| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGb2v64ZpQ=9KUH39cFoRxU6n03cgDoUbHegjFfDWaTLQAZ2wg@mail.gmail.com>
Date: Sat, 24 Sep 2016 16:29:11 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Jean-Francois Moine <moinejf@...e.fr>
Cc: Chen-Yu Tsai <wens@...e.org>, Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH 3/3] regulator: axp20x: simplify device access
Hi,
On Thu, Sep 22, 2016 at 2:20 AM, Jean-Francois Moine <moinejf@...e.fr> wrote:
> Use the pointer to the main regulator device instead of the pointer
> to the child platform device.
>
> Signed-off-by: Jean-Francois Moine <moinejf@...e.fr>
> ---
> drivers/regulator/axp20x-regulator.c | 45 ++++++++++++++++++------------------
> 1 file changed, 23 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index 7405f5b..244ddc3 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -347,9 +347,9 @@ static const struct regulator_desc axp809_regulators[] = {
> AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
> };
>
> -static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
> +static int axp20x_set_dcdc_freq(struct device *dev, u32 dcdcfreq)
> {
> - struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> + struct axp20x_dev *axp20x = dev_get_drvdata(dev);
> unsigned int reg = AXP20X_DCDC_FREQ;
> u32 min, max, def, step;
>
> @@ -378,7 +378,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
> step = 150;
> break;
> default:
> - dev_err(&pdev->dev,
> + dev_err(dev,
> "Setting DCDC frequency for unsupported AXP variant\n");
> return -EINVAL;
> }
> @@ -388,13 +388,13 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
>
> if (dcdcfreq < min) {
> dcdcfreq = min;
> - dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n",
> + dev_warn(dev, "DCDC frequency too low. Set to %ukHz\n",
> min);
> }
>
> if (dcdcfreq > max) {
> dcdcfreq = max;
> - dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n",
> + dev_warn(dev, "DCDC frequency too high. Set to %ukHz\n",
> max);
> }
>
> @@ -404,24 +404,24 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
> AXP20X_FREQ_DCDC_MASK, dcdcfreq);
> }
>
> -static int axp20x_regulator_parse_dt(struct platform_device *pdev)
> +static int axp20x_regulator_parse_dt(struct device *dev)
> {
> struct device_node *np, *regulators;
> int ret;
> u32 dcdcfreq = 0;
>
> - np = of_node_get(pdev->dev.parent->of_node);
> + np = of_node_get(dev->of_node);
> if (!np)
> return 0;
>
> regulators = of_get_child_by_name(np, "regulators");
> if (!regulators) {
> - dev_warn(&pdev->dev, "regulators node not found\n");
> + dev_warn(dev, "regulators node not found\n");
> } else {
> of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
> - ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
> + ret = axp20x_set_dcdc_freq(dev, dcdcfreq);
> if (ret < 0) {
> - dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
> + dev_err(dev, "Error setting dcdc frequency: %d\n", ret);
> return ret;
> }
>
> @@ -499,11 +499,12 @@ static u32 axp20x_polyphase_slave(struct axp20x_dev *axp20x)
>
> static int axp20x_regulator_probe(struct platform_device *pdev)
> {
> + struct device *dev = pdev->dev.parent;
There are 2 struct device's in play in this function, 1 from the parent,
and 1 for the platform device for this regulator sub-device.
> struct regulator_dev *rdev;
> - struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> + struct axp20x_dev *axp20x = dev_get_drvdata(dev);
> const struct regulator_desc *regulators;
> struct regulator_config config = {
> - .dev = pdev->dev.parent,
> + .dev = dev,
> .regmap = axp20x->regmap,
> .driver_data = axp20x,
> };
> @@ -532,7 +533,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> dcdc5_ix = AXP22X_DCDC5;
> dc1sw_ix = AXP22X_DC1SW;
> dc5ldo_ix = AXP22X_DC5LDO;
> - drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
> + drivevbus = of_property_read_bool(dev->of_node,
> "x-powers,drive-vbus-en");
> break;
> case AXP806_ID:
> @@ -555,13 +556,13 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> dc5ldo_ix = AXP809_DC5LDO;
> break;
> default:
> - dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
> + dev_err(dev, "Unsupported AXP variant: %ld\n",
So this one is incorrect. You should use this device's struct,
not the parent. It's possible the mfd driver supports a PMIC,
but the regulator driver is still missing.
> axp20x->variant);
> return -EINVAL;
> }
>
> /* This only sets the dcdc freq. Ignore any errors */
> - axp20x_regulator_parse_dt(pdev);
> + axp20x_regulator_parse_dt(dev);
>
> for (i = 0; i < nregulators; i++) {
> const struct regulator_desc *desc = ®ulators[i];
> @@ -580,7 +581,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> * name.
> */
> if (i == dc1sw_ix && dcdc1_name) {
> - new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
> + new_desc = devm_kzalloc(dev, sizeof(*desc),
> GFP_KERNEL);
> *new_desc = regulators[i];
> new_desc->supply_name = dcdc1_name;
> @@ -588,16 +589,16 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> }
>
> if (i == dc5ldo_ix && dcdc5_name) {
> - new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
> + new_desc = devm_kzalloc(dev, sizeof(*desc),
> GFP_KERNEL);
Same here. The devres lifetime should be bound to this driver, not the parent.
> *new_desc = regulators[i];
> new_desc->supply_name = dcdc5_name;
> desc = new_desc;
> }
>
> - rdev = devm_regulator_register(&pdev->dev, desc, &config);
> + rdev = devm_regulator_register(dev, desc, &config);
Same here.
> if (IS_ERR(rdev)) {
> - dev_err(&pdev->dev, "Failed to register %s\n",
> + dev_err(dev, "Failed to register %s\n",
Same here.
> regulators[i].name);
>
> return PTR_ERR(rdev);
> @@ -608,7 +609,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> &workmode);
> if (!ret) {
> if (axp20x_set_dcdc_workmode(rdev, i, workmode))
> - dev_err(&pdev->dev, "Failed to set workmode on %s\n",
> + dev_err(dev, "Failed to set workmode on %s\n",
Same here.
> rdev->desc->name);
> }
>
> @@ -630,11 +631,11 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> /* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
> regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
> AXP22X_MISC_N_VBUSEN_FUNC, 0);
> - rdev = devm_regulator_register(&pdev->dev,
> + rdev = devm_regulator_register(dev,
Same here.
> &axp22x_drivevbus_regulator,
> &config);
> if (IS_ERR(rdev)) {
> - dev_err(&pdev->dev, "Failed to register drivevbus\n");
> + dev_err(dev, "Failed to register drivevbus\n");
Same here.
Regards
ChenYu
> return PTR_ERR(rdev);
> }
> }
> --
> 2.10.0
>
Powered by blists - more mailing lists