lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1474181161-1975-1-git-send-email-meng.yi@nxp.com>
Date:   Sun, 18 Sep 2016 14:46:01 +0800
From:   Meng Yi <meng.yi@....com>
To:     <daniel.lezcano@...aro.org>, <tglx@...utronix.de>,
        <alexander.stein@...tec-electronic.com>
CC:     <linux-kernel@...r.kernel.org>, Meng Yi <meng.yi@....com>
Subject: [PATCH v2] clocksource/fsl: Fix errata A-007728 for flextimer

If the FTM counter reaches the FTM_MOD value between the reading of the
TOF bit and the writing of 0 to the TOF bit, the process of clearing the
TOF bit does not work as expected when FTMx_CONF[NUMTOF] != 0 and the
current TOF count is less than FTMx_CONF[NUMTOF]. If the above condition
is met, the TOF bit remains set. If the TOF interrupt is enabled
(FTMx_SC[TOIE] = 1), the TOF interrupt also remains asserted.

Above is the errata discription

The workaround is clearing TOF bit until it is cleaned(FTM counter doesn't
always reache the FTM_MOD anyway),which may cost some cycles.

Signed-off-by: Meng Yi <meng.yi@....com>
---
Change in V2:
-add timeout into IRQ context(suggested by Alexander)
---
 drivers/clocksource/fsl_ftm_timer.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c
index 738515b..86f9186 100644
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -83,11 +83,13 @@ static inline void ftm_counter_disable(void __iomem *base)
 
 static inline void ftm_irq_acknowledge(void __iomem *base)
 {
-	u32 val;
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
 
-	val = ftm_readl(base + FTM_SC);
-	val &= ~FTM_SC_TOF;
-	ftm_writel(val, base + FTM_SC);
+	/*read and clean the FTM_SC_TOF bit until its cleared*/
+	while ((FTM_SC_TOF & ftm_readl(base + FTM_SC)) &&
+		time_before(jiffies, timeout))
+		ftm_writel(ftm_readl(base + FTM_SC) & (~FTM_SC_TOF),
+			   base + FTM_SC);
 }
 
 static inline void ftm_irq_enable(void __iomem *base)
-- 
2.1.0.27.g96db324

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ