[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPybu_0S0juNTNO1eQUbxyvcDR8o8W-69+oK5G_i42Z8CHS+FA@mail.gmail.com>
Date: Wed, 21 Sep 2016 09:57:23 +0200
From: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To: Boris Brezillon <boris.brezillon@...e-electrons.com>
Cc: Cyrille Pitchen <cyrille.pitchen@...el.com>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Javier Martinez Canillas <javier@....samsung.com>,
Stephen Warren <swarren@...dia.com>,
Jagan Teki <jteki@...nedev.com>, Vignesh R <vigneshr@...com>,
Marek Vasut <marex@...x.de>,
Ezequiel García <ezequiel@...guardiasur.com.ar>,
Rafał Miłecki <zajec5@...il.com>,
Furquan Shaikh <furquan@...gle.com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] mtd: spi-nor: Add support for S3AN spi-nor devices
Hi Boris
On Wed, Sep 21, 2016 at 9:07 AM, Boris Brezillon
<boris.brezillon@...e-electrons.com> wrote:
> Hi Ricardo,
>
> Please try to pass the version in your subject prefix (pass
> --subject-prefix="PATCH vX" to git format-patch).
>
Sorry about that.
> On Tue, 20 Sep 2016 17:45:51 +0200
> Ricardo Ribalda Delgado <ricardo.ribalda@...il.com> wrote:
>> /*
>> + * This code converts an address to the Default Address Mode, that has non
>> + * power of two page sizes. We must support this mode because it is the default
>> + * mode supported by Xilinx tools, it can access the whole flash area and
>> + * changing over to the Power-of-two mode is irreversible and corrupts the
>> + * original data.
>> + */
>> +static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
>> +{
>> + unsigned int offset;
>> +
>> + offset = (nor->page_size == 264) ? (addr % 264) : (addr % 528);
>
> Can you send a new version with
>
> offset = addr % nor->page_size;
>
> to see if kbuild test robot still complains.
>
This code:
static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, loff_t addr)
{
unsigned int offset;
offset = addr % nor->page_size;
return ((addr - offset) << 1) | offset;
}
When built like:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross
-O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=blackfin
Produces this error:
drivers/built-in.o: In function `spi_nor_write':
drivers/mtd/spi-nor/spi-nor.c:(.text+0xfeb8): undefined reference to `__moddi3'
drivers/built-in.o: In function `spi_nor_read':
drivers/mtd/spi-nor/spi-nor.c:(.text+0x10248): undefined reference to `__moddi3'
drivers/built-in.o: In function `spi_nor_erase':
drivers/mtd/spi-nor/spi-nor.c:(.text+0x1034e): undefined reference to `__moddi3'
Makefile:956: recipe for target 'vmlinux' failed
But I think I found the right combination:
static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, loff_t addr)
{
unsigned int offset = addr;
offset %= nor->page_size;
return ((addr - offset) << 1) | offset;
}
This one works fine on x86 and blackfin
Sending v7
Thanks!
--
Ricardo Ribalda
Powered by blists - more mailing lists