linux-kernel - Re: [PATCH] tty/serial: atmel: fix fractional baud rate computation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160925141444.1df4be84@bbrezillon>
Date:   Sun, 25 Sep 2016 14:14:44 +0200
From:   Boris Brezillon <boris.brezillon@...e-electrons.com>
To:     Nicolas Ferre <nicolas.ferre@...el.com>
Cc:     <aystarik@...il.com>,
        Ludovic Desroches <ludovic.desroches@...el.com>,
        <richard.genoud@...il.com>, <linux-serial@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        Cyrille Pitchen <cyrille.pitchen@...el.com>,
        Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH] tty/serial: atmel: fix fractional baud rate computation

On Wed, 21 Sep 2016 12:44:14 +0200
Nicolas Ferre <nicolas.ferre@...el.com> wrote:

> From: Alexey Starikovskiy <aystarik@...il.com>
> 
> The problem with previous code was it rounded values in wrong
> place and produced wrong baud rate in some cases.
> 
> Signed-off-by: Alexey Starikovskiy <aystarik@...il.com>
> [nicolas.ferre@...el.com: port to newer kernel and add commit log]
> Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>

Reviewed-by: Boris Brezillon <boris.brezillon@...e-electrons.com>

> ---
>  drivers/tty/serial/atmel_serial.c | 10 ++++++----
>  include/linux/atmel_serial.h      |  1 +
>  2 files changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 5f550d9feed9..fd8aa1f4ba78 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -2170,13 +2170,15 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
>  	 * accurately. This feature is enabled only when using normal mode.
>  	 * baudrate = selected clock / (8 * (2 - OVER) * (CD + FP / 8))
>  	 * Currently, OVER is always set to 0 so we get
> -	 * baudrate = selected clock (16 * (CD + FP / 8))
> +	 * baudrate = selected clock / (16 * (CD + FP / 8))
> +	 * then
> +	 * 8 CD + FP = selected clock / (2 * baudrate)
>  	 */
>  	if (atmel_port->has_frac_baudrate &&
>  	    (mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_NORMAL) {
> -		div = DIV_ROUND_CLOSEST(port->uartclk, baud);
> -		cd = div / 16;
> -		fp = DIV_ROUND_CLOSEST(div % 16, 2);
> +		div = DIV_ROUND_CLOSEST(port->uartclk, baud * 2);
> +		cd = div >> 3;
> +		fp = div & ATMEL_US_FP_MASK;
>  	} else {
>  		cd = uart_get_divisor(port, baud);
>  	}
> diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
> index f8e452aa48d7..bd2560502f3c 100644
> --- a/include/linux/atmel_serial.h
> +++ b/include/linux/atmel_serial.h
> @@ -119,6 +119,7 @@
>  #define ATMEL_US_BRGR		0x20	/* Baud Rate Generator Register */
>  #define	ATMEL_US_CD		GENMASK(15, 0)	/* Clock Divider */
>  #define ATMEL_US_FP_OFFSET	16	/* Fractional Part */
> +#define ATMEL_US_FP_MASK	0x7
>  
>  #define ATMEL_US_RTOR		0x24	/* Receiver Time-out Register for USART */
>  #define ATMEL_UA_RTOR		0x28	/* Receiver Time-out Register for UART */