linux-kernel - [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160919161314.25858-1-eric@anholt.net>
Date:   Mon, 19 Sep 2016 17:13:12 +0100
From:   Eric Anholt <eric@...olt.net>
To:     Linus Walleij <linus.walleij@...aro.org>
Cc:     linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Stephen Warren <swarren@...dotorg.org>,
        Lee Jones <lee@...nel.org>,
        bcm-kernel-feedback-list@...adcom.com,
        Alexandre Courbot <gnurou@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Gerd Hoffmann <kraxel@...hat.com>,
        Eric Anholt <eric@...olt.net>
Subject: [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.

The RPi firmware exposes all of the board's GPIO lines through
property calls.  Linux chooses to control most lines directly through
the pinctrl driver, but for the FXL6408 GPIO expander on the Pi3, we
need to access them through the firmware.

Signed-off-by: Eric Anholt <eric@...olt.net>
---
 .../bindings/gpio/gpio-raspberrypi-firmware.txt    | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-raspberrypi-firmware.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-raspberrypi-firmware.txt b/Documentation/devicetree/bindings/gpio/gpio-raspberrypi-firmware.txt
new file mode 100644
index 000000000000..2b635c23a6f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-raspberrypi-firmware.txt
@@ -0,0 +1,22 @@
+Raspberry Pi power domain driver
+
+Required properties:
+
+- compatible:		Should be "raspberrypi,firmware-gpio"
+- gpio-controller:	Marks the device node as a gpio controller
+- #gpio-cells:		Should be <2> for GPIO number and flags
+- ngpios:		Number of GPIO lines to control.  See gpio.txt
+- firmware:		Reference to the RPi firmware device node
+- raspberrypi,firmware-gpio-offset:
+			Number the firmware uses for the first GPIO line
+			  controlled by this driver
+
+Example:
+fxl6408: firmware-gpio-128 {
+	compatible = "raspberrypi,firmware-gpio";
+	gpio-controller;
+	#gpio-cells = <2>;
+	firmware = <&firmware>;
+	ngpios = <8>;
+	raspberrypi,firmware-gpio-offset = <128>;
+};
-- 
2.9.3