| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1474054971-16831-10-git-send-email-krzk@kernel.org>
Date: Fri, 16 Sep 2016 21:42:50 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Javier Martinez Canillas <javier@....samsung.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Alban Browaeys <alban.browaeys@...il.com>,
Marc Zyngier <marc.zyngier@....com>
Subject: [PATCH 09/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@...sung.com>
Reported-by: Geert Uytterhoeven <geert@...ux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@...il.com>
Cc: Marc Zyngier <marc.zyngier@....com>
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index a86a4898d077..b0848a3d3d88 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -181,10 +182,18 @@
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 122 0>, <0 123 0>,
- <0 124 0>, <0 125 0>, <0 126 0>,
- <0 127 0>, <0 128 0>, <0 129 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci@...00000 {
@@ -210,25 +219,25 @@
pinctrl_0: pinctrl@...00000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@...90000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
- interrupts = <0 157 0>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@...B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
- interrupts = <0 243 0>;
+ interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@...50000 {
@@ -239,7 +248,7 @@
uart0: serial@...00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 146 0>;
+ interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -248,7 +257,7 @@
uart1: serial@...10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 147 0>;
+ interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -257,7 +266,7 @@
uart2: serial@...20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 148 0>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -266,7 +275,7 @@
uart3: serial@...60000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
- interrupts = <0 145 0>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -275,7 +284,7 @@
mmc_0: mmc@...40000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
- interrupts = <0 156 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +296,7 @@
mmc_1: mmc@...50000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
- interrupts = <0 158 0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +308,7 @@
mmc_2: mmc@...60000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
- interrupts = <0 159 0>;
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
--
2.7.4
Powered by blists - more mailing lists