| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160929133944.158596-2-mika.westerberg@linux.intel.com>
Date: Thu, 29 Sep 2016 16:39:41 +0300
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Alexandre Courbot <gnurou@...il.com>, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org,
Mika Westerberg <mika.westerberg@...ux.intel.com>
Subject: [PATCH v2 1/4] ACPI / property: Allow holes in reference properties
DT allows holes or empty phandles for references. This is used for example
in SPI subsystem where some chip selects are native and others are regular
GPIOs. In ACPI _DSD we currently do not support this but instead the
preceding reference consumes all following integer arguments.
For example we would like to support something like the below ASL fragment
for SPI:
Package () {
"cs-gpios",
Package () {
^GPIO, 19, 0, 0, // GPIO CS0
0, // Native CS
^GPIO, 20, 0, 0, // GPIO CS1
}
}
The zero in the middle means "no entry" or NULL reference. To support this
we change acpi_data_get_property_reference() to take firmware node and
num_args as argument and rename it to __acpi_node_get_property_reference().
The function returns -ENOENT if the given index resolves to "no entry"
reference and -ENODATA when there are no more entries in the property.
We then add static inline wrapper acpi_node_get_property_reference() that
passes MAX_ACPI_REFERENCE_ARGS as num_args to support the existing
behaviour which some drivers have been relying on.
Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
---
drivers/acpi/property.c | 117 ++++++++++++++++++++++++++++--------------------
include/linux/acpi.h | 22 +++++++--
2 files changed, 87 insertions(+), 52 deletions(-)
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
index f2fd3fee588a..03f5ec11ab31 100644
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -468,10 +468,11 @@ static int acpi_data_get_property_array(struct acpi_device_data *data,
}
/**
- * acpi_data_get_property_reference - returns handle to the referenced object
- * @data: ACPI device data object containing the property
+ * __acpi_node_get_property_reference - returns handle to the referenced object
+ * @fwnode: Firmware node to get the property from
* @propname: Name of the property
* @index: Index of the reference to return
+ * @num_args: Maximum number of arguments after each reference
* @args: Location to store the returned reference with optional arguments
*
* Find property with @name, verifify that it is a package containing at least
@@ -482,17 +483,40 @@ static int acpi_data_get_property_array(struct acpi_device_data *data,
* If there's more than one reference in the property value package, @index is
* used to select the one to return.
*
+ * It is possible to leave holes in the property value set like in the
+ * example below:
+ *
+ * Package () {
+ * "cs-gpios",
+ * Package () {
+ * ^GPIO, 19, 0, 0,
+ * ^GPIO, 20, 0, 0,
+ * 0,
+ * ^GPIO, 21, 0, 0,
+ * }
+ * }
+ *
+ * Calling this function with index %2 return %-ENOENT and with index %3
+ * returns the last entry. If the property does not contain any more values
+ * %-ENODATA is returned. The NULL entry must be single integer and
+ * preferably contain value %0.
+ *
* Return: %0 on success, negative error code on failure.
*/
-static int acpi_data_get_property_reference(struct acpi_device_data *data,
- const char *propname, size_t index,
- struct acpi_reference_args *args)
+int __acpi_node_get_property_reference(struct fwnode_handle *fwnode,
+ const char *propname, size_t index, size_t num_args,
+ struct acpi_reference_args *args)
{
const union acpi_object *element, *end;
const union acpi_object *obj;
+ struct acpi_device_data *data;
struct acpi_device *device;
int ret, idx = 0;
+ data = acpi_device_data_of_node(fwnode);
+ if (!data)
+ return -EINVAL;
+
ret = acpi_data_get_property(data, propname, ACPI_TYPE_ANY, &obj);
if (ret)
return ret;
@@ -532,59 +556,54 @@ static int acpi_data_get_property_reference(struct acpi_device_data *data,
while (element < end) {
u32 nargs, i;
- if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
- return -EPROTO;
-
- ret = acpi_bus_get_device(element->reference.handle, &device);
- if (ret)
- return -ENODEV;
-
- element++;
- nargs = 0;
-
- /* assume following integer elements are all args */
- for (i = 0; element + i < end; i++) {
- int type = element[i].type;
+ if (element->type == ACPI_TYPE_LOCAL_REFERENCE) {
+ ret = acpi_bus_get_device(element->reference.handle,
+ &device);
+ if (ret)
+ return -ENODEV;
+
+ nargs = 0;
+ element++;
+
+ /* assume following integer elements are all args */
+ for (i = 0; element + i < end && i < num_args; i++) {
+ int type = element[i].type;
+
+ if (type == ACPI_TYPE_INTEGER)
+ nargs++;
+ else if (type == ACPI_TYPE_LOCAL_REFERENCE)
+ break;
+ else
+ return -EPROTO;
+ }
- if (type == ACPI_TYPE_INTEGER)
- nargs++;
- else if (type == ACPI_TYPE_LOCAL_REFERENCE)
- break;
- else
+ if (nargs > MAX_ACPI_REFERENCE_ARGS)
return -EPROTO;
- }
- if (idx++ == index) {
- args->adev = device;
- args->nargs = nargs;
- for (i = 0; i < nargs; i++)
- args->args[i] = element[i].integer.value;
+ if (idx == index) {
+ args->adev = device;
+ args->nargs = nargs;
+ for (i = 0; i < nargs; i++)
+ args->args[i] = element[i].integer.value;
- return 0;
+ return 0;
+ }
+
+ element += nargs;
+ } else if (element->type == ACPI_TYPE_INTEGER) {
+ if (idx == index)
+ return -ENOENT;
+ element++;
+ } else {
+ return -EPROTO;
}
- element += nargs;
+ idx++;
}
- return -EPROTO;
-}
-
-/**
- * acpi_node_get_property_reference - get a handle to the referenced object.
- * @fwnode: Firmware node to get the property from.
- * @propname: Name of the property.
- * @index: Index of the reference to return.
- * @args: Location to store the returned reference with optional arguments.
- */
-int acpi_node_get_property_reference(struct fwnode_handle *fwnode,
- const char *name, size_t index,
- struct acpi_reference_args *args)
-{
- struct acpi_device_data *data = acpi_device_data_of_node(fwnode);
-
- return data ? acpi_data_get_property_reference(data, name, index, args) : -EINVAL;
+ return -ENODATA;
}
-EXPORT_SYMBOL_GPL(acpi_node_get_property_reference);
+EXPORT_SYMBOL_GPL(__acpi_node_get_property_reference);
static int acpi_data_prop_read_single(struct acpi_device_data *data,
const char *propname,
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c5eaf2f80a4c..54460ad3a7a6 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -927,9 +927,17 @@ struct acpi_reference_args {
#ifdef CONFIG_ACPI
int acpi_dev_get_property(struct acpi_device *adev, const char *name,
acpi_object_type type, const union acpi_object **obj);
-int acpi_node_get_property_reference(struct fwnode_handle *fwnode,
- const char *name, size_t index,
- struct acpi_reference_args *args);
+int __acpi_node_get_property_reference(struct fwnode_handle *fwnode,
+ const char *name, size_t index, size_t num_args,
+ struct acpi_reference_args *args);
+
+static inline int acpi_node_get_property_reference(struct fwnode_handle *fwnode,
+ const char *name, size_t index,
+ struct acpi_reference_args *args)
+{
+ return __acpi_node_get_property_reference(fwnode, name, index,
+ MAX_ACPI_REFERENCE_ARGS, args);
+}
int acpi_node_prop_get(struct fwnode_handle *fwnode, const char *propname,
void **valptr);
@@ -1005,6 +1013,14 @@ static inline int acpi_dev_get_property(struct acpi_device *adev,
return -ENXIO;
}
+static inline int
+__acpi_node_get_property_reference(struct fwnode_handle *fwnode,
+ const char *name, size_t index, size_t num_args,
+ struct acpi_reference_args *args)
+{
+ return -ENXIO;
+}
+
static inline int acpi_node_get_property_reference(struct fwnode_handle *fwnode,
const char *name, size_t index,
struct acpi_reference_args *args)
--
2.9.3
Powered by blists - more mailing lists