| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1475510655-12729-3-git-send-email-sergio.paracuellos@gmail.com>
Date: Mon, 3 Oct 2016 18:04:02 +0200
From: Sergio Paracuellos <sergio.paracuellos@...il.com>
To: gregkh@...uxfoundation.org
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH 02/15] staging: wlang-ng: fix block comment warnings in hfa384x_usb.c
This patch fix the following checkpatch.pl warnings in hfa384x_usb.c:
WARNING: Block comments should align the * on each line
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
---
drivers/staging/wlan-ng/hfa384x_usb.c | 2370 +++++++++++++++++----------------
1 file changed, 1213 insertions(+), 1157 deletions(-)
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 395690f..1bfea8d 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -1,114 +1,114 @@
/* src/prism2/driver/hfa384x_usb.c
-*
-* Functions that talk to the USB variantof the Intersil hfa384x MAC
-*
-* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
-* --------------------------------------------------------------------
-*
-* linux-wlan
-*
-* The contents of this file are subject to the Mozilla Public
-* License Version 1.1 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.mozilla.org/MPL/
-*
-* Software distributed under the License is distributed on an "AS
-* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* Alternatively, the contents of this file may be used under the
-* terms of the GNU Public License version 2 (the "GPL"), in which
-* case the provisions of the GPL are applicable instead of the
-* above. If you wish to allow the use of your version of this file
-* only under the terms of the GPL and not to allow others to use
-* your version of this file under the MPL, indicate your decision
-* by deleting the provisions above and replace them with the notice
-* and other provisions required by the GPL. If you do not delete
-* the provisions above, a recipient may use your version of this
-* file under either the MPL or the GPL.
-*
-* --------------------------------------------------------------------
-*
-* Inquiries regarding the linux-wlan Open Source project can be
-* made directly to:
-*
-* AbsoluteValue Systems Inc.
-* info@...ux-wlan.com
-* http://www.linux-wlan.com
-*
-* --------------------------------------------------------------------
-*
-* Portions of the development of this software were funded by
-* Intersil Corporation as part of PRISM(R) chipset product development.
-*
-* --------------------------------------------------------------------
-*
-* This file implements functions that correspond to the prism2/hfa384x
-* 802.11 MAC hardware and firmware host interface.
-*
-* The functions can be considered to represent several levels of
-* abstraction. The lowest level functions are simply C-callable wrappers
-* around the register accesses. The next higher level represents C-callable
-* prism2 API functions that match the Intersil documentation as closely
-* as is reasonable. The next higher layer implements common sequences
-* of invocations of the API layer (e.g. write to bap, followed by cmd).
-*
-* Common sequences:
-* hfa384x_drvr_xxx Highest level abstractions provided by the
-* hfa384x code. They are driver defined wrappers
-* for common sequences. These functions generally
-* use the services of the lower levels.
-*
-* hfa384x_drvr_xxxconfig An example of the drvr level abstraction. These
-* functions are wrappers for the RID get/set
-* sequence. They call copy_[to|from]_bap() and
-* cmd_access(). These functions operate on the
-* RIDs and buffers without validation. The caller
-* is responsible for that.
-*
-* API wrapper functions:
-* hfa384x_cmd_xxx functions that provide access to the f/w commands.
-* The function arguments correspond to each command
-* argument, even command arguments that get packed
-* into single registers. These functions _just_
-* issue the command by setting the cmd/parm regs
-* & reading the status/resp regs. Additional
-* activities required to fully use a command
-* (read/write from/to bap, get/set int status etc.)
-* are implemented separately. Think of these as
-* C-callable prism2 commands.
-*
-* Lowest Layer Functions:
-* hfa384x_docmd_xxx These functions implement the sequence required
-* to issue any prism2 command. Primarily used by the
-* hfa384x_cmd_xxx functions.
-*
-* hfa384x_bap_xxx BAP read/write access functions.
-* Note: we usually use BAP0 for non-interrupt context
-* and BAP1 for interrupt context.
-*
-* hfa384x_dl_xxx download related functions.
-*
-* Driver State Issues:
-* Note that there are two pairs of functions that manage the
-* 'initialized' and 'running' states of the hw/MAC combo. The four
-* functions are create(), destroy(), start(), and stop(). create()
-* sets up the data structures required to support the hfa384x_*
-* functions and destroy() cleans them up. The start() function gets
-* the actual hardware running and enables the interrupts. The stop()
-* function shuts the hardware down. The sequence should be:
-* create()
-* start()
-* .
-* . Do interesting things w/ the hardware
-* .
-* stop()
-* destroy()
-*
-* Note that destroy() can be called without calling stop() first.
-* --------------------------------------------------------------------
-*/
+ *
+ * Functions that talk to the USB variantof the Intersil hfa384x MAC
+ *
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ * --------------------------------------------------------------------
+ *
+ * linux-wlan
+ *
+ * The contents of this file are subject to the Mozilla Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License version 2 (the "GPL"), in which
+ * case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision
+ * by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL. If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the MPL or the GPL.
+ *
+ * --------------------------------------------------------------------
+ *
+ * Inquiries regarding the linux-wlan Open Source project can be
+ * made directly to:
+ *
+ * AbsoluteValue Systems Inc.
+ * info@...ux-wlan.com
+ * http://www.linux-wlan.com
+ *
+ * --------------------------------------------------------------------
+ *
+ * Portions of the development of this software were funded by
+ * Intersil Corporation as part of PRISM(R) chipset product development.
+ *
+ * --------------------------------------------------------------------
+ *
+ * This file implements functions that correspond to the prism2/hfa384x
+ * 802.11 MAC hardware and firmware host interface.
+ *
+ * The functions can be considered to represent several levels of
+ * abstraction. The lowest level functions are simply C-callable wrappers
+ * around the register accesses. The next higher level represents C-callable
+ * prism2 API functions that match the Intersil documentation as closely
+ * as is reasonable. The next higher layer implements common sequences
+ * of invocations of the API layer (e.g. write to bap, followed by cmd).
+ *
+ * Common sequences:
+ * hfa384x_drvr_xxx Highest level abstractions provided by the
+ * hfa384x code. They are driver defined wrappers
+ * for common sequences. These functions generally
+ * use the services of the lower levels.
+ *
+ * hfa384x_drvr_xxxconfig An example of the drvr level abstraction. These
+ * functions are wrappers for the RID get/set
+ * sequence. They call copy_[to|from]_bap() and
+ * cmd_access(). These functions operate on the
+ * RIDs and buffers without validation. The caller
+ * is responsible for that.
+ *
+ * API wrapper functions:
+ * hfa384x_cmd_xxx functions that provide access to the f/w commands.
+ * The function arguments correspond to each command
+ * argument, even command arguments that get packed
+ * into single registers. These functions _just_
+ * issue the command by setting the cmd/parm regs
+ * & reading the status/resp regs. Additional
+ * activities required to fully use a command
+ * (read/write from/to bap, get/set int status etc.)
+ * are implemented separately. Think of these as
+ * C-callable prism2 commands.
+ *
+ * Lowest Layer Functions:
+ * hfa384x_docmd_xxx These functions implement the sequence required
+ * to issue any prism2 command. Primarily used by the
+ * hfa384x_cmd_xxx functions.
+ *
+ * hfa384x_bap_xxx BAP read/write access functions.
+ * Note: we usually use BAP0 for non-interrupt context
+ * and BAP1 for interrupt context.
+ *
+ * hfa384x_dl_xxx download related functions.
+ *
+ * Driver State Issues:
+ * Note that there are two pairs of functions that manage the
+ * 'initialized' and 'running' states of the hw/MAC combo. The four
+ * functions are create(), destroy(), start(), and stop(). create()
+ * sets up the data structures required to support the hfa384x_*
+ * functions and destroy() cleans them up. The start() function gets
+ * the actual hardware running and enables the interrupts. The stop()
+ * function shuts the hardware down. The sequence should be:
+ * create()
+ * start()
+ * .
+ * . Do interesting things w/ the hardware
+ * .
+ * stop()
+ * destroy()
+ *
+ * Note that destroy() can be called without calling stop() first.
+ * --------------------------------------------------------------------
+ */
#include <linux/module.h>
#include <linux/kernel.h>
@@ -311,21 +311,22 @@ void dbprint_urb(struct urb *urb)
#endif
/*----------------------------------------------------------------
-* submit_rx_urb
-*
-* Listen for input data on the BULK-IN pipe. If the pipe has
-* stalled then schedule it to be reset.
-*
-* Arguments:
-* hw device struct
-* memflags memory allocation flags
-*
-* Returns:
-* error code from submission
-*
-* Call context:
-* Any
-----------------------------------------------------------------*/
+ * submit_rx_urb
+ *
+ * Listen for input data on the BULK-IN pipe. If the pipe has
+ * stalled then schedule it to be reset.
+ *
+ * Arguments:
+ * hw device struct
+ * memflags memory allocation flags
+ *
+ * Returns:
+ * error code from submission
+ *
+ * Call context:
+ * Any
+ *----------------------------------------------------------------
+ */
static int submit_rx_urb(struct hfa384x *hw, gfp_t memflags)
{
struct sk_buff *skb;
@@ -371,23 +372,24 @@ static int submit_rx_urb(struct hfa384x *hw, gfp_t memflags)
}
/*----------------------------------------------------------------
-* submit_tx_urb
-*
-* Prepares and submits the URB of transmitted data. If the
-* submission fails then it will schedule the output pipe to
-* be reset.
-*
-* Arguments:
-* hw device struct
-* tx_urb URB of data for transmission
-* memflags memory allocation flags
-*
-* Returns:
-* error code from submission
-*
-* Call context:
-* Any
-----------------------------------------------------------------*/
+ * submit_tx_urb
+ *
+ * Prepares and submits the URB of transmitted data. If the
+ * submission fails then it will schedule the output pipe to
+ * be reset.
+ *
+ * Arguments:
+ * hw device struct
+ * tx_urb URB of data for transmission
+ * memflags memory allocation flags
+ *
+ * Returns:
+ * error code from submission
+ *
+ * Call context:
+ * Any
+ *----------------------------------------------------------------
+ */
static int submit_tx_urb(struct hfa384x *hw, struct urb *tx_urb, gfp_t memflags)
{
struct net_device *netdev = hw->wlandev->netdev;
@@ -416,21 +418,22 @@ static int submit_tx_urb(struct hfa384x *hw, struct urb *tx_urb, gfp_t memflags)
}
/*----------------------------------------------------------------
-* hfa394x_usb_defer
-*
-* There are some things that the USB stack cannot do while
-* in interrupt context, so we arrange this function to run
-* in process context.
-*
-* Arguments:
-* hw device structure
-*
-* Returns:
-* nothing
-*
-* Call context:
-* process (by design)
-----------------------------------------------------------------*/
+ * hfa394x_usb_defer
+ *
+ * There are some things that the USB stack cannot do while
+ * in interrupt context, so we arrange this function to run
+ * in process context.
+ *
+ * Arguments:
+ * hw device structure
+ *
+ * Returns:
+ * nothing
+ *
+ * Call context:
+ * process (by design)
+ *----------------------------------------------------------------
+ */
static void hfa384x_usb_defer(struct work_struct *data)
{
struct hfa384x *hw = container_of(data, struct hfa384x, usb_work);
@@ -505,26 +508,27 @@ static void hfa384x_usb_defer(struct work_struct *data)
}
/*----------------------------------------------------------------
-* hfa384x_create
-*
-* Sets up the struct hfa384x data structure for use. Note this
-* does _not_ initialize the actual hardware, just the data structures
-* we use to keep track of its state.
-*
-* Arguments:
-* hw device structure
-* irq device irq number
-* iobase i/o base address for register access
-* membase memory base address for register access
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_create
+ *
+ * Sets up the struct hfa384x data structure for use. Note this
+ * does _not_ initialize the actual hardware, just the data structures
+ * we use to keep track of its state.
+ *
+ * Arguments:
+ * hw device structure
+ * irq device irq number
+ * iobase i/o base address for register access
+ * membase memory base address for register access
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
void hfa384x_create(struct hfa384x *hw, struct usb_device *usb)
{
memset(hw, 0, sizeof(struct hfa384x));
@@ -575,27 +579,28 @@ void hfa384x_create(struct hfa384x *hw, struct usb_device *usb)
}
/*----------------------------------------------------------------
-* hfa384x_destroy
-*
-* Partner to hfa384x_create(). This function cleans up the hw
-* structure so that it can be freed by the caller using a simple
-* kfree. Currently, this function is just a placeholder. If, at some
-* point in the future, an hw in the 'shutdown' state requires a 'deep'
-* kfree, this is where it should be done. Note that if this function
-* is called on a _running_ hw structure, the drvr_stop() function is
-* called.
-*
-* Arguments:
-* hw device structure
-*
-* Returns:
-* nothing, this function is not allowed to fail.
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_destroy
+ *
+ * Partner to hfa384x_create(). This function cleans up the hw
+ * structure so that it can be freed by the caller using a simple
+ * kfree. Currently, this function is just a placeholder. If, at some
+ * point in the future, an hw in the 'shutdown' state requires a 'deep'
+ * kfree, this is where it should be done. Note that if this function
+ * is called on a _running_ hw structure, the drvr_stop() function is
+ * called.
+ *
+ * Arguments:
+ * hw device structure
+ *
+ * Returns:
+ * nothing, this function is not allowed to fail.
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
void hfa384x_destroy(struct hfa384x *hw)
{
struct sk_buff *skb;
@@ -649,10 +654,11 @@ static struct hfa384x_usbctlx *usbctlx_alloc(void)
}
/*----------------------------------------------------------------
-* Completor object:
-* This completor must be passed to hfa384x_usbctlx_complete_sync()
-* when processing a CTLX that returns a struct hfa384x_cmdresult structure.
-----------------------------------------------------------------*/
+ * Completor object:
+ * This completor must be passed to hfa384x_usbctlx_complete_sync()
+ * when processing a CTLX that returns a struct hfa384x_cmdresult structure.
+ *----------------------------------------------------------------
+ */
struct usbctlx_cmd_completor {
struct usbctlx_completor head;
@@ -680,10 +686,11 @@ static inline int usbctlx_cmd_completor_fn(struct usbctlx_completor *head)
}
/*----------------------------------------------------------------
-* Completor object:
-* This completor must be passed to hfa384x_usbctlx_complete_sync()
-* when processing a CTLX that reads a RID.
-----------------------------------------------------------------*/
+ * Completor object:
+ * This completor must be passed to hfa384x_usbctlx_complete_sync()
+ * when processing a CTLX that reads a RID.
+ *----------------------------------------------------------------
+ */
struct usbctlx_rrid_completor {
struct usbctlx_completor head;
@@ -726,21 +733,24 @@ static int usbctlx_rrid_completor_fn(struct usbctlx_completor *head)
}
/*----------------------------------------------------------------
-* Completor object:
-* Interprets the results of a synchronous RID-write
-----------------------------------------------------------------*/
+ * Completor object:
+ * Interprets the results of a synchronous RID-write
+ *----------------------------------------------------------------
+ */
#define init_wrid_completor init_cmd_completor
/*----------------------------------------------------------------
-* Completor object:
-* Interprets the results of a synchronous memory-write
-----------------------------------------------------------------*/
+ * Completor object:
+ * Interprets the results of a synchronous memory-write
+ *----------------------------------------------------------------
+ */
#define init_wmem_completor init_cmd_completor
/*----------------------------------------------------------------
-* Completor object:
-* Interprets the results of a synchronous memory-read
-----------------------------------------------------------------*/
+ * Completor object:
+ * Interprets the results of a synchronous memory-read
+ *----------------------------------------------------------------
+ */
struct usbctlx_rmem_completor {
struct usbctlx_completor head;
@@ -773,26 +783,27 @@ static int usbctlx_rmem_completor_fn(struct usbctlx_completor *head)
}
/*----------------------------------------------------------------
-* hfa384x_cb_status
-*
-* Ctlx_complete handler for async CMD type control exchanges.
-* mark the hw struct as such.
-*
-* Note: If the handling is changed here, it should probably be
-* changed in docmd as well.
-*
-* Arguments:
-* hw hw struct
-* ctlx completed CTLX
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_cb_status
+ *
+ * Ctlx_complete handler for async CMD type control exchanges.
+ * mark the hw struct as such.
+ *
+ * Note: If the handling is changed here, it should probably be
+ * changed in docmd as well.
+ *
+ * Arguments:
+ * hw hw struct
+ * ctlx completed CTLX
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_cb_status(struct hfa384x *hw,
const struct hfa384x_usbctlx *ctlx)
{
@@ -905,24 +916,25 @@ static inline int hfa384x_docmd_wait(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_cmd_initialize
-*
-* Issues the initialize command and sets the hw->state based
-* on the result.
-*
-* Arguments:
-* hw device structure
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_cmd_initialize
+ *
+ * Issues the initialize command and sets the hw->state based
+ * on the result.
+ *
+ * Arguments:
+ * hw device structure
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_cmd_initialize(struct hfa384x *hw)
{
int result = 0;
@@ -950,25 +962,26 @@ int hfa384x_cmd_initialize(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_cmd_disable
-*
-* Issues the disable command to stop communications on one of
-* the MACs 'ports'.
-*
-* Arguments:
-* hw device structure
-* macport MAC port number (host order)
-*
-* Returns:
-* 0 success
-* >0 f/w reported failure - f/w status code
-* <0 driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_cmd_disable
+ *
+ * Issues the disable command to stop communications on one of
+ * the MACs 'ports'.
+ *
+ * Arguments:
+ * hw device structure
+ * macport MAC port number (host order)
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported failure - f/w status code
+ * <0 driver reported error (timeout|bad arg)
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_cmd_disable(struct hfa384x *hw, u16 macport)
{
struct hfa384x_metacmd cmd;
@@ -983,25 +996,26 @@ int hfa384x_cmd_disable(struct hfa384x *hw, u16 macport)
}
/*----------------------------------------------------------------
-* hfa384x_cmd_enable
-*
-* Issues the enable command to enable communications on one of
-* the MACs 'ports'.
-*
-* Arguments:
-* hw device structure
-* macport MAC port number
-*
-* Returns:
-* 0 success
-* >0 f/w reported failure - f/w status code
-* <0 driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_cmd_enable
+ *
+ * Issues the enable command to enable communications on one of
+ * the MACs 'ports'.
+ *
+ * Arguments:
+ * hw device structure
+ * macport MAC port number
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported failure - f/w status code
+ * <0 driver reported error (timeout|bad arg)
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_cmd_enable(struct hfa384x *hw, u16 macport)
{
struct hfa384x_metacmd cmd;
@@ -1016,34 +1030,35 @@ int hfa384x_cmd_enable(struct hfa384x *hw, u16 macport)
}
/*----------------------------------------------------------------
-* hfa384x_cmd_monitor
-*
-* Enables the 'monitor mode' of the MAC. Here's the description of
-* monitor mode that I've received thus far:
-*
-* "The "monitor mode" of operation is that the MAC passes all
-* frames for which the PLCP checks are correct. All received
-* MPDUs are passed to the host with MAC Port = 7, with a
-* receive status of good, FCS error, or undecryptable. Passing
-* certain MPDUs is a violation of the 802.11 standard, but useful
-* for a debugging tool." Normal communication is not possible
-* while monitor mode is enabled.
-*
-* Arguments:
-* hw device structure
-* enable a code (0x0b|0x0f) that enables/disables
-* monitor mode. (host order)
-*
-* Returns:
-* 0 success
-* >0 f/w reported failure - f/w status code
-* <0 driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_cmd_monitor
+ *
+ * Enables the 'monitor mode' of the MAC. Here's the description of
+ * monitor mode that I've received thus far:
+ *
+ * "The "monitor mode" of operation is that the MAC passes all
+ * frames for which the PLCP checks are correct. All received
+ * MPDUs are passed to the host with MAC Port = 7, with a
+ * receive status of good, FCS error, or undecryptable. Passing
+ * certain MPDUs is a violation of the 802.11 standard, but useful
+ * for a debugging tool." Normal communication is not possible
+ * while monitor mode is enabled.
+ *
+ * Arguments:
+ * hw device structure
+ * enable a code (0x0b|0x0f) that enables/disables
+ * monitor mode. (host order)
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported failure - f/w status code
+ * <0 driver reported error (timeout|bad arg)
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_cmd_monitor(struct hfa384x *hw, u16 enable)
{
struct hfa384x_metacmd cmd;
@@ -1058,43 +1073,44 @@ int hfa384x_cmd_monitor(struct hfa384x *hw, u16 enable)
}
/*----------------------------------------------------------------
-* hfa384x_cmd_download
-*
-* Sets the controls for the MAC controller code/data download
-* process. The arguments set the mode and address associated
-* with a download. Note that the aux registers should be enabled
-* prior to setting one of the download enable modes.
-*
-* Arguments:
-* hw device structure
-* mode 0 - Disable programming and begin code exec
-* 1 - Enable volatile mem programming
-* 2 - Enable non-volatile mem programming
-* 3 - Program non-volatile section from NV download
-* buffer.
-* (host order)
-* lowaddr
-* highaddr For mode 1, sets the high & low order bits of
-* the "destination address". This address will be
-* the execution start address when download is
-* subsequently disabled.
-* For mode 2, sets the high & low order bits of
-* the destination in NV ram.
-* For modes 0 & 3, should be zero. (host order)
-* NOTE: these are CMD format.
-* codelen Length of the data to write in mode 2,
-* zero otherwise. (host order)
-*
-* Returns:
-* 0 success
-* >0 f/w reported failure - f/w status code
-* <0 driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_cmd_download
+ *
+ * Sets the controls for the MAC controller code/data download
+ * process. The arguments set the mode and address associated
+ * with a download. Note that the aux registers should be enabled
+ * prior to setting one of the download enable modes.
+ *
+ * Arguments:
+ * hw device structure
+ * mode 0 - Disable programming and begin code exec
+ * 1 - Enable volatile mem programming
+ * 2 - Enable non-volatile mem programming
+ * 3 - Program non-volatile section from NV download
+ * buffer.
+ * (host order)
+ * lowaddr
+ * highaddr For mode 1, sets the high & low order bits of
+ * the "destination address". This address will be
+ * the execution start address when download is
+ * subsequently disabled.
+ * For mode 2, sets the high & low order bits of
+ * the destination in NV ram.
+ * For modes 0 & 3, should be zero. (host order)
+ * NOTE: these are CMD format.
+ * codelen Length of the data to write in mode 2,
+ * zero otherwise. (host order)
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported failure - f/w status code
+ * <0 driver reported error (timeout|bad arg)
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_cmd_download(struct hfa384x *hw, u16 mode, u16 lowaddr,
u16 highaddr, u16 codelen)
{
@@ -1114,28 +1130,29 @@ int hfa384x_cmd_download(struct hfa384x *hw, u16 mode, u16 lowaddr,
}
/*----------------------------------------------------------------
-* hfa384x_corereset
-*
-* Perform a reset of the hfa38xx MAC core. We assume that the hw
-* structure is in its "created" state. That is, it is initialized
-* with proper values. Note that if a reset is done after the
-* device has been active for awhile, the caller might have to clean
-* up some leftover cruft in the hw structure.
-*
-* Arguments:
-* hw device structure
-* holdtime how long (in ms) to hold the reset
-* settletime how long (in ms) to wait after releasing
-* the reset
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_corereset
+ *
+ * Perform a reset of the hfa38xx MAC core. We assume that the hw
+ * structure is in its "created" state. That is, it is initialized
+ * with proper values. Note that if a reset is done after the
+ * device has been active for awhile, the caller might have to clean
+ * up some leftover cruft in the hw structure.
+ *
+ * Arguments:
+ * hw device structure
+ * holdtime how long (in ms) to hold the reset
+ * settletime how long (in ms) to wait after releasing
+ * the reset
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_corereset(struct hfa384x *hw, int holdtime,
int settletime, int genesis)
{
@@ -1151,29 +1168,30 @@ int hfa384x_corereset(struct hfa384x *hw, int holdtime,
}
/*----------------------------------------------------------------
-* hfa384x_usbctlx_complete_sync
-*
-* Waits for a synchronous CTLX object to complete,
-* and then handles the response.
-*
-* Arguments:
-* hw device structure
-* ctlx CTLX ptr
-* completor functor object to decide what to
-* do with the CTLX's result.
-*
-* Returns:
-* 0 Success
-* -ERESTARTSYS Interrupted by a signal
-* -EIO CTLX failed
-* -ENODEV Adapter was unplugged
-* ??? Result from completor
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_usbctlx_complete_sync
+ *
+ * Waits for a synchronous CTLX object to complete,
+ * and then handles the response.
+ *
+ * Arguments:
+ * hw device structure
+ * ctlx CTLX ptr
+ * completor functor object to decide what to
+ * do with the CTLX's result.
+ *
+ * Returns:
+ * 0 Success
+ * -ERESTARTSYS Interrupted by a signal
+ * -EIO CTLX failed
+ * -ENODEV Adapter was unplugged
+ * ??? Result from completor
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
struct hfa384x_usbctlx *ctlx,
struct usbctlx_completor *completor)
@@ -1258,37 +1276,38 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_docmd
-*
-* Constructs a command CTLX and submits it.
-*
-* NOTE: Any changes to the 'post-submit' code in this function
-* need to be carried over to hfa384x_cbcmd() since the handling
-* is virtually identical.
-*
-* Arguments:
-* hw device structure
-* mode DOWAIT or DOASYNC
-* cmd cmd structure. Includes all arguments and result
-* data points. All in host order. in host order
-* cmdcb command-specific callback
-* usercb user callback for async calls, NULL for DOWAIT calls
-* usercb_data user supplied data pointer for async calls, NULL
-* for DOASYNC calls
-*
-* Returns:
-* 0 success
-* -EIO CTLX failure
-* -ERESTARTSYS Awakened on signal
-* >0 command indicated error, Status and Resp0-2 are
-* in hw structure.
-*
-* Side effects:
-*
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_docmd
+ *
+ * Constructs a command CTLX and submits it.
+ *
+ * NOTE: Any changes to the 'post-submit' code in this function
+ * need to be carried over to hfa384x_cbcmd() since the handling
+ * is virtually identical.
+ *
+ * Arguments:
+ * hw device structure
+ * mode DOWAIT or DOASYNC
+ * cmd cmd structure. Includes all arguments and result
+ * data points. All in host order. in host order
+ * cmdcb command-specific callback
+ * usercb user callback for async calls, NULL for DOWAIT calls
+ * usercb_data user supplied data pointer for async calls, NULL
+ * for DOASYNC calls
+ *
+ * Returns:
+ * 0 success
+ * -EIO CTLX failure
+ * -ERESTARTSYS Awakened on signal
+ * >0 command indicated error, Status and Resp0-2 are
+ * in hw structure.
+ *
+ * Side effects:
+ *
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
static int
hfa384x_docmd(struct hfa384x *hw,
enum cmd_mode mode,
@@ -1342,41 +1361,42 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_dorrid
-*
-* Constructs a read rid CTLX and issues it.
-*
-* NOTE: Any changes to the 'post-submit' code in this function
-* need to be carried over to hfa384x_cbrrid() since the handling
-* is virtually identical.
-*
-* Arguments:
-* hw device structure
-* mode DOWAIT or DOASYNC
-* rid Read RID number (host order)
-* riddata Caller supplied buffer that MAC formatted RID.data
-* record will be written to for DOWAIT calls. Should
-* be NULL for DOASYNC calls.
-* riddatalen Buffer length for DOWAIT calls. Zero for DOASYNC calls.
-* cmdcb command callback for async calls, NULL for DOWAIT calls
-* usercb user callback for async calls, NULL for DOWAIT calls
-* usercb_data user supplied data pointer for async calls, NULL
-* for DOWAIT calls
-*
-* Returns:
-* 0 success
-* -EIO CTLX failure
-* -ERESTARTSYS Awakened on signal
-* -ENODATA riddatalen != macdatalen
-* >0 command indicated error, Status and Resp0-2 are
-* in hw structure.
-*
-* Side effects:
-*
-* Call context:
-* interrupt (DOASYNC)
-* process (DOWAIT or DOASYNC)
-----------------------------------------------------------------*/
+ * hfa384x_dorrid
+ *
+ * Constructs a read rid CTLX and issues it.
+ *
+ * NOTE: Any changes to the 'post-submit' code in this function
+ * need to be carried over to hfa384x_cbrrid() since the handling
+ * is virtually identical.
+ *
+ * Arguments:
+ * hw device structure
+ * mode DOWAIT or DOASYNC
+ * rid Read RID number (host order)
+ * riddata Caller supplied buffer that MAC formatted RID.data
+ * record will be written to for DOWAIT calls. Should
+ * be NULL for DOASYNC calls.
+ * riddatalen Buffer length for DOWAIT calls. Zero for DOASYNC calls.
+ * cmdcb command callback for async calls, NULL for DOWAIT calls
+ * usercb user callback for async calls, NULL for DOWAIT calls
+ * usercb_data user supplied data pointer for async calls, NULL
+ * for DOWAIT calls
+ *
+ * Returns:
+ * 0 success
+ * -EIO CTLX failure
+ * -ERESTARTSYS Awakened on signal
+ * -ENODATA riddatalen != macdatalen
+ * >0 command indicated error, Status and Resp0-2 are
+ * in hw structure.
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt (DOASYNC)
+ * process (DOWAIT or DOASYNC)
+ *----------------------------------------------------------------
+ */
static int
hfa384x_dorrid(struct hfa384x *hw,
enum cmd_mode mode,
@@ -1427,37 +1447,38 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_dowrid
-*
-* Constructs a write rid CTLX and issues it.
-*
-* NOTE: Any changes to the 'post-submit' code in this function
-* need to be carried over to hfa384x_cbwrid() since the handling
-* is virtually identical.
-*
-* Arguments:
-* hw device structure
-* enum cmd_mode DOWAIT or DOASYNC
-* rid RID code
-* riddata Data portion of RID formatted for MAC
-* riddatalen Length of the data portion in bytes
-* cmdcb command callback for async calls, NULL for DOWAIT calls
-* usercb user callback for async calls, NULL for DOWAIT calls
-* usercb_data user supplied data pointer for async calls
-*
-* Returns:
-* 0 success
-* -ETIMEDOUT timed out waiting for register ready or
-* command completion
-* >0 command indicated error, Status and Resp0-2 are
-* in hw structure.
-*
-* Side effects:
-*
-* Call context:
-* interrupt (DOASYNC)
-* process (DOWAIT or DOASYNC)
-----------------------------------------------------------------*/
+ * hfa384x_dowrid
+ *
+ * Constructs a write rid CTLX and issues it.
+ *
+ * NOTE: Any changes to the 'post-submit' code in this function
+ * need to be carried over to hfa384x_cbwrid() since the handling
+ * is virtually identical.
+ *
+ * Arguments:
+ * hw device structure
+ * enum cmd_mode DOWAIT or DOASYNC
+ * rid RID code
+ * riddata Data portion of RID formatted for MAC
+ * riddatalen Length of the data portion in bytes
+ * cmdcb command callback for async calls, NULL for DOWAIT calls
+ * usercb user callback for async calls, NULL for DOWAIT calls
+ * usercb_data user supplied data pointer for async calls
+ *
+ * Returns:
+ * 0 success
+ * -ETIMEDOUT timed out waiting for register ready or
+ * command completion
+ * >0 command indicated error, Status and Resp0-2 are
+ * in hw structure.
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt (DOASYNC)
+ * process (DOWAIT or DOASYNC)
+ *----------------------------------------------------------------
+ */
static int
hfa384x_dowrid(struct hfa384x *hw,
enum cmd_mode mode,
@@ -1513,38 +1534,39 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_dormem
-*
-* Constructs a readmem CTLX and issues it.
-*
-* NOTE: Any changes to the 'post-submit' code in this function
-* need to be carried over to hfa384x_cbrmem() since the handling
-* is virtually identical.
-*
-* Arguments:
-* hw device structure
-* mode DOWAIT or DOASYNC
-* page MAC address space page (CMD format)
-* offset MAC address space offset
-* data Ptr to data buffer to receive read
-* len Length of the data to read (max == 2048)
-* cmdcb command callback for async calls, NULL for DOWAIT calls
-* usercb user callback for async calls, NULL for DOWAIT calls
-* usercb_data user supplied data pointer for async calls
-*
-* Returns:
-* 0 success
-* -ETIMEDOUT timed out waiting for register ready or
-* command completion
-* >0 command indicated error, Status and Resp0-2 are
-* in hw structure.
-*
-* Side effects:
-*
-* Call context:
-* interrupt (DOASYNC)
-* process (DOWAIT or DOASYNC)
-----------------------------------------------------------------*/
+ * hfa384x_dormem
+ *
+ * Constructs a readmem CTLX and issues it.
+ *
+ * NOTE: Any changes to the 'post-submit' code in this function
+ * need to be carried over to hfa384x_cbrmem() since the handling
+ * is virtually identical.
+ *
+ * Arguments:
+ * hw device structure
+ * mode DOWAIT or DOASYNC
+ * page MAC address space page (CMD format)
+ * offset MAC address space offset
+ * data Ptr to data buffer to receive read
+ * len Length of the data to read (max == 2048)
+ * cmdcb command callback for async calls, NULL for DOWAIT calls
+ * usercb user callback for async calls, NULL for DOWAIT calls
+ * usercb_data user supplied data pointer for async calls
+ *
+ * Returns:
+ * 0 success
+ * -ETIMEDOUT timed out waiting for register ready or
+ * command completion
+ * >0 command indicated error, Status and Resp0-2 are
+ * in hw structure.
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt (DOASYNC)
+ * process (DOWAIT or DOASYNC)
+ *----------------------------------------------------------------
+ */
static int
hfa384x_dormem(struct hfa384x *hw,
enum cmd_mode mode,
@@ -1604,38 +1626,39 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_dowmem
-*
-* Constructs a writemem CTLX and issues it.
-*
-* NOTE: Any changes to the 'post-submit' code in this function
-* need to be carried over to hfa384x_cbwmem() since the handling
-* is virtually identical.
-*
-* Arguments:
-* hw device structure
-* mode DOWAIT or DOASYNC
-* page MAC address space page (CMD format)
-* offset MAC address space offset
-* data Ptr to data buffer containing write data
-* len Length of the data to read (max == 2048)
-* cmdcb command callback for async calls, NULL for DOWAIT calls
-* usercb user callback for async calls, NULL for DOWAIT calls
-* usercb_data user supplied data pointer for async calls.
-*
-* Returns:
-* 0 success
-* -ETIMEDOUT timed out waiting for register ready or
-* command completion
-* >0 command indicated error, Status and Resp0-2 are
-* in hw structure.
-*
-* Side effects:
-*
-* Call context:
-* interrupt (DOWAIT)
-* process (DOWAIT or DOASYNC)
-----------------------------------------------------------------*/
+ * hfa384x_dowmem
+ *
+ * Constructs a writemem CTLX and issues it.
+ *
+ * NOTE: Any changes to the 'post-submit' code in this function
+ * need to be carried over to hfa384x_cbwmem() since the handling
+ * is virtually identical.
+ *
+ * Arguments:
+ * hw device structure
+ * mode DOWAIT or DOASYNC
+ * page MAC address space page (CMD format)
+ * offset MAC address space offset
+ * data Ptr to data buffer containing write data
+ * len Length of the data to read (max == 2048)
+ * cmdcb command callback for async calls, NULL for DOWAIT calls
+ * usercb user callback for async calls, NULL for DOWAIT calls
+ * usercb_data user supplied data pointer for async calls.
+ *
+ * Returns:
+ * 0 success
+ * -ETIMEDOUT timed out waiting for register ready or
+ * command completion
+ * >0 command indicated error, Status and Resp0-2 are
+ * in hw structure.
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt (DOWAIT)
+ * process (DOWAIT or DOASYNC)
+ *----------------------------------------------------------------
+ */
static int
hfa384x_dowmem(struct hfa384x *hw,
enum cmd_mode mode,
@@ -1695,27 +1718,28 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_drvr_disable
-*
-* Issues the disable command to stop communications on one of
-* the MACs 'ports'. Only macport 0 is valid for stations.
-* APs may also disable macports 1-6. Only ports that have been
-* previously enabled may be disabled.
-*
-* Arguments:
-* hw device structure
-* macport MAC port number (host order)
-*
-* Returns:
-* 0 success
-* >0 f/w reported failure - f/w status code
-* <0 driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_disable
+ *
+ * Issues the disable command to stop communications on one of
+ * the MACs 'ports'. Only macport 0 is valid for stations.
+ * APs may also disable macports 1-6. Only ports that have been
+ * previously enabled may be disabled.
+ *
+ * Arguments:
+ * hw device structure
+ * macport MAC port number (host order)
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported failure - f/w status code
+ * <0 driver reported error (timeout|bad arg)
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_disable(struct hfa384x *hw, u16 macport)
{
int result = 0;
@@ -1733,27 +1757,28 @@ int hfa384x_drvr_disable(struct hfa384x *hw, u16 macport)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_enable
-*
-* Issues the enable command to enable communications on one of
-* the MACs 'ports'. Only macport 0 is valid for stations.
-* APs may also enable macports 1-6. Only ports that are currently
-* disabled may be enabled.
-*
-* Arguments:
-* hw device structure
-* macport MAC port number
-*
-* Returns:
-* 0 success
-* >0 f/w reported failure - f/w status code
-* <0 driver reported error (timeout|bad arg)
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_enable
+ *
+ * Issues the enable command to enable communications on one of
+ * the MACs 'ports'. Only macport 0 is valid for stations.
+ * APs may also enable macports 1-6. Only ports that are currently
+ * disabled may be enabled.
+ *
+ * Arguments:
+ * hw device structure
+ * macport MAC port number
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported failure - f/w status code
+ * <0 driver reported error (timeout|bad arg)
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_enable(struct hfa384x *hw, u16 macport)
{
int result = 0;
@@ -1771,26 +1796,27 @@ int hfa384x_drvr_enable(struct hfa384x *hw, u16 macport)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_flashdl_enable
-*
-* Begins the flash download state. Checks to see that we're not
-* already in a download state and that a port isn't enabled.
-* Sets the download state and retrieves the flash download
-* buffer location, buffer size, and timeout length.
-*
-* Arguments:
-* hw device structure
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_flashdl_enable
+ *
+ * Begins the flash download state. Checks to see that we're not
+ * already in a download state and that a port isn't enabled.
+ * Sets the download state and retrieves the flash download
+ * buffer location, buffer size, and timeout length.
+ *
+ * Arguments:
+ * hw device structure
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_flashdl_enable(struct hfa384x *hw)
{
int result = 0;
@@ -1832,24 +1858,25 @@ int hfa384x_drvr_flashdl_enable(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_flashdl_disable
-*
-* Ends the flash download state. Note that this will cause the MAC
-* firmware to restart.
-*
-* Arguments:
-* hw device structure
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_flashdl_disable
+ *
+ * Ends the flash download state. Note that this will cause the MAC
+ * firmware to restart.
+ *
+ * Arguments:
+ * hw device structure
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_flashdl_disable(struct hfa384x *hw)
{
/* Check that we're already in the download state */
@@ -1867,34 +1894,35 @@ int hfa384x_drvr_flashdl_disable(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_flashdl_write
-*
-* Performs a FLASH download of a chunk of data. First checks to see
-* that we're in the FLASH download state, then sets the download
-* mode, uses the aux functions to 1) copy the data to the flash
-* buffer, 2) sets the download 'write flash' mode, 3) readback and
-* compare. Lather rinse, repeat as many times an necessary to get
-* all the given data into flash.
-* When all data has been written using this function (possibly
-* repeatedly), call drvr_flashdl_disable() to end the download state
-* and restart the MAC.
-*
-* Arguments:
-* hw device structure
-* daddr Card address to write to. (host order)
-* buf Ptr to data to write.
-* len Length of data (host order).
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_flashdl_write
+ *
+ * Performs a FLASH download of a chunk of data. First checks to see
+ * that we're in the FLASH download state, then sets the download
+ * mode, uses the aux functions to 1) copy the data to the flash
+ * buffer, 2) sets the download 'write flash' mode, 3) readback and
+ * compare. Lather rinse, repeat as many times an necessary to get
+ * all the given data into flash.
+ * When all data has been written using this function (possibly
+ * repeatedly), call drvr_flashdl_disable() to end the download state
+ * and restart the MAC.
+ *
+ * Arguments:
+ * hw device structure
+ * daddr Card address to write to. (host order)
+ * buf Ptr to data to write.
+ * len Length of data (host order).
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_flashdl_write(struct hfa384x *hw, u32 daddr,
void *buf, u32 len)
{
@@ -2010,30 +2038,31 @@ int hfa384x_drvr_flashdl_write(struct hfa384x *hw, u32 daddr,
}
/*----------------------------------------------------------------
-* hfa384x_drvr_getconfig
-*
-* Performs the sequence necessary to read a config/info item.
-*
-* Arguments:
-* hw device structure
-* rid config/info record id (host order)
-* buf host side record buffer. Upon return it will
-* contain the body portion of the record (minus the
-* RID and len).
-* len buffer length (in bytes, should match record length)
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-* -ENODATA length mismatch between argument and retrieved
-* record.
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_getconfig
+ *
+ * Performs the sequence necessary to read a config/info item.
+ *
+ * Arguments:
+ * hw device structure
+ * rid config/info record id (host order)
+ * buf host side record buffer. Upon return it will
+ * contain the body portion of the record (minus the
+ * RID and len).
+ * len buffer length (in bytes, should match record length)
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ * -ENODATA length mismatch between argument and retrieved
+ * record.
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len)
{
return hfa384x_dorrid_wait(hw, rid, buf, len);
@@ -2061,7 +2090,8 @@ int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len)
*
* Call context:
* process
- ----------------------------------------------------------------*/
+ *----------------------------------------------------------------
+ */
int
hfa384x_drvr_setconfig_async(struct hfa384x *hw,
u16 rid,
@@ -2073,23 +2103,24 @@ int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_ramdl_disable
-*
-* Ends the ram download state.
-*
-* Arguments:
-* hw device structure
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_ramdl_disable
+ *
+ * Ends the ram download state.
+ *
+ * Arguments:
+ * hw device structure
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_ramdl_disable(struct hfa384x *hw)
{
/* Check that we're already in the download state */
@@ -2107,29 +2138,30 @@ int hfa384x_drvr_ramdl_disable(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_ramdl_enable
-*
-* Begins the ram download state. Checks to see that we're not
-* already in a download state and that a port isn't enabled.
-* Sets the download state and calls cmd_download with the
-* ENABLE_VOLATILE subcommand and the exeaddr argument.
-*
-* Arguments:
-* hw device structure
-* exeaddr the card execution address that will be
-* jumped to when ramdl_disable() is called
-* (host order).
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_ramdl_enable
+ *
+ * Begins the ram download state. Checks to see that we're not
+ * already in a download state and that a port isn't enabled.
+ * Sets the download state and calls cmd_download with the
+ * ENABLE_VOLATILE subcommand and the exeaddr argument.
+ *
+ * Arguments:
+ * hw device structure
+ * exeaddr the card execution address that will be
+ * jumped to when ramdl_disable() is called
+ * (host order).
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_ramdl_enable(struct hfa384x *hw, u32 exeaddr)
{
int result = 0;
@@ -2174,31 +2206,32 @@ int hfa384x_drvr_ramdl_enable(struct hfa384x *hw, u32 exeaddr)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_ramdl_write
-*
-* Performs a RAM download of a chunk of data. First checks to see
-* that we're in the RAM download state, then uses the [read|write]mem USB
-* commands to 1) copy the data, 2) readback and compare. The download
-* state is unaffected. When all data has been written using
-* this function, call drvr_ramdl_disable() to end the download state
-* and restart the MAC.
-*
-* Arguments:
-* hw device structure
-* daddr Card address to write to. (host order)
-* buf Ptr to data to write.
-* len Length of data (host order).
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_ramdl_write
+ *
+ * Performs a RAM download of a chunk of data. First checks to see
+ * that we're in the RAM download state, then uses the [read|write]mem USB
+ * commands to 1) copy the data, 2) readback and compare. The download
+ * state is unaffected. When all data has been written using
+ * this function, call drvr_ramdl_disable() to end the download state
+ * and restart the MAC.
+ *
+ * Arguments:
+ * hw device structure
+ * daddr Card address to write to. (host order)
+ * buf Ptr to data to write.
+ * len Length of data (host order).
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_ramdl_write(struct hfa384x *hw, u32 daddr, void *buf, u32 len)
{
int result = 0;
@@ -2249,36 +2282,37 @@ int hfa384x_drvr_ramdl_write(struct hfa384x *hw, u32 daddr, void *buf, u32 len)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_readpda
-*
-* Performs the sequence to read the PDA space. Note there is no
-* drvr_writepda() function. Writing a PDA is
-* generally implemented by a calling component via calls to
-* cmd_download and writing to the flash download buffer via the
-* aux regs.
-*
-* Arguments:
-* hw device structure
-* buf buffer to store PDA in
-* len buffer length
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-* -ETIMEDOUT timeout waiting for the cmd regs to become
-* available, or waiting for the control reg
-* to indicate the Aux port is enabled.
-* -ENODATA the buffer does NOT contain a valid PDA.
-* Either the card PDA is bad, or the auxdata
-* reads are giving us garbage.
-
-*
-* Side effects:
-*
-* Call context:
-* process or non-card interrupt.
-----------------------------------------------------------------*/
+ * hfa384x_drvr_readpda
+ *
+ * Performs the sequence to read the PDA space. Note there is no
+ * drvr_writepda() function. Writing a PDA is
+ * generally implemented by a calling component via calls to
+ * cmd_download and writing to the flash download buffer via the
+ * aux regs.
+ *
+ * Arguments:
+ * hw device structure
+ * buf buffer to store PDA in
+ * len buffer length
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ * -ETIMEDOUT timeout waiting for the cmd regs to become
+ * available, or waiting for the control reg
+ * to indicate the Aux port is enabled.
+ * -ENODATA the buffer does NOT contain a valid PDA.
+ * Either the card PDA is bad, or the auxdata
+ * reads are giving us garbage.
+ *
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process or non-card interrupt.
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_readpda(struct hfa384x *hw, void *buf, unsigned int len)
{
int result = 0;
@@ -2369,51 +2403,52 @@ int hfa384x_drvr_readpda(struct hfa384x *hw, void *buf, unsigned int len)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_setconfig
-*
-* Performs the sequence necessary to write a config/info item.
-*
-* Arguments:
-* hw device structure
-* rid config/info record id (in host order)
-* buf host side record buffer
-* len buffer length (in bytes)
-*
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_setconfig
+ *
+ * Performs the sequence necessary to write a config/info item.
+ *
+ * Arguments:
+ * hw device structure
+ * rid config/info record id (in host order)
+ * buf host side record buffer
+ * len buffer length (in bytes)
+ *
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_setconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len)
{
return hfa384x_dowrid_wait(hw, rid, buf, len);
}
/*----------------------------------------------------------------
-* hfa384x_drvr_start
-*
-* Issues the MAC initialize command, sets up some data structures,
-* and enables the interrupts. After this function completes, the
-* low-level stuff should be ready for any/all commands.
-*
-* Arguments:
-* hw device structure
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
-
+ * hfa384x_drvr_start
+ *
+ * Issues the MAC initialize command, sets up some data structures,
+ * and enables the interrupts. After this function completes, the
+ * low-level stuff should be ready for any/all commands.
+ *
+ * Arguments:
+ * hw device structure
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_start(struct hfa384x *hw)
{
int result, result1, result2;
@@ -2497,24 +2532,25 @@ int hfa384x_drvr_start(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_stop
-*
-* Shuts down the MAC to the point where it is safe to unload the
-* driver. Any subsystem that may be holding a data or function
-* ptr into the driver must be cleared/deinitialized.
-*
-* Arguments:
-* hw device structure
-* Returns:
-* 0 success
-* >0 f/w reported error - f/w status code
-* <0 driver reported error
-*
-* Side effects:
-*
-* Call context:
-* process
-----------------------------------------------------------------*/
+ * hfa384x_drvr_stop
+ *
+ * Shuts down the MAC to the point where it is safe to unload the
+ * driver. Any subsystem that may be holding a data or function
+ * ptr into the driver must be cleared/deinitialized.
+ *
+ * Arguments:
+ * hw device structure
+ * Returns:
+ * 0 success
+ * >0 f/w reported error - f/w status code
+ * <0 driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_stop(struct hfa384x *hw)
{
int i;
@@ -2545,26 +2581,27 @@ int hfa384x_drvr_stop(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_drvr_txframe
-*
-* Takes a frame from prism2sta and queues it for transmission.
-*
-* Arguments:
-* hw device structure
-* skb packet buffer struct. Contains an 802.11
-* data frame.
-* p80211_hdr points to the 802.11 header for the packet.
-* Returns:
-* 0 Success and more buffs available
-* 1 Success but no more buffs
-* 2 Allocation failure
-* 4 Buffer full or queue busy
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_drvr_txframe
+ *
+ * Takes a frame from prism2sta and queues it for transmission.
+ *
+ * Arguments:
+ * hw device structure
+ * skb packet buffer struct. Contains an 802.11
+ * data frame.
+ * p80211_hdr points to the 802.11 header for the packet.
+ * Returns:
+ * 0 Success and more buffs available
+ * 1 Success but no more buffs
+ * 2 Allocation failure
+ * 4 Buffer full or queue busy
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
int hfa384x_drvr_txframe(struct hfa384x *hw, struct sk_buff *skb,
union p80211_hdr *p80211_hdr,
struct p80211_metawep *p80211_wep)
@@ -2679,18 +2716,19 @@ void hfa384x_tx_timeout(struct wlandevice *wlandev)
}
/*----------------------------------------------------------------
-* hfa384x_usbctlx_reaper_task
-*
-* Tasklet to delete dead CTLX objects
-*
-* Arguments:
-* data ptr to a struct hfa384x
-*
-* Returns:
-*
-* Call context:
-* Interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbctlx_reaper_task
+ *
+ * Tasklet to delete dead CTLX objects
+ *
+ * Arguments:
+ * data ptr to a struct hfa384x
+ *
+ * Returns:
+ *
+ * Call context:
+ * Interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbctlx_reaper_task(unsigned long data)
{
struct hfa384x *hw = (struct hfa384x *)data;
@@ -2711,19 +2749,20 @@ static void hfa384x_usbctlx_reaper_task(unsigned long data)
}
/*----------------------------------------------------------------
-* hfa384x_usbctlx_completion_task
-*
-* Tasklet to call completion handlers for returned CTLXs
-*
-* Arguments:
-* data ptr to struct hfa384x
-*
-* Returns:
-* Nothing
-*
-* Call context:
-* Interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbctlx_completion_task
+ *
+ * Tasklet to call completion handlers for returned CTLXs
+ *
+ * Arguments:
+ * data ptr to struct hfa384x
+ *
+ * Returns:
+ * Nothing
+ *
+ * Call context:
+ * Interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbctlx_completion_task(unsigned long data)
{
struct hfa384x *hw = (struct hfa384x *)data;
@@ -2784,22 +2823,23 @@ static void hfa384x_usbctlx_completion_task(unsigned long data)
}
/*----------------------------------------------------------------
-* unlocked_usbctlx_cancel_async
-*
-* Mark the CTLX dead asynchronously, and ensure that the
-* next command on the queue is run afterwards.
-*
-* Arguments:
-* hw ptr to the struct hfa384x structure
-* ctlx ptr to a CTLX structure
-*
-* Returns:
-* 0 the CTLX's URB is inactive
-* -EINPROGRESS the URB is currently being unlinked
-*
-* Call context:
-* Either process or interrupt, but presumably interrupt
-----------------------------------------------------------------*/
+ * unlocked_usbctlx_cancel_async
+ *
+ * Mark the CTLX dead asynchronously, and ensure that the
+ * next command on the queue is run afterwards.
+ *
+ * Arguments:
+ * hw ptr to the struct hfa384x structure
+ * ctlx ptr to a CTLX structure
+ *
+ * Returns:
+ * 0 the CTLX's URB is inactive
+ * -EINPROGRESS the URB is currently being unlinked
+ *
+ * Call context:
+ * Either process or interrupt, but presumably interrupt
+ *----------------------------------------------------------------
+ */
static int unlocked_usbctlx_cancel_async(struct hfa384x *hw,
struct hfa384x_usbctlx *ctlx)
{
@@ -2829,27 +2869,28 @@ static int unlocked_usbctlx_cancel_async(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* unlocked_usbctlx_complete
-*
-* A CTLX has completed. It may have been successful, it may not
-* have been. At this point, the CTLX should be quiescent. The URBs
-* aren't active and the timers should have been stopped.
-*
-* The CTLX is migrated to the "completing" queue, and the completing
-* tasklet is scheduled.
-*
-* Arguments:
-* hw ptr to a struct hfa384x structure
-* ctlx ptr to a ctlx structure
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* Either, assume interrupt
-----------------------------------------------------------------*/
+ * unlocked_usbctlx_complete
+ *
+ * A CTLX has completed. It may have been successful, it may not
+ * have been. At this point, the CTLX should be quiescent. The URBs
+ * aren't active and the timers should have been stopped.
+ *
+ * The CTLX is migrated to the "completing" queue, and the completing
+ * tasklet is scheduled.
+ *
+ * Arguments:
+ * hw ptr to a struct hfa384x structure
+ * ctlx ptr to a ctlx structure
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * Either, assume interrupt
+ *----------------------------------------------------------------
+ */
static void unlocked_usbctlx_complete(struct hfa384x *hw,
struct hfa384x_usbctlx *ctlx)
{
@@ -2875,21 +2916,22 @@ static void unlocked_usbctlx_complete(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_usbctlxq_run
-*
-* Checks to see if the head item is running. If not, starts it.
-*
-* Arguments:
-* hw ptr to struct hfa384x
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* any
-----------------------------------------------------------------*/
+ * hfa384x_usbctlxq_run
+ *
+ * Checks to see if the head item is running. If not, starts it.
+ *
+ * Arguments:
+ * hw ptr to struct hfa384x
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * any
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbctlxq_run(struct hfa384x *hw)
{
unsigned long flags;
@@ -2975,21 +3017,22 @@ static void hfa384x_usbctlxq_run(struct hfa384x *hw)
}
/*----------------------------------------------------------------
-* hfa384x_usbin_callback
-*
-* Callback for URBs on the BULKIN endpoint.
-*
-* Arguments:
-* urb ptr to the completed urb
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbin_callback
+ *
+ * Callback for URBs on the BULKIN endpoint.
+ *
+ * Arguments:
+ * urb ptr to the completed urb
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbin_callback(struct urb *urb)
{
struct wlandevice *wlandev = urb->context;
@@ -3151,25 +3194,26 @@ static void hfa384x_usbin_callback(struct urb *urb)
}
/*----------------------------------------------------------------
-* hfa384x_usbin_ctlx
-*
-* We've received a URB containing a Prism2 "response" message.
-* This message needs to be matched up with a CTLX on the active
-* queue and our state updated accordingly.
-*
-* Arguments:
-* hw ptr to struct hfa384x
-* usbin ptr to USB IN packet
-* urb_status status of this Bulk-In URB
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbin_ctlx
+ *
+ * We've received a URB containing a Prism2 "response" message.
+ * This message needs to be matched up with a CTLX on the active
+ * queue and our state updated accordingly.
+ *
+ * Arguments:
+ * hw ptr to struct hfa384x
+ * usbin ptr to USB IN packet
+ * urb_status status of this Bulk-In URB
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbin_ctlx(struct hfa384x *hw, union hfa384x_usbin *usbin,
int urb_status)
{
@@ -3273,22 +3317,23 @@ static void hfa384x_usbin_ctlx(struct hfa384x *hw, union hfa384x_usbin *usbin,
}
/*----------------------------------------------------------------
-* hfa384x_usbin_txcompl
-*
-* At this point we have the results of a previous transmit.
-*
-* Arguments:
-* wlandev wlan device
-* usbin ptr to the usb transfer buffer
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbin_txcompl
+ *
+ * At this point we have the results of a previous transmit.
+ *
+ * Arguments:
+ * wlandev wlan device
+ * usbin ptr to the usb transfer buffer
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbin_txcompl(struct wlandevice *wlandev,
union hfa384x_usbin *usbin)
{
@@ -3304,22 +3349,23 @@ static void hfa384x_usbin_txcompl(struct wlandevice *wlandev,
}
/*----------------------------------------------------------------
-* hfa384x_usbin_rx
-*
-* At this point we have a successful received a rx frame packet.
-*
-* Arguments:
-* wlandev wlan device
-* usbin ptr to the usb transfer buffer
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbin_rx
+ *
+ * At this point we have a successful received a rx frame packet.
+ *
+ * Arguments:
+ * wlandev wlan device
+ * usbin ptr to the usb transfer buffer
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbin_rx(struct wlandevice *wlandev, struct sk_buff *skb)
{
union hfa384x_usbin *usbin = (union hfa384x_usbin *)skb->data;
@@ -3400,26 +3446,27 @@ static void hfa384x_usbin_rx(struct wlandevice *wlandev, struct sk_buff *skb)
}
/*----------------------------------------------------------------
-* hfa384x_int_rxmonitor
-*
-* Helper function for int_rx. Handles monitor frames.
-* Note that this function allocates space for the FCS and sets it
-* to 0xffffffff. The hfa384x doesn't give us the FCS value but the
-* higher layers expect it. 0xffffffff is used as a flag to indicate
-* the FCS is bogus.
-*
-* Arguments:
-* wlandev wlan device structure
-* rxfrm rx descriptor read from card in int_rx
-*
-* Returns:
-* nothing
-*
-* Side effects:
-* Allocates an skb and passes it up via the PF_PACKET interface.
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_int_rxmonitor
+ *
+ * Helper function for int_rx. Handles monitor frames.
+ * Note that this function allocates space for the FCS and sets it
+ * to 0xffffffff. The hfa384x doesn't give us the FCS value but the
+ * higher layers expect it. 0xffffffff is used as a flag to indicate
+ * the FCS is bogus.
+ *
+ * Arguments:
+ * wlandev wlan device structure
+ * rxfrm rx descriptor read from card in int_rx
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ * Allocates an skb and passes it up via the PF_PACKET interface.
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_int_rxmonitor(struct wlandevice *wlandev,
struct hfa384x_usb_rxfrm *rxfrm)
{
@@ -3478,7 +3525,8 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev,
}
/* Copy the 802.11 header to the skb
- (ctl frames may be less than a full header) */
+ * (ctl frames may be less than a full header)
+ */
datap = skb_put(skb, hdrlen);
memcpy(datap, &(rxdesc->frame_control), hdrlen);
@@ -3505,22 +3553,23 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev,
}
/*----------------------------------------------------------------
-* hfa384x_usbin_info
-*
-* At this point we have a successful received a Prism2 info frame.
-*
-* Arguments:
-* wlandev wlan device
-* usbin ptr to the usb transfer buffer
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbin_info
+ *
+ * At this point we have a successful received a Prism2 info frame.
+ *
+ * Arguments:
+ * wlandev wlan device
+ * usbin ptr to the usb transfer buffer
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbin_info(struct wlandevice *wlandev,
union hfa384x_usbin *usbin)
{
@@ -3530,21 +3579,22 @@ static void hfa384x_usbin_info(struct wlandevice *wlandev,
}
/*----------------------------------------------------------------
-* hfa384x_usbout_callback
-*
-* Callback for URBs on the BULKOUT endpoint.
-*
-* Arguments:
-* urb ptr to the completed urb
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbout_callback
+ *
+ * Callback for URBs on the BULKOUT endpoint.
+ *
+ * Arguments:
+ * urb ptr to the completed urb
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbout_callback(struct urb *urb)
{
struct wlandevice *wlandev = urb->context;
@@ -3605,21 +3655,22 @@ static void hfa384x_usbout_callback(struct urb *urb)
}
/*----------------------------------------------------------------
-* hfa384x_ctlxout_callback
-*
-* Callback for control data on the BULKOUT endpoint.
-*
-* Arguments:
-* urb ptr to the completed urb
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_ctlxout_callback
+ *
+ * Callback for control data on the BULKOUT endpoint.
+ *
+ * Arguments:
+ * urb ptr to the completed urb
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_ctlxout_callback(struct urb *urb)
{
struct hfa384x *hw = urb->context;
@@ -3734,23 +3785,24 @@ static void hfa384x_ctlxout_callback(struct urb *urb)
}
/*----------------------------------------------------------------
-* hfa384x_usbctlx_reqtimerfn
-*
-* Timer response function for CTLX request timeouts. If this
-* function is called, it means that the callback for the OUT
-* URB containing a Prism2.x XXX_Request was never called.
-*
-* Arguments:
-* data a ptr to the struct hfa384x
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbctlx_reqtimerfn
+ *
+ * Timer response function for CTLX request timeouts. If this
+ * function is called, it means that the callback for the OUT
+ * URB containing a Prism2.x XXX_Request was never called.
+ *
+ * Arguments:
+ * data a ptr to the struct hfa384x
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbctlx_reqtimerfn(unsigned long data)
{
struct hfa384x *hw = (struct hfa384x *)data;
@@ -3792,23 +3844,24 @@ static void hfa384x_usbctlx_reqtimerfn(unsigned long data)
}
/*----------------------------------------------------------------
-* hfa384x_usbctlx_resptimerfn
-*
-* Timer response function for CTLX response timeouts. If this
-* function is called, it means that the callback for the IN
-* URB containing a Prism2.x XXX_Response was never called.
-*
-* Arguments:
-* data a ptr to the struct hfa384x
-*
-* Returns:
-* nothing
-*
-* Side effects:
-*
-* Call context:
-* interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbctlx_resptimerfn
+ *
+ * Timer response function for CTLX response timeouts. If this
+ * function is called, it means that the callback for the IN
+ * URB containing a Prism2.x XXX_Response was never called.
+ *
+ * Arguments:
+ * data a ptr to the struct hfa384x
+ *
+ * Returns:
+ * nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usbctlx_resptimerfn(unsigned long data)
{
struct hfa384x *hw = (struct hfa384x *)data;
@@ -3834,20 +3887,21 @@ static void hfa384x_usbctlx_resptimerfn(unsigned long data)
}
/*----------------------------------------------------------------
-* hfa384x_usb_throttlefn
-*
-*
-* Arguments:
-* data ptr to hw
-*
-* Returns:
-* Nothing
-*
-* Side effects:
-*
-* Call context:
-* Interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usb_throttlefn
+ *
+ *
+ * Arguments:
+ * data ptr to hw
+ *
+ * Returns:
+ * Nothing
+ *
+ * Side effects:
+ *
+ * Call context:
+ * Interrupt
+ *----------------------------------------------------------------
+ */
static void hfa384x_usb_throttlefn(unsigned long data)
{
struct hfa384x *hw = (struct hfa384x *)data;
@@ -3873,23 +3927,24 @@ static void hfa384x_usb_throttlefn(unsigned long data)
}
/*----------------------------------------------------------------
-* hfa384x_usbctlx_submit
-*
-* Called from the doxxx functions to submit a CTLX to the queue
-*
-* Arguments:
-* hw ptr to the hw struct
-* ctlx ctlx structure to enqueue
-*
-* Returns:
-* -ENODEV if the adapter is unplugged
-* 0
-*
-* Side effects:
-*
-* Call context:
-* process or interrupt
-----------------------------------------------------------------*/
+ * hfa384x_usbctlx_submit
+ *
+ * Called from the doxxx functions to submit a CTLX to the queue
+ *
+ * Arguments:
+ * hw ptr to the hw struct
+ * ctlx ctlx structure to enqueue
+ *
+ * Returns:
+ * -ENODEV if the adapter is unplugged
+ * 0
+ *
+ * Side effects:
+ *
+ * Call context:
+ * process or interrupt
+ *----------------------------------------------------------------
+ */
static int hfa384x_usbctlx_submit(struct hfa384x *hw,
struct hfa384x_usbctlx *ctlx)
{
@@ -3911,21 +3966,22 @@ static int hfa384x_usbctlx_submit(struct hfa384x *hw,
}
/*----------------------------------------------------------------
-* hfa384x_isgood_pdrcore
-*
-* Quick check of PDR codes.
-*
-* Arguments:
-* pdrcode PDR code number (host order)
-*
-* Returns:
-* zero not good.
-* one is good.
-*
-* Side effects:
-*
-* Call context:
-----------------------------------------------------------------*/
+ * hfa384x_isgood_pdrcore
+ *
+ * Quick check of PDR codes.
+ *
+ * Arguments:
+ * pdrcode PDR code number (host order)
+ *
+ * Returns:
+ * zero not good.
+ * one is good.
+ *
+ * Side effects:
+ *
+ * Call context:
+ *----------------------------------------------------------------
+ */
static int hfa384x_isgood_pdrcode(u16 pdrcode)
{
switch (pdrcode) {
--
1.9.1
Powered by blists - more mailing lists