[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #131 SMP Fri Sep 30 17:47:43 CEST 2016 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.2 present. [ 0.000000] DMI: VIA Technologies, Inc. VT82C694X/694X, BIOS 6.00 PG 02/19/2002 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C9FFF write-protect [ 0.000000] CA000-EFFFF uncachable [ 0.000000] F0000-F7FFF write-through [ 0.000000] F8000-F8FFF uncachable [ 0.000000] F9000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x016b6000, 0x016b6fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6C00 000014 (v00 VIA694) [ 0.000000] ACPI: RSDT 0x000000001FFF3000 000028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x000000001FFF3040 000074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0x000000001FFF30C0 002587 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x000000001FFF0000 000040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffeffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffeffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff] [ 0.000000] On node 0 totalpages: 130958 [ 0.000000] free_area_init_node: node 0, pgdat c15b13e0, node_mem_map dfbf0020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 126960 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @dfbd9000 s47980 r0 d29844 u77824 [ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda1 ro resume=/dev/sda2 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 512288K/523832K available (3918K kernel code, 435K rwdata, 1520K rodata, 524K init, 412K bss, 11544K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc15c0000 - 0xc1643000 ( 524 kB) .data : 0xc13d3d65 - 0xc15bee20 (1964 kB) .text : 0xc1000000 - 0xc13d3d65 (3919 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1199.463 MHz processor [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2398.92 BogoMIPS (lpj=4797852) [ 0.008103] pid_max: default: 32768 minimum: 301 [ 0.008175] ACPI: Core revision 20160422 [ 0.013495] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.013636] ACPI: setting ELCR to 0400 (from 0e00) [ 0.013751] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.013798] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.014639] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2 [ 0.014709] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.018335] Freeing SMP alternatives memory: 16K (c1643000 - c1647000) [ 0.020475] smpboot: Max logical packages: 1 [ 0.020536] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.020583] smpboot: SMP motherboard not detected [ 0.020625] smpboot: SMP disabled [ 0.020669] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.020717] Performance Events: [ 0.020763] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.020846] no hardware sampling interrupt available. [ 0.020891] p6 PMU driver. [ 0.020940] ... version: 0 [ 0.020982] ... bit width: 32 [ 0.021027] ... generic registers: 2 [ 0.021069] ... value mask: 00000000ffffffff [ 0.021111] ... max period: 000000007fffffff [ 0.021157] ... fixed-purpose events: 0 [ 0.021199] ... event mask: 0000000000000003 [ 0.022236] x86: Booted up 1 node, 1 CPUs [ 0.022307] smpboot: Total of 1 processors activated (2398.92 BogoMIPS) [ 0.022848] devtmpfs: initialized [ 0.024381] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes) [ 0.024628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.024961] NET: Registered protocol family 16 [ 0.025437] cpuidle: using governor ladder [ 0.025486] cpuidle: using governor menu [ 0.025639] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.025704] ACPI: bus type PCI registered [ 0.068892] PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=1 [ 0.068941] PCI: Using configuration type 1 for base access [ 0.072796] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.073288] ACPI: Added _OSI(Module Device) [ 0.073339] ACPI: Added _OSI(Processor Device) [ 0.073386] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073429] ACPI: Added _OSI(Processor Aggregator Device) [ 0.077966] ACPI: Interpreter enabled [ 0.078083] ACPI: (supports S0 S1 S4 S5) [ 0.078131] ACPI: Using PIC for interrupt routing [ 0.078230] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.085722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.085799] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.085854] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.085909] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.086076] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.086081] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.086085] acpi PNP0A03:00: host bridge window [io 0x0d00-0x3fff window] (ignored) [ 0.086089] acpi PNP0A03:00: host bridge window [io 0x4000-0x407f] (ignored) [ 0.086093] acpi PNP0A03:00: host bridge window [io 0x4080-0x40ff] (ignored) [ 0.086097] acpi PNP0A03:00: host bridge window [io 0x4100-0x4fff window] (ignored) [ 0.086101] acpi PNP0A03:00: host bridge window [io 0x5000-0x500f] (ignored) [ 0.086105] acpi PNP0A03:00: host bridge window [io 0x5010-0x5fff window] (ignored) [ 0.086108] acpi PNP0A03:00: host bridge window [io 0x6000-0x607f] (ignored) [ 0.086112] acpi PNP0A03:00: host bridge window [io 0x6080-0xffff window] (ignored) [ 0.086117] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.086121] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored) [ 0.086125] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xffefffff window] (ignored) [ 0.086129] PCI: root bus 00: using default resources [ 0.086246] PCI host bridge to bus 0000:00 [ 0.086296] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.086341] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.086390] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.086458] pci 0000:00:00.0: [1106:0691] type 00 class 0x060000 [ 0.086479] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref] [ 0.086725] pci 0000:00:01.0: [1106:8598] type 01 class 0x060400 [ 0.086777] pci 0000:00:01.0: supports D1 [ 0.086921] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100 [ 0.087186] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a [ 0.087230] pci 0000:00:07.1: reg 0x20: [io 0xd000-0xd00f] [ 0.087251] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.087301] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.087350] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.087395] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.087620] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300 [ 0.087661] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f] [ 0.087786] pci 0000:00:07.2: System wakeup disabled by ACPI [ 0.087945] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300 [ 0.088057] pci 0000:00:07.3: reg 0x20: [io 0xd800-0xd81f] [ 0.088191] pci 0000:00:07.3: System wakeup disabled by ACPI [ 0.088359] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000 [ 0.088423] pci 0000:00:07.4: quirk: [io 0x6000-0x607f] claimed by vt82c686 HW-mon [ 0.088474] pci 0000:00:07.4: quirk: [io 0x5000-0x500f] claimed by vt82c686 SMB [ 0.088700] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100 [ 0.088717] pci 0000:00:07.5: reg 0x10: [io 0xdc00-0xdcff] [ 0.088728] pci 0000:00:07.5: reg 0x14: [io 0xe000-0xe003] [ 0.088739] pci 0000:00:07.5: reg 0x18: [io 0xe400-0xe403] [ 0.088969] pci 0000:00:10.0: [10ec:8139] type 00 class 0x020000 [ 0.088986] pci 0000:00:10.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.088997] pci 0000:00:10.0: reg 0x14: [mem 0xe8000000-0xe80000ff] [ 0.089060] pci 0000:00:10.0: supports D1 D2 [ 0.089065] pci 0000:00:10.0: PME# supported from D1 D2 D3hot [ 0.089309] pci 0000:01:00.0: [10de:002d] type 00 class 0x030000 [ 0.089326] pci 0000:01:00.0: reg 0x10: [mem 0xe6000000-0xe6ffffff] [ 0.089337] pci 0000:01:00.0: reg 0x14: [mem 0xe4000000-0xe5ffffff pref] [ 0.089369] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.089510] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.089566] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xe7ffffff] [ 0.089573] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff pref] [ 0.089584] pci_bus 0000:00: on NUMA node 0 [ 0.089966] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.090712] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.091459] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 [ 0.092291] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.094684] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.094743] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.094790] vgaarb: loaded [ 0.094834] vgaarb: bridge control possible 0000:01:00.0 [ 0.095102] SCSI subsystem initialized [ 0.095307] libata version 3.00 loaded. [ 0.095321] ACPI: bus type USB registered [ 0.095441] usbcore: registered new interface driver usbfs [ 0.095517] usbcore: registered new interface driver hub [ 0.095595] usbcore: registered new device driver usb [ 0.095719] PCI: Using ACPI for IRQ routing [ 0.095776] PCI: pci_cache_line_size set to 32 bytes [ 0.095822] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.095827] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff] [ 0.096886] clocksource: Switched to clocksource pit [ 0.116708] pnp: PnP ACPI init [ 0.117606] system 00:00: [mem 0x000ca800-0x000cbfff] has been reserved [ 0.117669] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.117718] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.117766] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.117814] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved [ 0.117862] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 0.117909] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.117956] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved [ 0.118004] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.118063] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.118517] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.118572] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.118666] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.118927] pnp 00:03: [dma 2] [ 0.119028] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.120141] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.120254] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.120306] pnp: PnP ACPI: found 6 devices [ 0.120367] PnPBIOS: Disabled [ 0.160106] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.161358] clocksource: Switched to clocksource acpi_pm [ 0.161467] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe700ffff pref] [ 0.161526] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.161578] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xe7ffffff] [ 0.161626] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff pref] [ 0.161686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.161691] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.161696] pci_bus 0000:01: resource 1 [mem 0xe6000000-0xe7ffffff] [ 0.161700] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xe5ffffff pref] [ 0.161809] NET: Registered protocol family 2 [ 0.162383] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.162502] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.162664] TCP: Hash tables configured (established 4096 bind 4096) [ 0.162795] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.162876] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.163267] NET: Registered protocol family 1 [ 0.163390] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.163443] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.164594] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.164645] PCI: setting IRQ 11 as level-triggered [ 0.165178] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.165233] PCI: CLS 32 bytes, default 32 [ 0.166618] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.167702] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.176200] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.176276] io scheduler noop registered [ 0.176319] io scheduler deadline registered [ 0.176472] io scheduler cfq registered (default) [ 0.177199] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.177264] ACPI: Power Button [PWRB] [ 0.177472] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.177525] ACPI: Sleep Button [SLPB] [ 0.177718] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.177775] ACPI: Power Button [PWRF] [ 0.177959] tsc: Marking TSC unstable due to TSC halts in idle [ 0.178166] Warning: Processor Platform Limit event detected, but not handled. [ 0.178219] Consider compiling CPUfreq support into your kernel. [ 0.178894] isapnp: Scanning for PnP cards... [ 0.265526] 01:01: card 'SYM 53C416' [ 0.265573] isapnp: 1 Plug & Play card detected total [ 0.265801] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.267083] Non-volatile memory driver v1.3 [ 0.267138] Linux agpgart interface v0.103 [ 0.267247] [drm] Initialized drm 1.1.0 20060810 [ 0.275011] loop: module loaded [ 0.275365] pata_via 0000:00:07.1: version 0.3.4 [ 0.276741] scsi host0: pata_via [ 0.277152] scsi host1: pata_via [ 0.277354] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 0.277403] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 0.277628] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.277680] 8139cp 0000:00:10.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 0.277792] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.278847] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.279601] 8139too 0000:00:10.0 eth0: RealTek RTL8139 at 0x0001e800, 00:40:95:30:81:14, IRQ 11 [ 0.279704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.279750] ehci-pci: EHCI PCI platform driver [ 0.279840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.279917] ohci-pci: OHCI PCI platform driver [ 0.279987] uhci_hcd: USB Universal Host Controller Interface driver [ 0.280773] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.280844] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.280946] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400 [ 0.281611] hub 1-0:1.0: USB hub found [ 0.281680] hub 1-0:1.0: 2 ports detected [ 0.282265] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 0.282337] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 0.282423] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800 [ 0.283037] hub 2-0:1.0: USB hub found [ 0.283105] hub 2-0:1.0: 2 ports detected [ 0.283579] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.284268] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.284327] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.284810] mousedev: PS/2 mouse device common for all mice [ 0.285780] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.285881] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram [ 0.286418] NET: Registered protocol family 17 [ 0.286626] Using IPI No-Shortcut mode [ 0.287084] registered taskstats version 1 [ 0.287818] console [netcon0] enabled [ 0.287870] netconsole: network logging started [ 0.287991] rtc_cmos 00:02: setting system clock to 2016-09-30 15:52:41 UTC (1475250761) [ 0.288212] PM: Checking hibernation image partition /dev/sda2 [ 0.311925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.502849] ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100 [ 0.502909] ata1.00: 156301488 sectors, multi 16: LBA [ 0.505829] ata1.00: configured for UDMA/100 [ 0.506349] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00FM 3G13 PQ: 0 ANSI: 5 [ 0.507365] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.507583] sd 0:0:0:0: [sda] Write Protect is off [ 0.507631] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.507689] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.557652] sda: sda1 sda2 sda3 [ 0.558774] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.184052] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x114a205d4d6, max_idle_ns: 440795204040 ns [ 1.227921] random: fast init done [ 1.741876] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.744824] PM: Hibernation image partition 8:2 present [ 1.744826] PM: Looking for hibernation image. [ 1.745352] PM: Image not found (code -22) [ 1.745356] PM: Hibernation image not present or could not be loaded. [ 1.745942] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 1.785224] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.785348] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 1.786842] Freeing unused kernel memory: 524K (c15c0000 - c1643000) [ 1.787199] Write protecting the kernel text: 3920k [ 1.787323] Write protecting the kernel read-only data: 1528k [ 4.650945] random: crng init done [ 4.963723] systemd-udevd[179]: starting version 215 [ 6.855788] agpgart: Detected VIA Apollo Pro 133 chipset [ 6.870355] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 7.092113] wmi: Mapper loaded [ 7.177739] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.217611] parport_pc: VIA 686A/8231 detected [ 7.217618] parport_pc: probing current configuration [ 7.217637] parport_pc: Current parallel port base: 0x0 [ 7.217640] parport_pc: VIA parallel port disabled in BIOS [ 7.411060] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 7.411129] PCI: setting IRQ 10 as level-triggered [ 7.411540] nouveau 0000:01:00.0: NVIDIA NV05 (20154000) [ 7.462262] nouveau 0000:01:00.0: bios: version 02.05.20.02.00 [ 7.557840] nouveau 0000:01:00.0: bios: DCB table not found [ 7.558071] nouveau 0000:01:00.0: bios: DCB table not found [ 7.558186] nouveau 0000:01:00.0: bios: DCB table not found [ 7.558233] nouveau 0000:01:00.0: bios: DCB table not found [ 7.558316] nouveau 0000:01:00.0: bios: DCB table not found [ 7.565103] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 7.565190] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 7.565266] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 7.565351] nouveau 0000:01:00.0: tmr: unknown input clock freq [ 7.567618] nouveau 0000:01:00.0: fb: 32 MiB SDRAM [ 7.582871] [TTM] Zone kernel: Available graphics memory: 256414 kiB [ 7.582938] [TTM] Initializing pool allocator [ 7.583369] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB [ 7.583435] nouveau 0000:01:00.0: DRM: GART: 64 MiB [ 7.583485] nouveau 0000:01:00.0: DRM: BMP version 5.6 [ 7.583533] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS [ 7.586669] nouveau 0000:01:00.0: DRM: Saving VGA fonts [ 7.618355] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS [ 7.619748] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.619814] [drm] Driver supports precise vblank timestamp query. [ 7.625009] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 7.656497] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo dd6e4000 [ 7.657051] fbcon: nouveaufb (fb0) is primary device [ 7.843721] Console: switching to colour frame buffer device 160x64 [ 7.845996] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 7.847022] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 9.639713] EXT4-fs (sda1): re-mounted. Opts: (null) [ 10.309077] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.949970] i2c /dev entries driver [ 17.236428] 8139too 0000:00:10.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000