_xfer->rx_buf)
+		spi->rx_xfer_offset += spi->last_xfer_size;
+
+	return 0;
+}
+
+static struct spi_transfer *get_next_xfer(struct spi_transfer *xfer,
+					  struct spi_message *msg)
+{
+	if (xfer == list_last_entry(&msg->transfers, struct spi_transfer,
+				    transfer_list))
+		return NULL;
+
+	return list_next_entry(xfer, transfer_list);
+}
+
+/* Routines to transfer data */
+static struct gb_operation *gb_spi_operation_create(struct gb_spilib *spi,
+		struct gb_connection *connection, struct spi_message *msg)
+{
+	struct gb_spi_transfer_request *request;
+	struct spi_device *dev = msg->spi;
+	struct spi_transfer *xfer;
+	struct gb_spi_transfer *gb_xfer;
+	struct gb_operation *operation;
+	u32 tx_size = 0, rx_size = 0, count = 0, xfer_len = 0, request_size;
+	u32 tx_xfer_size = 0, rx_xfer_size = 0, len;
+	u32 total_len = 0;
+	unsigned int xfer_timeout;
+	size_t data_max;
+	void *tx_data;
+
+	data_max = gb_operation_get_payload_size_max(connection);
+	xfer = spi->first_xfer;
+
+	/* Find number of transfers queued and tx/rx length in the message */
+
+	while (msg->state != GB_SPI_STATE_OP_READY) {
+		msg->state = GB_SPI_STATE_MSG_RUNNING;
+		spi->last_xfer = xfer;
+
+		if (!xfer->tx_buf && !xfer->rx_buf) {
+			dev_err(spi->parent,
+				"bufferless transfer, length %u\n", xfer->len);
+			msg->state = GB_SPI_STATE_MSG_ERROR;
+			return NULL;
+		}
+
+		tx_xfer_size = 0;
+		rx_xfer_size = 0;
+
+		if (xfer->tx_buf) {
+			len = xfer->len - spi->tx_xfer_offset;
+			if (!tx_header_fit_operation(tx_size, count, data_max))
+				break;
+			tx_xfer_size = calc_tx_xfer_size(tx_size, count,
+							 len, data_max);
+			spi->last_xfer_size = tx_xfer_size;
+		}
+
+		if (xfer->rx_buf) {
+			len = xfer->len - spi->rx_xfer_offset;
+			rx_xfer_size = calc_rx_xfer_size(rx_size, &tx_xfer_size,
+							 len, data_max);
+			spi->last_xfer_size = rx_xfer_size;
+		}
+
+		tx_size += tx_xfer_size;
+		rx_size += rx_xfer_size;
+
+		total_len += spi->last_xfer_size;
+		count++;
+
+		xfer = get_next_xfer(xfer, msg);
+		if (!xfer || total_len >= data_max)
+			msg->state = GB_SPI_STATE_OP_READY;
+	}
+
+	/*
+	 * In addition to space for all message descriptors we need
+	 * to have enough to hold all tx data.
+	 */
+	request_size = sizeof(*request);
+	request_size += count * sizeof(*gb_xfer);
+	request_size += tx_size;
+
+	/* Response consists only of incoming data */
+	operation = gb_operation_create(connection, GB_SPI_TYPE_TRANSFER,
+					request_size, rx_size, GFP_KERNEL);
+	if (!operation)
+		return NULL;
+
+	request = operation->request->payload;
+	request->count = cpu_to_le16(count);
+	request->mode = dev->mode;
+	request->chip_select = dev->chip_select;
+
+	gb_xfer = &request->transfers[0];
+	tx_data = gb_xfer + count;	/* place tx data after last gb_xfer */
+
+	/* Fill in the transfers array */
+	xfer = spi->first_xfer;
+	while (msg->state != GB_SPI_STATE_OP_DONE) {
+		if (xfer == spi->last_xfer)
+			xfer_len = spi->last_xfer_size;
+		else
+			xfer_len = xfer->len;
+
+		/* make sure we do not timeout in a slow transfer */
+		xfer_timeout = xfer_len * 8 * MSEC_PER_SEC / xfer->speed_hz;
+		xfer_timeout += GB_OPERATION_TIMEOUT_DEFAULT;
+
+		if (xfer_timeout > spi->op_timeout)
+			spi->op_timeout = xfer_timeout;
+
+		gb_xfer->speed_hz = cpu_to_le32(xfer->speed_hz);
+		gb_xfer->len = cpu_to_le32(xfer_len);
+		gb_xfer->delay_usecs = cpu_to_le16(xfer->delay_usecs);
+		gb_xfer->cs_change = xfer->cs_change;
+		gb_xfer->bits_per_word = xfer->bits_per_word;
+
+		/* Copy tx data */
+		if (xfer->tx_buf) {
+			gb_xfer->xfer_flags |= GB_SPI_XFER_WRITE;
+			memcpy(tx_data, xfer->tx_buf + spi->tx_xfer_offset,
+			       xfer_len);
+			tx_data += xfer_len;
+		}
+
+		if (xfer->rx_buf)
+			gb_xfer->xfer_flags |= GB_SPI_XFER_READ;
+
+		if (xfer == spi->last_xfer) {
+			if (!is_last_xfer_done(spi))
+				gb_xfer->xfer_flags |= GB_SPI_XFER_INPROGRESS;
+			msg->state = GB_SPI_STATE_OP_DONE;
+			continue;
+		}
+
+		gb_xfer++;
+		xfer = get_next_xfer(xfer, msg);
+	}
+
+	msg->actual_length += total_len;
+
+	return operation;
+}
+
+static void gb_spi_decode_response(struct gb_spilib *spi,
+				   struct spi_message *msg,
+				   struct gb_spi_transfer_response *response)
+{
+	struct spi_transfer *xfer = spi->first_xfer;
+	void *rx_data = response->data;
+	u32 xfer_len;
+
+	while (xfer) {
+		/* Copy rx data */
+		if (xfer->rx_buf) {
+			if (xfer == spi->first_xfer)
+				xfer_len = xfer->len - spi->rx_xfer_offset;
+			else if (xfer == spi->last_xfer)
+				xfer_len = spi->last_xfer_size;
+			else
+				xfer_len = xfer->len;
+
+			memcpy(xfer->rx_buf + spi->rx_xfer_offset, rx_data,
+			       xfer_len);
+			rx_data += xfer_len;
+		}
+
+		if (xfer == spi->last_xfer)
+			break;
+
+		xfer = list_next_entry(xfer, transfer_list);
+	}
+}
+
+static int gb_spi_transfer_one_message(struct spi_master *master,
+				       struct spi_message *msg)
+{
+	struct gb_spilib *spi = spi_master_get_devdata(master);
+	struct gb_connection *connection = spi->connection;
+	struct gb_spi_transfer_response *response;
+	struct gb_operation *operation;
+	int ret = 0;
+
+	spi->first_xfer = list_first_entry_or_null(&msg->transfers,
+						   struct spi_transfer,
+						   transfer_list);
+	if (!spi->first_xfer) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	msg->state = GB_SPI_STATE_MSG_IDLE;
+
+	while (msg->state != GB_SPI_STATE_MSG_DONE &&
+	       msg->state != GB_SPI_STATE_MSG_ERROR) {
+		operation = gb_spi_operation_create(spi, connection, msg);
+		if (!operation) {
+			msg->state = GB_SPI_STATE_MSG_ERROR;
+			ret = -EINVAL;
+			continue;
+		}
+
+		ret = gb_operation_request_send_sync_timeout(operation,
+							     spi->op_timeout);
+		if (!ret) {
+			response = operation->response->payload;
+			if (response)
+				gb_spi_decode_response(spi, msg, response);
+		} else {
+			dev_err(spi->parent,
+				"transfer operation failed: %d\n", ret);
+			msg->state = GB_SPI_STATE_MSG_ERROR;
+		}
+
+		gb_operation_put(operation);
+		setup_next_xfer(spi, msg);
+	}
+
+out:
+	msg->status = ret;
+	clean_xfer_state(spi);
+	spi_finalize_current_message(master);
+
+	return ret;
+}
+
+static int gb_spi_prepare_transfer_hardware(struct spi_master *master)
+{
+	struct gb_spilib *spi = spi_master_get_devdata(master);
+
+	return spi->ops->prepare_transfer_hardware(spi->parent);
+}
+
+static int gb_spi_unprepare_transfer_hardware(struct spi_master *master)
+{
+	struct gb_spilib *spi = spi_master_get_devdata(master);
+
+	spi->ops->unprepare_transfer_hardware(spi->parent);
+
+	return 0;
+}
+
+static int gb_spi_setup(struct spi_device *spi)
+{
+	/* Nothing to do for now */
+	return 0;
+}
+
+static void gb_spi_cleanup(struct spi_device *spi)
+{
+	/* Nothing to do for now */
+}
+
+/* Routines to get controller information */
+
+/*
+ * Map Greybus spi mode bits/flags/bpw into Linux ones.
+ * All bits are same for now and so these macro's return same values.
+ */
+#define gb_spi_mode_map(mode) mode
+#define gb_spi_flags_map(flags) flags
+
+static int gb_spi_get_master_config(struct gb_spilib *spi)
+{
+	struct gb_spi_master_config_response response;
+	u16 mode, flags;
+	int ret;
+
+	ret = gb_operation_sync(spi->connection, GB_SPI_TYPE_MASTER_CONFIG,
+				NULL, 0, &response, sizeof(response));
+	if (ret < 0)
+		return ret;
+
+	mode = le16_to_cpu(response.mode);
+	spi->mode = gb_spi_mode_map(mode);
+
+	flags = le16_to_cpu(response.flags);
+	spi->flags = gb_spi_flags_map(flags);
+
+	spi->bits_per_word_mask = le32_to_cpu(response.bits_per_word_mask);
+	spi->num_chipselect = response.num_chipselect;
+
+	spi->min_speed_hz = le32_to_cpu(response.min_speed_hz);
+	spi->max_speed_hz = le32_to_cpu(response.max_speed_hz);
+
+	return 0;
+}
+
+static int gb_spi_setup_device(struct gb_spilib *spi, u8 cs)
+{
+	struct spi_master *master = get_master_from_spi(spi);
+	struct gb_spi_device_config_request request;
+	struct gb_spi_device_config_response response;
+	struct spi_board_info spi_board = { {0} };
+	struct spi_device *spidev;
+	int ret;
+	u8 dev_type;
+
+	request.chip_select = cs;
+
+	ret = gb_operation_sync(spi->connection, GB_SPI_TYPE_DEVICE_CONFIG,
+				&request, sizeof(request),
+				&response, sizeof(response));
+	if (ret < 0)
+		return ret;
+
+	dev_type = response.device_type;
+
+	if (dev_type == GB_SPI_SPI_DEV)
+		strlcpy(spi_board.modalias, "spidev",
+			sizeof(spi_board.modalias));
+	else if (dev_type == GB_SPI_SPI_NOR)
+		strlcpy(spi_board.modalias, "spi-nor",
+			sizeof(spi_board.modalias));
+	else if (dev_type == GB_SPI_SPI_MODALIAS)
+		memcpy(spi_board.modalias, response.name,
+		       sizeof(spi_board.modalias));
+	else
+		return -EINVAL;
+
+	spi_board.mode		= le16_to_cpu(response.mode);
+	spi_board.bus_num	= master->bus_num;
+	spi_board.chip_select	= cs;
+	spi_board.max_speed_hz	= le32_to_cpu(response.max_speed_hz);
+
+	spidev = spi_new_device(master, &spi_board);
+	if (!spidev)
+		return -EINVAL;
+
+	return 0;
+}
+
+int gb_spilib_master_init(struct gb_connection *connection, struct device *dev,
+			  struct spilib_ops *ops)
+{
+	struct gb_spilib *spi;
+	struct spi_master *master;
+	int ret;
+	u8 i;
+
+	/* Allocate master with space for data */
+	master = spi_alloc_master(dev, sizeof(*spi));
+	if (!master) {
+		dev_err(dev, "cannot alloc SPI master\n");
+		return -ENOMEM;
+	}
+
+	spi = spi_master_get_devdata(master);
+	spi->connection = connection;
+	gb_connection_set_data(connection, master);
+	spi->parent = dev;
+	spi->ops = ops;
+
+	/* get master configuration */
+	ret = gb_spi_get_master_config(spi);
+	if (ret)
+		goto exit_spi_put;
+
+	master->bus_num = -1; /* Allow spi-core to allocate it dynamically */
+	master->num_chipselect = spi->num_chipselect;
+	master->mode_bits = spi->mode;
+	master->flags = spi->flags;
+	master->bits_per_word_mask = spi->bits_per_word_mask;
+
+	/* Attach methods */
+	master->cleanup = gb_spi_cleanup;
+	master->setup = gb_spi_setup;
+	master->transfer_one_message = gb_spi_transfer_one_message;
+
+	if (ops && ops->prepare_transfer_hardware) {
+		master->prepare_transfer_hardware =
+			gb_spi_prepare_transfer_hardware;
+	}
+
+	if (ops && ops->unprepare_transfer_hardware) {
+		master->unprepare_transfer_hardware =
+			gb_spi_unprepare_transfer_hardware;
+	}
+
+	master->auto_runtime_pm = true;
+
+	ret = spi_register_master(master);
+	if (ret < 0)
+		goto exit_spi_put;
+
+	/* now, fetch the devices configuration */
+	for (i = 0; i < spi->num_chipselect; i++) {
+		ret = gb_spi_setup_device(spi, i);
+		if (ret < 0) {
+			dev_err(dev, "failed to allocate spi device %d: %d\n",
+				i, ret);
+			goto exit_spi_unregister;
+		}
+	}
+
+	return 0;
+
+exit_spi_unregister:
+	spi_unregister_master(master);
+exit_spi_put:
+	spi_master_put(master);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gb_spilib_master_init);
+
+void gb_spilib_master_exit(struct gb_connection *connection)
+{
+	struct spi_master *master = gb_connection_get_data(connection);
+
+	spi_unregister_master(master);
+	spi_master_put(master);
+}
+EXPORT_SYMBOL_GPL(gb_spilib_master_exit);
+
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/drivers/greybus/spilib.h
@@ -0,0 +1,24 @@
+/*
+ * Greybus SPI library header
+ *
+ * copyright 2016 google inc.
+ * copyright 2016 linaro ltd.
+ *
+ * released under the gplv2 only.
+ */
+
+#ifndef __SPILIB_H
+#define __SPILIB_H
+
+struct device;
+struct gb_connection;
+
+struct spilib_ops {
+	int (*prepare_transfer_hardware)(struct device *dev);
+	void (*unprepare_transfer_hardware)(struct device *dev);
+};
+
+int gb_spilib_master_init(struct gb_connection *connection, struct device *dev, struct spilib_ops *ops);
+void gb_spilib_master_exit(struct gb_connection *connection);
+
+#endif /* __SPILIB_H */

Powered by blists - more mailing lists