linux-kernel - [PATCH v2 04/14] MIPS: Malta: Allow PCI devices DMA to lower 2GB physical

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160919212132.28893-5-paul.burton@imgtec.com>
Date:   Mon, 19 Sep 2016 22:21:21 +0100
From:   Paul Burton <paul.burton@...tec.com>
To:     <linux-mips@...ux-mips.org>, Ralf Baechle <ralf@...ux-mips.org>
CC:     Paul Burton <paul.burton@...tec.com>,
        Alexander Sverdlin <alexander.sverdlin@...ia.com>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 04/14] MIPS: Malta: Allow PCI devices DMA to lower 2GB physical

Set the PCI_BAR0 register in all configurations such that PCI devices
can perform DMA to all of the bottom 2GB of the physical address space.
This is imperfect if we make use of the legacy Malta memory map, but it
is an improvement on the inconsistent values setup before.

Signed-off-by: Paul Burton <paul.burton@...tec.com>
---

Changes in v2: None

 arch/mips/mti-malta/malta-init.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index dc2c521..0f3b881 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/pci_regs.h>
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
@@ -242,23 +243,19 @@ mips_pci_controller:
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
 #endif
-#ifndef CONFIG_EVA
-		/* Fix up target memory mapping.  */
-		MSC_READ(MSC01_PCI_BAR0, mask);
-		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
-#else
+
 		/*
 		 * Setup the Malta max (2GB) memory for PCI DMA in host bridge
-		 * in transparent addressing mode, starting from 0x80000000.
+		 * in transparent addressing mode.
 		 */
-		mask = PHYS_OFFSET | (1<<3);
+		mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH;
 		MSC_WRITE(MSC01_PCI_BAR0, mask);
-
-		mask = PHYS_OFFSET;
 		MSC_WRITE(MSC01_PCI_HEAD4, mask);
+
+		mask &= MSC01_PCI_BAR0_SIZE_MSK;
 		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask);
 		MSC_WRITE(MSC01_PCI_P2SCMAPL, mask);
-#endif
+
 		/* Don't handle target retries indefinitely.  */
 		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
 		    MSC01_PCI_CFG_MAXRTRY_MSK)
-- 
2.9.3