linux-kernel - Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160922.082247.198689057396545219.davem@davemloft.net>
Date:   Thu, 22 Sep 2016 08:22:47 -0400 (EDT)
From:   David Miller <davem@...emloft.net>
To:     sean.wang@...iatek.com
Cc:     john@...ozen.org, nbd@...nwrt.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
        andrew@...n.ch, f.fainelli@...il.com, keyhaede@...il.com,
        objelf@...il.com
Subject: Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through
 TRGMII hardware module

From: <sean.wang@...iatek.com>
Date: Thu, 22 Sep 2016 10:33:53 +0800

> By default, GMAC0 is connected to built-in switch called
> MT7530 through the proprietary interface called Turbo RGMII
> (TRGMII). TRGMII also supports well for RGMII as generic external
> PHY uses but requires some slight changes to the setup of TRGMII 
> and doesn't have well support on current driver.
> 
> So this patchset
> 1) provides the slight changes of the setup for RGMII can work
>    through TRGMII
> 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII 
>    about phy-mode on device tree to make GMAC0 distinguish which
>    mode it runs
> 3) changes dynamically source clock, TX/RX delay and interface
>    mode on TRGMII for adapting various link
> 
> Changes since v1:
> - fixed the style of comment which doesn't have a space at 
>    the beginning and end of comment lines
> - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII 
>    into linux/phy.h
> - enhance the Documentation about device tree binding for trgmii
>   which is applicable only for GMAC0 which uses fixed-link

Series applied.