[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1474047681-6821-2-git-send-email-srinivas.kandagatla@linaro.org>
Date: Fri, 16 Sep 2016 18:41:20 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Andy Gross <andy.gross@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linus.walleij@...aro.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH 1/2] pinctrl: pm8994: add pad voltage regulator defines
This patch adds defines for internal voltage regulators used
to switch voltage levels on gpio/mpp pads.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 4 ++++
include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 6 ++++++
2 files changed, 10 insertions(+)
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
index aafa76c..d33f17c 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -89,6 +89,10 @@
#define PMA8084_GPIO_S4 2
#define PMA8084_GPIO_L6 3
+#define PM8994_GPIO_VPH 0
+#define PM8994_GPIO_S4 2
+#define PM8994_GPIO_L12 3
+
/* To be used with "function" */
#define PMIC_GPIO_FUNC_NORMAL "normal"
#define PMIC_GPIO_FUNC_PAIRED "paired"
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
index a15c170..2e360d8f 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
@@ -65,6 +65,12 @@
#define PMA8084_MPP_S4 2
#define PMA8084_MPP_L6 3
+#define PM8994_MPP_VPH 0
+/* Only supported for MPP_05-MPP_08 */
+#define PM8994_MPP_L19 1
+#define PM8994_MPP_S4 2
+#define PM8994_MPP_L12 3
+
/*
* Analog Input - Set the source for analog input.
* To be used with "qcom,amux-route" property
--
2.7.4
Powered by blists - more mailing lists