[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #111 SMP Wed Sep 28 18:50:17 CEST 2016 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.2 present. [ 0.000000] DMI: VIA Technologies, Inc. VT82C694X/694X, BIOS 6.00 PG 02/19/2002 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C9FFF write-protect [ 0.000000] CA000-EFFFF uncachable [ 0.000000] F0000-F7FFF write-through [ 0.000000] F8000-F8FFF uncachable [ 0.000000] F9000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6C00 000014 (v00 VIA694) [ 0.000000] ACPI: RSDT 0x000000001FFF3000 000028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x000000001FFF3040 000074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0x000000001FFF30C0 002587 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x000000001FFF0000 000040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffeffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffeffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff] [ 0.000000] On node 0 totalpages: 130958 [ 0.000000] free_area_init_node: node 0, pgdat c15b1c00, node_mem_map dfbf0020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 126960 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @dfbd9000 s47980 r0 d29844 u77824 [ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-reverted root=/dev/sda1 ro resume=/dev/sda2 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 512284K/523832K available (3918K kernel code, 437K rwdata, 1520K rodata, 524K init, 412K bss, 11548K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc15c1000 - 0xc1644000 ( 524 kB) .data : 0xc13d3be1 - 0xc15bf6a0 (1966 kB) .text : 0xc1000000 - 0xc13d3be1 (3918 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1199.503 MHz processor [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2399.00 BogoMIPS (lpj=4798012) [ 0.004102] pid_max: default: 32768 minimum: 301 [ 0.004173] ACPI: Core revision 20160422 [ 0.009222] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.009366] ACPI: setting ELCR to 0800 (from 0e00) [ 0.009481] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.009529] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010375] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2 [ 0.010444] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.014109] Freeing SMP alternatives memory: 16K (c1644000 - c1648000) [ 0.016481] smpboot: Max logical packages: 1 [ 0.016539] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.016585] smpboot: SMP motherboard not detected [ 0.016627] smpboot: SMP disabled [ 0.016673] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.016720] Performance Events: [ 0.016766] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.016848] no hardware sampling interrupt available. [ 0.016895] p6 PMU driver. [ 0.016943] ... version: 0 [ 0.016985] ... bit width: 32 [ 0.017030] ... generic registers: 2 [ 0.017072] ... value mask: 00000000ffffffff [ 0.017117] ... max period: 000000007fffffff [ 0.017160] ... fixed-purpose events: 0 [ 0.017202] ... event mask: 0000000000000003 [ 0.018269] x86: Booted up 1 node, 1 CPUs [ 0.018341] smpboot: Total of 1 processors activated (2399.00 BogoMIPS) [ 0.018888] devtmpfs: initialized [ 0.020162] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes) [ 0.020408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.020751] NET: Registered protocol family 16 [ 0.021229] cpuidle: using governor ladder [ 0.021287] cpuidle: using governor menu [ 0.021442] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.021508] ACPI: bus type PCI registered [ 0.064935] PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=1 [ 0.064988] PCI: Using configuration type 1 for base access [ 0.068811] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.069308] ACPI: Added _OSI(Module Device) [ 0.069362] ACPI: Added _OSI(Processor Device) [ 0.069406] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.069451] ACPI: Added _OSI(Processor Aggregator Device) [ 0.073956] ACPI: Interpreter enabled [ 0.074077] ACPI: (supports S0 S1 S4 S5) [ 0.074125] ACPI: Using PIC for interrupt routing [ 0.074224] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.081632] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.081712] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.081771] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.081831] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.082003] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.082008] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.082012] acpi PNP0A03:00: host bridge window [io 0x0d00-0x3fff window] (ignored) [ 0.082016] acpi PNP0A03:00: host bridge window [io 0x4000-0x407f] (ignored) [ 0.082020] acpi PNP0A03:00: host bridge window [io 0x4080-0x40ff] (ignored) [ 0.082025] acpi PNP0A03:00: host bridge window [io 0x4100-0x4fff window] (ignored) [ 0.082029] acpi PNP0A03:00: host bridge window [io 0x5000-0x500f] (ignored) [ 0.082033] acpi PNP0A03:00: host bridge window [io 0x5010-0x5fff window] (ignored) [ 0.082037] acpi PNP0A03:00: host bridge window [io 0x6000-0x607f] (ignored) [ 0.082041] acpi PNP0A03:00: host bridge window [io 0x6080-0xffff window] (ignored) [ 0.082045] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.082050] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored) [ 0.082054] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xffefffff window] (ignored) [ 0.082057] PCI: root bus 00: using default resources [ 0.082182] PCI host bridge to bus 0000:00 [ 0.082232] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.082279] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.082327] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.082396] pci 0000:00:00.0: [1106:0691] type 00 class 0x060000 [ 0.082418] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref] [ 0.082656] pci 0000:00:01.0: [1106:8598] type 01 class 0x060400 [ 0.082706] pci 0000:00:01.0: supports D1 [ 0.082848] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100 [ 0.083105] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a [ 0.083151] pci 0000:00:07.1: reg 0x20: [io 0xd000-0xd00f] [ 0.083172] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.083225] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.083272] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.083320] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.083533] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300 [ 0.083575] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f] [ 0.083698] pci 0000:00:07.2: System wakeup disabled by ACPI [ 0.083860] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300 [ 0.083902] pci 0000:00:07.3: reg 0x20: [io 0xd800-0xd81f] [ 0.084098] pci 0000:00:07.3: System wakeup disabled by ACPI [ 0.084265] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000 [ 0.084329] pci 0000:00:07.4: quirk: [io 0x6000-0x607f] claimed by vt82c686 HW-mon [ 0.084384] pci 0000:00:07.4: quirk: [io 0x5000-0x500f] claimed by vt82c686 SMB [ 0.084608] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100 [ 0.084626] pci 0000:00:07.5: reg 0x10: [io 0xdc00-0xdcff] [ 0.084637] pci 0000:00:07.5: reg 0x14: [io 0xe000-0xe003] [ 0.084649] pci 0000:00:07.5: reg 0x18: [io 0xe400-0xe403] [ 0.084876] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000 [ 0.084893] pci 0000:00:0f.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.084904] pci 0000:00:0f.0: reg 0x14: [mem 0xe8000000-0xe80000ff] [ 0.084967] pci 0000:00:0f.0: supports D1 D2 [ 0.084972] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot [ 0.085215] pci 0000:01:00.0: [10de:002d] type 00 class 0x030000 [ 0.085232] pci 0000:01:00.0: reg 0x10: [mem 0xe6000000-0xe6ffffff] [ 0.085243] pci 0000:01:00.0: reg 0x14: [mem 0xe4000000-0xe5ffffff pref] [ 0.085276] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.085414] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.085471] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xe7ffffff] [ 0.085477] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff pref] [ 0.085488] pci_bus 0000:00: on NUMA node 0 [ 0.085864] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.086574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.087401] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.088227] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 [ 0.090614] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.090671] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.090721] vgaarb: loaded [ 0.090764] vgaarb: bridge control possible 0000:01:00.0 [ 0.091052] SCSI subsystem initialized [ 0.091256] libata version 3.00 loaded. [ 0.091273] ACPI: bus type USB registered [ 0.091394] usbcore: registered new interface driver usbfs [ 0.091471] usbcore: registered new interface driver hub [ 0.091553] usbcore: registered new device driver usb [ 0.091672] PCI: Using ACPI for IRQ routing [ 0.091724] PCI: pci_cache_line_size set to 32 bytes [ 0.091771] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.091777] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff] [ 0.092795] clocksource: Switched to clocksource pit [ 0.112748] pnp: PnP ACPI init [ 0.113642] system 00:00: [mem 0x000ca800-0x000cbfff] has been reserved [ 0.113707] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.113756] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.113805] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.113853] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved [ 0.113903] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 0.113950] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.114002] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved [ 0.114050] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.114114] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.114583] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.114642] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.114734] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.114994] pnp 00:03: [dma 2] [ 0.115096] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.116191] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.116305] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.116357] pnp: PnP ACPI: found 6 devices [ 0.116421] PnPBIOS: Disabled [ 0.156067] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.157336] clocksource: Switched to clocksource acpi_pm [ 0.157449] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe700ffff pref] [ 0.157504] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.157556] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xe7ffffff] [ 0.157607] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff pref] [ 0.157665] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.157669] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.157675] pci_bus 0000:01: resource 1 [mem 0xe6000000-0xe7ffffff] [ 0.157679] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xe5ffffff pref] [ 0.157789] NET: Registered protocol family 2 [ 0.158362] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.158479] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.158643] TCP: Hash tables configured (established 4096 bind 4096) [ 0.158772] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.158851] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.159134] NET: Registered protocol family 1 [ 0.159374] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.159430] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.160571] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.160622] PCI: setting IRQ 11 as level-triggered [ 0.160636] pci 0000:00:07.2: VIA VLink IRQ fixup, from 9 to 11 [ 0.161041] pci 0000:00:07.3: VIA VLink IRQ fixup, from 9 to 11 [ 0.161293] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.161350] PCI: CLS 32 bytes, default 32 [ 0.162745] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.163839] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.172227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.172305] io scheduler noop registered [ 0.172349] io scheduler deadline registered [ 0.172507] io scheduler cfq registered (default) [ 0.173233] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.173301] ACPI: Power Button [PWRB] [ 0.173508] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.173560] ACPI: Sleep Button [SLPB] [ 0.173751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.173803] ACPI: Power Button [PWRF] [ 0.173987] tsc: Marking TSC unstable due to TSC halts in idle [ 0.174189] Warning: Processor Platform Limit event detected, but not handled. [ 0.174242] Consider compiling CPUfreq support into your kernel. [ 0.174906] isapnp: Scanning for PnP cards... [ 0.261549] 01:01: card 'SYM 53C416' [ 0.261597] isapnp: 1 Plug & Play card detected total [ 0.261825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.263081] Non-volatile memory driver v1.3 [ 0.263140] Linux agpgart interface v0.103 [ 0.263253] [drm] Initialized drm 1.1.0 20060810 [ 0.270951] loop: module loaded [ 0.271307] pata_via 0000:00:07.1: version 0.3.4 [ 0.272681] scsi host0: pata_via [ 0.273100] scsi host1: pata_via [ 0.273304] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 0.273352] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 0.273577] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.273631] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 0.273732] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.274801] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.275559] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0x0001e800, 00:40:95:30:81:14, IRQ 11 [ 0.275659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.275706] ehci-pci: EHCI PCI platform driver [ 0.275793] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.275868] ohci-pci: OHCI PCI platform driver [ 0.275939] uhci_hcd: USB Universal Host Controller Interface driver [ 0.276722] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.276792] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.276893] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400 [ 0.277555] hub 1-0:1.0: USB hub found [ 0.277627] hub 1-0:1.0: 2 ports detected [ 0.278214] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 0.278290] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 0.278375] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800 [ 0.278997] hub 2-0:1.0: USB hub found [ 0.279066] hub 2-0:1.0: 2 ports detected [ 0.279539] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.280235] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.280295] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.280783] mousedev: PS/2 mouse device common for all mice [ 0.281749] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.281852] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram [ 0.282387] NET: Registered protocol family 17 [ 0.282593] Using IPI No-Shortcut mode [ 0.283036] registered taskstats version 1 [ 0.283703] rtc_cmos 00:02: setting system clock to 2016-09-28 19:08:23 UTC (1475089703) [ 0.283866] PM: Checking hibernation image partition /dev/sda2 [ 0.308156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.498866] ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100 [ 0.498926] ata1.00: 156301488 sectors, multi 16: LBA [ 0.501848] ata1.00: configured for UDMA/100 [ 0.502370] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00FM 3G13 PQ: 0 ANSI: 5 [ 0.503388] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.503616] sd 0:0:0:0: [sda] Write Protect is off [ 0.503664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.503722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.549410] sda: sda1 sda2 sda3 [ 0.550539] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.184055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x114a463e20c, max_idle_ns: 440795244235 ns [ 1.220974] random: fast init done [ 1.737116] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.740085] PM: Hibernation image partition 8:2 present [ 1.740087] PM: Looking for hibernation image. [ 1.740615] PM: Image not found (code -22) [ 1.740618] PM: Hibernation image not present or could not be loaded. [ 1.741202] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 1.785258] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.785379] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 1.786877] Freeing unused kernel memory: 524K (c15c1000 - c1644000) [ 1.787229] Write protecting the kernel text: 3920k [ 1.787356] Write protecting the kernel read-only data: 1528k [ 4.572096] random: crng init done [ 4.936733] systemd-udevd[179]: starting version 215 [ 6.795864] agpgart: Detected VIA Apollo Pro 133 chipset [ 6.804332] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 6.900951] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.130344] parport_pc: VIA 686A/8231 detected [ 7.130352] parport_pc: probing current configuration [ 7.130374] parport_pc: Current parallel port base: 0x0 [ 7.130377] parport_pc: VIA parallel port disabled in BIOS [ 7.200485] wmi: Mapper loaded [ 7.871076] nouveau 0000:01:00.0: NVIDIA NV05 (20154000) [ 7.890581] nouveau 0000:01:00.0: bios: version 02.05.20.02.00 [ 7.890993] nouveau 0000:01:00.0: bios: DCB table not found [ 7.891539] nouveau 0000:01:00.0: bios: DCB table not found [ 7.891794] nouveau 0000:01:00.0: bios: DCB table not found [ 7.891846] nouveau 0000:01:00.0: bios: DCB table not found [ 7.891928] nouveau 0000:01:00.0: bios: DCB table not found [ 7.893392] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 7.893474] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 7.893550] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 7.893637] nouveau 0000:01:00.0: tmr: unknown input clock freq [ 7.895889] nouveau 0000:01:00.0: fb: 32 MiB SDRAM [ 7.904312] [TTM] Zone kernel: Available graphics memory: 256412 kiB [ 7.904362] [TTM] Initializing pool allocator [ 7.904896] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB [ 7.904960] nouveau 0000:01:00.0: DRM: GART: 64 MiB [ 7.905009] nouveau 0000:01:00.0: DRM: BMP version 5.6 [ 7.905057] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS [ 7.908302] nouveau 0000:01:00.0: DRM: Saving VGA fonts [ 7.963697] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS [ 7.965090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.965154] [drm] Driver supports precise vblank timestamp query. [ 7.971540] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 8.054321] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo dd746000 [ 8.057924] fbcon: nouveaufb (fb0) is primary device [ 8.289029] Console: switching to colour frame buffer device 160x64 [ 8.294694] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 8.294742] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 9.548621] EXT4-fs (sda1): re-mounted. Opts: (null) [ 10.217650] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.864788] i2c /dev entries driver [ 17.113542] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000