[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1474422233-29355-2-git-send-email-shawn.lin@rock-chips.com>
Date: Wed, 21 Sep 2016 09:43:49 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
Cc: Adrian Hunter <adrian.hunter@...el.com>,
Jaehoon Chung <jh80.chung@...sung.com>,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
Ziyuan Xu <xzy.xu@...k-chips.com>,
Shawn Lin <shawn.lin@...k-chips.com>
Subject: [PATCH 1/5] mmc: core: don't try to switch block size for dual rate mode
From: Ziyuan Xu <xzy.xu@...k-chips.com>
Per spec, block size should always be 512 bytes for dual rate mode,
so any attempts to switch the block size under dual rate mode should
be neglected.
Signed-off-by: Ziyuan Xu <xzy.xu@...k-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
---
drivers/mmc/core/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f0ed0af..2553d90 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2576,7 +2576,8 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
{
struct mmc_command cmd = {0};
- if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
+ if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) ||
+ mmc_card_hs400(card) || mmc_card_hs400es(card))
return 0;
cmd.opcode = MMC_SET_BLOCKLEN;
--
2.3.7
Powered by blists - more mailing lists