| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <15d859a9e279da4c9624e195ab958338339ac550.1474621107.git.moinejf@free.fr>
Date: Thu, 22 Sep 2016 19:06:23 +0200
From: Jean-Francois Moine <moinejf@...e.fr>
To: Chen-Yu Tsai <wens@...e.org>, Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: [PATCH v3 1/4] regulator: axp20x: move device independant parts to
new files
The axp20x driver contains device specific and device independant parts.
This patch moves the independant parts to new .c/.h files.
Signed-off-by: Jean-Francois Moine <moinejf@...e.fr>
---
drivers/regulator/Makefile | 2 +-
drivers/regulator/axp-regulator.c | 308 ++++++++++++++++++++++++++
drivers/regulator/axp-regulator.h | 127 +++++++++++
drivers/regulator/axp20x-regulator.c | 415 +++--------------------------------
4 files changed, 464 insertions(+), 388 deletions(-)
create mode 100644 drivers/regulator/axp-regulator.c
create mode 100644 drivers/regulator/axp-regulator.h
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2142a5d..225a026 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
-obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
+obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o axp-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
diff --git a/drivers/regulator/axp-regulator.c b/drivers/regulator/axp-regulator.c
new file mode 100644
index 0000000..0d7adb6
--- /dev/null
+++ b/drivers/regulator/axp-regulator.c
@@ -0,0 +1,308 @@
+/*
+ * AXP regulators driver
+ *
+ * Copyright (C) 2016 Jean-Francois Moine <moinejf@...e.fr>
+ * Copyright (C) 2013 Carlo Caione <carlo@...one.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/sunxi-rsb.h>
+
+#include "axp-regulator.h"
+
+#define AXP20X_WORKMODE_DCDC2_MASK BIT(2)
+#define AXP20X_WORKMODE_DCDC3_MASK BIT(1)
+#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT(x)
+
+#define AXP20X_FREQ_DCDC_MASK 0x0f
+
+#define AXP22X_MISC_N_VBUSEN_FUNC BIT(4)
+
+const struct regulator_ops axp_ops_fixed = {
+ .list_voltage = regulator_list_voltage_linear,
+};
+EXPORT_SYMBOL_GPL(axp_ops_fixed);
+
+const struct regulator_ops axp_ops_range = {
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+EXPORT_SYMBOL_GPL(axp_ops_range);
+
+const struct regulator_ops axp_ops = {
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+EXPORT_SYMBOL_GPL(axp_ops);
+
+const struct regulator_ops axp_ops_sw = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+EXPORT_SYMBOL_GPL(axp_ops_sw);
+
+static const struct regulator_desc axp22x_drivevbus_regulator = {
+ .name = "drivevbus",
+ .supply_name = "drivevbus",
+ .of_match = of_match_ptr("drivevbus"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = AXP20X_VBUS_IPSOUT_MGMT,
+ .enable_mask = BIT(2),
+ .ops = &axp_ops_sw,
+};
+
+static int axp_set_dcdc_freq(struct device *dev,
+ u32 dcdcfreq)
+{
+ struct axp20x_dev *axp20x = dev_get_drvdata(dev);
+ unsigned int reg = AXP20X_DCDC_FREQ;
+ u32 min, max, def, step;
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ min = 750;
+ max = 1875;
+ def = 1500;
+ step = 75;
+ break;
+ case AXP806_ID:
+ /*
+ * AXP806 DCDC work frequency setting has the same range and
+ * step as AXP22X, but at a different register.
+ * Fall through to the check below.
+ * (See include/linux/mfd/axp20x.h)
+ */
+ reg = AXP806_DCDC_FREQ_CTRL;
+ case AXP221_ID:
+ case AXP223_ID:
+ case AXP809_ID:
+ min = 1800;
+ max = 4050;
+ def = 3000;
+ step = 150;
+ break;
+ default:
+ dev_err(dev,
+ "Setting DCDC frequency for unsupported AXP variant\n");
+ return -EINVAL;
+ }
+
+ if (dcdcfreq == 0)
+ dcdcfreq = def;
+
+ if (dcdcfreq < min) {
+ dcdcfreq = min;
+ dev_warn(dev, "DCDC frequency too low. Set to %ukHz\n",
+ min);
+ }
+
+ if (dcdcfreq > max) {
+ dcdcfreq = max;
+ dev_warn(dev, "DCDC frequency too high. Set to %ukHz\n",
+ max);
+ }
+
+ dcdcfreq = (dcdcfreq - min) / step;
+
+ return regmap_update_bits(axp20x->regmap, reg,
+ AXP20X_FREQ_DCDC_MASK, dcdcfreq);
+}
+
+static int axp_regulator_parse_dt(struct device *dev)
+{
+ struct device_node *np, *regulators;
+ int ret;
+ u32 dcdcfreq = 0;
+
+ np = of_node_get(dev->of_node);
+ if (!np)
+ return 0;
+
+ regulators = of_get_child_by_name(np, "regulators");
+ if (!regulators) {
+ dev_warn(dev, "regulators node not found\n");
+ } else {
+ of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
+ ret = axp_set_dcdc_freq(dev, dcdcfreq);
+ if (ret < 0) {
+ dev_err(dev, "Error setting dcdc frequency: %d\n", ret);
+ return ret;
+ }
+
+ of_node_put(regulators);
+ }
+
+ return 0;
+}
+
+static int axp_set_dcdc_workmode(struct regulator_dev *rdev,
+ int id, u32 workmode)
+{
+ struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
+ unsigned int reg = AXP20X_DCDC_MODE;
+ unsigned int mask;
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
+ return -EINVAL;
+
+ mask = AXP20X_WORKMODE_DCDC2_MASK;
+ if (id == AXP20X_DCDC3)
+ mask = AXP20X_WORKMODE_DCDC3_MASK;
+
+ workmode <<= ffs(mask) - 1;
+ break;
+
+ case AXP806_ID:
+ reg = AXP806_DCDC_MODE_CTRL2;
+ /*
+ * AXP806 DCDC regulator IDs have the same range as AXP22X.
+ * Fall through to the check below.
+ * (See include/linux/mfd/axp20x.h)
+ */
+ case AXP221_ID:
+ case AXP223_ID:
+ case AXP809_ID:
+ if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
+ return -EINVAL;
+
+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
+ workmode <<= id - AXP22X_DCDC1;
+ break;
+
+ default:
+ /* should not happen */
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(rdev->regmap, reg, mask, workmode);
+}
+
+/* create the regulators */
+int axp_regulator_create(struct device *dev,
+ const struct axp_cfg *axp_cfg)
+{
+ struct regulator_dev *rdev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(dev);
+ struct regulator_config config = {
+ .dev = dev,
+ .regmap = axp20x->regmap,
+ .driver_data = axp20x,
+ };
+ int ret, i;
+ u32 workmode;
+ const char *dcdc1_name = NULL;
+ const char *dcdc5_name = NULL;
+
+ /* This only sets the dcdc freq. Ignore any errors */
+ axp_regulator_parse_dt(dev);
+
+ for (i = 0; i < axp_cfg->nregulators; i++) {
+ const struct regulator_desc *desc = &axp_cfg->regulators[i];
+ struct regulator_desc *new_desc;
+
+ if (axp_cfg->skip_bitmap & (1 << i))
+ continue;
+
+ /*
+ * Regulators DC1SW and DC5LDO are connected internally,
+ * so we have to handle their supply names separately.
+ *
+ * We always register the regulators in proper sequence,
+ * so the supply names are correctly read. See the last
+ * part of this loop to see where we save the DT defined
+ * name.
+ */
+ if (i == axp_cfg->dc1sw_ix && dcdc1_name) {
+ new_desc = devm_kzalloc(dev, sizeof(*desc),
+ GFP_KERNEL);
+ *new_desc = *desc;
+ new_desc->supply_name = dcdc1_name;
+ desc = new_desc;
+ }
+
+ if (i == axp_cfg->dc5ldo_ix && dcdc5_name) {
+ new_desc = devm_kzalloc(dev, sizeof(*desc),
+ GFP_KERNEL);
+ *new_desc = *desc;
+ new_desc->supply_name = dcdc5_name;
+ desc = new_desc;
+ }
+
+ rdev = devm_regulator_register(dev, desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register %s\n",
+ axp_cfg->regulators[i].name);
+
+ return PTR_ERR(rdev);
+ }
+
+ ret = of_property_read_u32(rdev->dev.of_node,
+ "x-powers,dcdc-workmode",
+ &workmode);
+ if (!ret) {
+ if (axp_set_dcdc_workmode(rdev, i, workmode))
+ dev_err(dev, "Failed to set workmode on %s\n",
+ rdev->desc->name);
+ }
+
+ /*
+ * Save AXP22X DCDC1 / DCDC5 regulator names for later.
+ */
+ if (i == axp_cfg->dcdc1_ix)
+ of_property_read_string(rdev->dev.of_node,
+ "regulator-name",
+ &dcdc1_name);
+ if (i == axp_cfg->dcdc5_ix)
+ of_property_read_string(rdev->dev.of_node,
+ "regulator-name",
+ &dcdc5_name);
+ }
+
+ if (axp_cfg->drivevbus) {
+ /* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
+ regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
+ AXP22X_MISC_N_VBUSEN_FUNC, 0);
+ rdev = devm_regulator_register(dev,
+ &axp22x_drivevbus_regulator,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register drivevbus\n");
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(axp_regulator_create);
+
+MODULE_AUTHOR("Carlo Caione <carlo@...one.org>");
+MODULE_DESCRIPTION("Regulator Module for AXP PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/axp-regulator.h b/drivers/regulator/axp-regulator.h
new file mode 100644
index 0000000..0adf1b0
--- /dev/null
+++ b/drivers/regulator/axp-regulator.h
@@ -0,0 +1,127 @@
+#ifndef __AXP_REGULATOR_H__
+#define __AXP_REGULATOR_H__
+/*
+ * Copyright (C) 2016 Jean-Francois Moine <moinejf@...e.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#define AXP20X_IO_ENABLED 0x03
+#define AXP20X_IO_DISABLED 0x07
+
+#define AXP22X_IO_ENABLED 0x03
+#define AXP22X_IO_DISABLED 0x04
+
+#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _enable_val, _disable_val) \
+ [_family##_##_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _family##_##_id, \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_val = (_enable_val), \
+ .disable_val = (_disable_val), \
+ .ops = &axp_ops, \
+ }
+
+#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask) \
+ [_family##_##_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _family##_##_id, \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .ops = &axp_ops, \
+ }
+
+#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \
+ [_family##_##_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _family##_##_id, \
+ .owner = THIS_MODULE, \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .ops = &axp_ops_sw, \
+ }
+
+#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
+ [_family##_##_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _family##_##_id, \
+ .n_voltages = 1, \
+ .owner = THIS_MODULE, \
+ .min_uV = (_volt) * 1000, \
+ .ops = &axp_ops_fixed \
+ }
+
+#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \
+ _vreg, _vmask, _ereg, _emask) \
+ [_family##_##_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _family##_##_id, \
+ .n_voltages = (_n_voltages), \
+ .owner = THIS_MODULE, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .linear_ranges = (_ranges), \
+ .n_linear_ranges = ARRAY_SIZE(_ranges), \
+ .ops = &axp_ops_range, \
+ }
+
+extern const struct regulator_ops axp_ops;
+extern const struct regulator_ops axp_ops_fixed;
+extern const struct regulator_ops axp_ops_range;
+extern const struct regulator_ops axp_ops_sw;
+
+struct axp_cfg {
+ const struct regulator_desc *regulators;
+ u8 nregulators;
+ s8 dcdc1_ix;
+ s8 dcdc5_ix;
+ s8 dc1sw_ix;
+ s8 dc5ldo_ix;
+ u32 skip_bitmap;
+ bool drivevbus;
+};
+
+int axp_regulator_create(struct device *dev,
+ const struct axp_cfg *axp_cfg);
+
+#endif /* __AXP_REGULATOR_H__ */
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 244ddc3..9dd9ca3 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -24,137 +24,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
-#define AXP20X_IO_ENABLED 0x03
-#define AXP20X_IO_DISABLED 0x07
-
-#define AXP22X_IO_ENABLED 0x03
-#define AXP22X_IO_DISABLED 0x04
-
-#define AXP20X_WORKMODE_DCDC2_MASK BIT(2)
-#define AXP20X_WORKMODE_DCDC3_MASK BIT(1)
-#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT(x)
-
-#define AXP20X_FREQ_DCDC_MASK 0x0f
-
-#define AXP22X_MISC_N_VBUSEN_FUNC BIT(4)
-
-#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
- _vmask, _ereg, _emask, _enable_val, _disable_val) \
- [_family##_##_id] = { \
- .name = (_match), \
- .supply_name = (_supply), \
- .of_match = of_match_ptr(_match), \
- .regulators_node = of_match_ptr("regulators"), \
- .type = REGULATOR_VOLTAGE, \
- .id = _family##_##_id, \
- .n_voltages = (((_max) - (_min)) / (_step) + 1), \
- .owner = THIS_MODULE, \
- .min_uV = (_min) * 1000, \
- .uV_step = (_step) * 1000, \
- .vsel_reg = (_vreg), \
- .vsel_mask = (_vmask), \
- .enable_reg = (_ereg), \
- .enable_mask = (_emask), \
- .enable_val = (_enable_val), \
- .disable_val = (_disable_val), \
- .ops = &axp20x_ops, \
- }
-
-#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
- _vmask, _ereg, _emask) \
- [_family##_##_id] = { \
- .name = (_match), \
- .supply_name = (_supply), \
- .of_match = of_match_ptr(_match), \
- .regulators_node = of_match_ptr("regulators"), \
- .type = REGULATOR_VOLTAGE, \
- .id = _family##_##_id, \
- .n_voltages = (((_max) - (_min)) / (_step) + 1), \
- .owner = THIS_MODULE, \
- .min_uV = (_min) * 1000, \
- .uV_step = (_step) * 1000, \
- .vsel_reg = (_vreg), \
- .vsel_mask = (_vmask), \
- .enable_reg = (_ereg), \
- .enable_mask = (_emask), \
- .ops = &axp20x_ops, \
- }
-
-#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \
- [_family##_##_id] = { \
- .name = (_match), \
- .supply_name = (_supply), \
- .of_match = of_match_ptr(_match), \
- .regulators_node = of_match_ptr("regulators"), \
- .type = REGULATOR_VOLTAGE, \
- .id = _family##_##_id, \
- .owner = THIS_MODULE, \
- .enable_reg = (_ereg), \
- .enable_mask = (_emask), \
- .ops = &axp20x_ops_sw, \
- }
-
-#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
- [_family##_##_id] = { \
- .name = (_match), \
- .supply_name = (_supply), \
- .of_match = of_match_ptr(_match), \
- .regulators_node = of_match_ptr("regulators"), \
- .type = REGULATOR_VOLTAGE, \
- .id = _family##_##_id, \
- .n_voltages = 1, \
- .owner = THIS_MODULE, \
- .min_uV = (_volt) * 1000, \
- .ops = &axp20x_ops_fixed \
- }
-
-#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \
- _vreg, _vmask, _ereg, _emask) \
- [_family##_##_id] = { \
- .name = (_match), \
- .supply_name = (_supply), \
- .of_match = of_match_ptr(_match), \
- .regulators_node = of_match_ptr("regulators"), \
- .type = REGULATOR_VOLTAGE, \
- .id = _family##_##_id, \
- .n_voltages = (_n_voltages), \
- .owner = THIS_MODULE, \
- .vsel_reg = (_vreg), \
- .vsel_mask = (_vmask), \
- .enable_reg = (_ereg), \
- .enable_mask = (_emask), \
- .linear_ranges = (_ranges), \
- .n_linear_ranges = ARRAY_SIZE(_ranges), \
- .ops = &axp20x_ops_range, \
- }
-
-static struct regulator_ops axp20x_ops_fixed = {
- .list_voltage = regulator_list_voltage_linear,
-};
-
-static struct regulator_ops axp20x_ops_range = {
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear_range,
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
-};
-
-static struct regulator_ops axp20x_ops = {
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear,
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
-};
-
-static struct regulator_ops axp20x_ops_sw = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
-};
+#include "axp-regulator.h"
static const struct regulator_linear_range axp20x_ldo4_ranges[] = {
REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0),
@@ -232,18 +102,6 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
};
-static const struct regulator_desc axp22x_drivevbus_regulator = {
- .name = "drivevbus",
- .supply_name = "drivevbus",
- .of_match = of_match_ptr("drivevbus"),
- .regulators_node = of_match_ptr("regulators"),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_reg = AXP20X_VBUS_IPSOUT_MGMT,
- .enable_mask = BIT(2),
- .ops = &axp20x_ops_sw,
-};
-
static const struct regulator_linear_range axp806_dcdca_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
@@ -347,135 +205,6 @@ static const struct regulator_desc axp809_regulators[] = {
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
};
-static int axp20x_set_dcdc_freq(struct device *dev, u32 dcdcfreq)
-{
- struct axp20x_dev *axp20x = dev_get_drvdata(dev);
- unsigned int reg = AXP20X_DCDC_FREQ;
- u32 min, max, def, step;
-
- switch (axp20x->variant) {
- case AXP202_ID:
- case AXP209_ID:
- min = 750;
- max = 1875;
- def = 1500;
- step = 75;
- break;
- case AXP806_ID:
- /*
- * AXP806 DCDC work frequency setting has the same range and
- * step as AXP22X, but at a different register.
- * Fall through to the check below.
- * (See include/linux/mfd/axp20x.h)
- */
- reg = AXP806_DCDC_FREQ_CTRL;
- case AXP221_ID:
- case AXP223_ID:
- case AXP809_ID:
- min = 1800;
- max = 4050;
- def = 3000;
- step = 150;
- break;
- default:
- dev_err(dev,
- "Setting DCDC frequency for unsupported AXP variant\n");
- return -EINVAL;
- }
-
- if (dcdcfreq == 0)
- dcdcfreq = def;
-
- if (dcdcfreq < min) {
- dcdcfreq = min;
- dev_warn(dev, "DCDC frequency too low. Set to %ukHz\n",
- min);
- }
-
- if (dcdcfreq > max) {
- dcdcfreq = max;
- dev_warn(dev, "DCDC frequency too high. Set to %ukHz\n",
- max);
- }
-
- dcdcfreq = (dcdcfreq - min) / step;
-
- return regmap_update_bits(axp20x->regmap, reg,
- AXP20X_FREQ_DCDC_MASK, dcdcfreq);
-}
-
-static int axp20x_regulator_parse_dt(struct device *dev)
-{
- struct device_node *np, *regulators;
- int ret;
- u32 dcdcfreq = 0;
-
- np = of_node_get(dev->of_node);
- if (!np)
- return 0;
-
- regulators = of_get_child_by_name(np, "regulators");
- if (!regulators) {
- dev_warn(dev, "regulators node not found\n");
- } else {
- of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
- ret = axp20x_set_dcdc_freq(dev, dcdcfreq);
- if (ret < 0) {
- dev_err(dev, "Error setting dcdc frequency: %d\n", ret);
- return ret;
- }
-
- of_node_put(regulators);
- }
-
- return 0;
-}
-
-static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
-{
- struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
- unsigned int reg = AXP20X_DCDC_MODE;
- unsigned int mask;
-
- switch (axp20x->variant) {
- case AXP202_ID:
- case AXP209_ID:
- if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
- return -EINVAL;
-
- mask = AXP20X_WORKMODE_DCDC2_MASK;
- if (id == AXP20X_DCDC3)
- mask = AXP20X_WORKMODE_DCDC3_MASK;
-
- workmode <<= ffs(mask) - 1;
- break;
-
- case AXP806_ID:
- reg = AXP806_DCDC_MODE_CTRL2;
- /*
- * AXP806 DCDC regulator IDs have the same range as AXP22X.
- * Fall through to the check below.
- * (See include/linux/mfd/axp20x.h)
- */
- case AXP221_ID:
- case AXP223_ID:
- case AXP809_ID:
- if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
- return -EINVAL;
-
- mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
- workmode <<= id - AXP22X_DCDC1;
- break;
-
- default:
- /* should not happen */
- WARN_ON(1);
- return -EINVAL;
- }
-
- return regmap_update_bits(rdev->regmap, reg, mask, workmode);
-}
-
/*
* This function checks which regulators are part of poly-phase
* output setups based on the registers settings.
@@ -500,60 +229,51 @@ static u32 axp20x_polyphase_slave(struct axp20x_dev *axp20x)
static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct device *dev = pdev->dev.parent;
- struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(dev);
- const struct regulator_desc *regulators;
- struct regulator_config config = {
- .dev = dev,
- .regmap = axp20x->regmap,
- .driver_data = axp20x,
- };
- int ret, i, nregulators;
- u32 workmode;
- const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
- const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
- s8 dcdc1_ix = -1;
- s8 dcdc5_ix = -1;
- s8 dc1sw_ix = -1;
- s8 dc5ldo_ix = -1;
- bool drivevbus = false;
- u32 skip_bitmap = 0;
+ struct axp_cfg axp_cfg;
+
+ axp_cfg.dcdc1_ix = -1;
+ axp_cfg.dcdc5_ix = -1;
+ axp_cfg.dc1sw_ix = -1;
+ axp_cfg.dc5ldo_ix = -1;
+ axp_cfg.drivevbus = false;
+ axp_cfg.skip_bitmap = 0;
switch (axp20x->variant) {
case AXP202_ID:
case AXP209_ID:
- regulators = axp20x_regulators;
- nregulators = AXP20X_REG_ID_MAX;
+ axp_cfg.regulators = axp20x_regulators;
+ axp_cfg.nregulators = AXP20X_REG_ID_MAX;
break;
case AXP221_ID:
case AXP223_ID:
- regulators = axp22x_regulators;
- nregulators = AXP22X_REG_ID_MAX;
- dcdc1_ix = AXP22X_DCDC1;
- dcdc5_ix = AXP22X_DCDC5;
- dc1sw_ix = AXP22X_DC1SW;
- dc5ldo_ix = AXP22X_DC5LDO;
- drivevbus = of_property_read_bool(dev->of_node,
+ axp_cfg.regulators = axp22x_regulators;
+ axp_cfg.nregulators = AXP22X_REG_ID_MAX;
+ axp_cfg.dcdc1_ix = AXP22X_DCDC1;
+ axp_cfg.dcdc5_ix = AXP22X_DCDC5;
+ axp_cfg.dc1sw_ix = AXP22X_DC1SW;
+ axp_cfg.dc5ldo_ix = AXP22X_DC5LDO;
+ axp_cfg.drivevbus = of_property_read_bool(dev->of_node,
"x-powers,drive-vbus-en");
break;
case AXP806_ID:
- regulators = axp806_regulators;
- nregulators = AXP806_REG_ID_MAX;
+ axp_cfg.regulators = axp806_regulators;
+ axp_cfg.nregulators = AXP806_REG_ID_MAX;
/*
* The regulators which are slave in a poly-phase setup
* are skipped, as their controls are bound to the master
* regulator and won't work.
*/
- skip_bitmap |= axp20x_polyphase_slave(axp20x);
+ axp_cfg.skip_bitmap |= axp20x_polyphase_slave(axp20x);
break;
case AXP809_ID:
- regulators = axp809_regulators;
- nregulators = AXP809_REG_ID_MAX;
- dcdc1_ix = AXP809_DCDC1;
- dcdc5_ix = AXP809_DCDC5;
- dc1sw_ix = AXP809_DC1SW;
- dc5ldo_ix = AXP809_DC5LDO;
+ axp_cfg.regulators = axp809_regulators;
+ axp_cfg.nregulators = AXP809_REG_ID_MAX;
+ axp_cfg.dcdc1_ix = AXP809_DCDC1;
+ axp_cfg.dcdc5_ix = AXP809_DCDC5;
+ axp_cfg.dc1sw_ix = AXP809_DC1SW;
+ axp_cfg.dc5ldo_ix = AXP809_DC5LDO;
break;
default:
dev_err(dev, "Unsupported AXP variant: %ld\n",
@@ -561,86 +281,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
return -EINVAL;
}
- /* This only sets the dcdc freq. Ignore any errors */
- axp20x_regulator_parse_dt(dev);
-
- for (i = 0; i < nregulators; i++) {
- const struct regulator_desc *desc = ®ulators[i];
- struct regulator_desc *new_desc;
-
- if (skip_bitmap & (1 << i))
- continue;
-
- /*
- * Regulators DC1SW and DC5LDO are connected internally,
- * so we have to handle their supply names separately.
- *
- * We always register the regulators in proper sequence,
- * so the supply names are correctly read. See the last
- * part of this loop to see where we save the DT defined
- * name.
- */
- if (i == dc1sw_ix && dcdc1_name) {
- new_desc = devm_kzalloc(dev, sizeof(*desc),
- GFP_KERNEL);
- *new_desc = regulators[i];
- new_desc->supply_name = dcdc1_name;
- desc = new_desc;
- }
-
- if (i == dc5ldo_ix && dcdc5_name) {
- new_desc = devm_kzalloc(dev, sizeof(*desc),
- GFP_KERNEL);
- *new_desc = regulators[i];
- new_desc->supply_name = dcdc5_name;
- desc = new_desc;
- }
-
- rdev = devm_regulator_register(dev, desc, &config);
- if (IS_ERR(rdev)) {
- dev_err(dev, "Failed to register %s\n",
- regulators[i].name);
-
- return PTR_ERR(rdev);
- }
-
- ret = of_property_read_u32(rdev->dev.of_node,
- "x-powers,dcdc-workmode",
- &workmode);
- if (!ret) {
- if (axp20x_set_dcdc_workmode(rdev, i, workmode))
- dev_err(dev, "Failed to set workmode on %s\n",
- rdev->desc->name);
- }
-
- /*
- * Save AXP22X DCDC1 / DCDC5 regulator names for later.
- */
- if (i == dcdc1_ix)
- of_property_read_string(rdev->dev.of_node,
- "regulator-name",
- &dcdc1_name);
-
- if (i == dcdc5_ix)
- of_property_read_string(rdev->dev.of_node,
- "regulator-name",
- &dcdc5_name);
- }
-
- if (drivevbus) {
- /* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
- regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
- AXP22X_MISC_N_VBUSEN_FUNC, 0);
- rdev = devm_regulator_register(dev,
- &axp22x_drivevbus_regulator,
- &config);
- if (IS_ERR(rdev)) {
- dev_err(dev, "Failed to register drivevbus\n");
- return PTR_ERR(rdev);
- }
- }
-
- return 0;
+ return axp_regulator_create(dev, &axp_cfg);
}
static struct platform_driver axp20x_regulator_driver = {
--
2.10.0
Powered by blists - more mailing lists