[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20161004102511.m3js4b7uafedqfx6@sirena.org.uk>
Date: Tue, 4 Oct 2016 12:25:11 +0200
From: Mark Brown <broonie@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [GIT PULL] spi updates for v4.9
The following changes since commit 08895a8b6b06ed2323cd97a36ee40a116b3db8ed:
Linux 4.8-rc8 (2016-09-25 18:47:13 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git tags/spi-v4.9
for you to fetch changes up to 2ce04684335f886fb5adb9ecbd2a85affca549d1:
Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', 'spi/topic/txx9' and 'spi/topic/xlp' into spi-next (2016-09-30 09:14:22 -0700)
----------------------------------------------------------------
spi: Updates for v4.9
The SPI subsystem has also had quite a quiet release, though with a
fairly large set of per-driver changes and several new drivers. The
bulk of the changes are:
- Lots and lots of cleanups and improvements for the fsl-espi driver.
- New drivers for Broadcom MSPI/iProc/STB, Cavium ThunderX and J-Core.
----------------------------------------------------------------
Andy Shevchenko (1):
spi: pxa2xx: Default thresholds to PXA configuration
Arnd Bergmann (2):
spi: bcm-qspi: don't include linux/mtd/cfi.h
spi: bcm-qspi: fix suspend/resume #ifdef
Axel Lin (1):
spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs
Baoyou Xie (1):
spi: loopback-test: mark rx_ranges_cmp() static
Baruch Siach (2):
MAINTAINERS: add tools/spi/ to the SPI entry
spi: spidev_test: fix build with musl libc
Chris Brandt (1):
spi: rspi: Increase accuracy of bit rate for RZ
Fabio Estevam (1):
spi: spi-fsl-dspi: Check clk_prepare_enable() error
Geert Uytterhoeven (4):
spi: spi-txx9: Add missing clock (un)prepare calls for CCF
spi: sh-msiof: Use ARCH_SHMOBILE instead of SUPERH
spi: spidev_test: Fix buffer overflow in unescape()
spi: core: Use spi_sync_transfer() in spi_write()/spi_read()
Heiner Kallweit (31):
spi: introduce max_message_size hook in spi_master
spi: fsl-espi: eliminate spi nor flash read loop
spi: fsl-espi: dont include irq.h
spi: fsl-espi: change return type of fsl_espi_setup_transfer to void
spi: fsl-espi: change return type of fsl_espi_cpu_bufs to void
spi: fsl-espi: add missing static declaration to fsl_espi_cpu_irq
spi: fsl-espi: remove unneeded variable in fsl_espi_do_trans
spi: fsl-espi: remove unused elements n_rx and n_tx in struct fsl_espi_transfer
spi: fsl-espi: simplify fsl_espi_setup_transfer
spi: fsl-espi: remove unneeded check in fsl_espi_do_trans
spi: fsl-espi: pre-allocate message buffer
spi: fsl-espi: factor out filling the local buffer
spi: fsl-espi: remove element status from struct fsl_espi_transfer
spi: fsl-espi: fix status handling in fsl_espi_do_one_msg
spi: fsl-espi: remove element actual_length from struct fsl_espi_trans
spi: fsl-espi: eliminate struct fsl_espi_transfer
spi: fsl-espi: merge fsl_espi_cmd_trans and fsl_espi_rw_trans
spi: fsl-espi: improve return value handling in fsl_espi_bufs
spi: fsl-espi: merge fsl_espi_bufs and fsl_espi_cpu_bufs
spi: fsl-espi: factor out initial message checking
spi: fsl-espi: centralize populating struct spi_transfer
spi: fsl-espi: factor out handling of read data
spi: fsl-espi: improve message length handling
spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans
spi: fsl-espi: simplify fsl_espi_setup_transfer
spi: fsl-espi: improve and simplify interrupt handler
spi: fsl-espi: align register access with other drivers
spi: fsl-espi: improve and extend register bit definitions
spi: fsl-espi: remove unused variable in fsl_espi_setup
spi: fsl-espi: simplify of_fsl_espi_probe
spi: fsl-espi: improve return value handling in fsl_espi_probe
Jan Glauber (1):
spi: octeon: Add ThunderX driver
Jarkko Nikula (3):
spi: pxa2xx: Do not needlessly initialize stack variables
spi: pxa2xx: Remove pointer to current SPI message from driver data
spi: pxa2xx: Remove pointer to chip data from driver data
Jorge Ramirez-Ortiz (1):
spi: tools: enable CROSS_COMPILE in Makefile
Kamal Dasu (5):
spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings
spi: bcm-qspi: Add Broadcom MSPI driver
spi: brcmstb-qspi: Broadcom settop platform driver
spi: bcm-qspi: Add BSPI spi-nor flash controller driver
spi: iproc-qspi: Add Broadcom iProc SoCs support
Kamlakant Patel (1):
spi: xlp: Add ACPI support for Vulcan SPI controller
LABBE Corentin (2):
spi: spi-fsl-dspi: constify devtype_data
spi: spi-fsl-dspi: fix a possible NULL dereference
Marek Vasut (1):
spi: imx: Gracefully handle NULL master->cs_gpios
Mark Brown (8):
Merge remote-tracking branch 'spi/fix/spidev' into spi-linus
Merge remote-tracking branch 'spi/topic/core' into spi-next
Merge remote-tracking branch 'spi/topic/dma' into spi-next
Merge remote-tracking branches 'spi/topic/bcm', 'spi/topic/dw' and 'spi/topic/fsl-dspi' into spi-next
Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/imx', 'spi/topic/jcore', 'spi/topic/loopback' and 'spi/topic/meson' into spi-next
Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', 'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next
Merge remote-tracking branches 'spi/topic/rspi', 'spi/topic/sc18is602', 'spi/topic/sh-msiof', 'spi/topic/spidev-test' and 'spi/topic/st-ssc4' into spi-next
Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', 'spi/topic/txx9' and 'spi/topic/xlp' into spi-next
Martin Kaiser (2):
spi: imx: set spi_bus_clk for mx1, mx31 and mx35
spi: imx: support loopback mode on imx35
Matthias Seidel (2):
spi: dw: fix multiple slaves with different baudrates
spi: dw: round up result of calculation for clock divider
Mika Westerberg (2):
spi: pxa2xx: Add support for GPIO descriptor chip selects
spi: pxa2xx: Fix build error because of missing header
Neil Armstrong (2):
spi: meson: Add GXBB Compatible string
spi: meson: Add GXBB compatible
Phil Reid (2):
spi: sc18is602: Add reset control via gpio pin.
spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep
Rich Felker (2):
spi: jcore: add J-Core SPI master bindings
spi: add driver for J-Core SPI controller
Sudeep Holla (1):
spi: qup: skip clk_disable_unprepare if the device is already runtime suspended
Vignesh R (2):
spi: Add support to handle kmap'd buffers in spi_map_buf()
spi: spi-ti-qspi: Add DMA support for QSPI mmap read
Wei Yongjun (7):
spi: pic32-sqi: use list_move_tail and list_move
spi: jcore: remove unnecessary platform_set_drvdata()
spi: spi-fsl-dspi: Drop extra spi_master_put in device remove function
spi: spi-cavium-thunderx: Add missing clk_disable_unprepare()
spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
spi: imx: fix error return code in spi_imx_probe()
.../devicetree/bindings/spi/brcm,spi-bcm-qspi.txt | 233 ++++
.../devicetree/bindings/spi/jcore,spi.txt | 34 +
.../devicetree/bindings/spi/spi-meson.txt | 2 +-
MAINTAINERS | 1 +
drivers/spi/Kconfig | 26 +-
drivers/spi/Makefile | 4 +
drivers/spi/spi-bcm-qspi.c | 1397 ++++++++++++++++++++
drivers/spi/spi-bcm-qspi.h | 115 ++
drivers/spi/spi-brcmstb-qspi.c | 53 +
drivers/spi/spi-cavium-thunderx.c | 120 ++
drivers/spi/spi-cavium.h | 3 +
drivers/spi/spi-dw.c | 15 +-
drivers/spi/spi-dw.h | 1 +
drivers/spi/spi-fsl-dspi.c | 16 +-
drivers/spi/spi-fsl-espi.c | 607 ++++-----
drivers/spi/spi-fsl-lib.h | 3 +-
drivers/spi/spi-imx.c | 35 +-
drivers/spi/spi-iproc-qspi.c | 163 +++
drivers/spi/spi-jcore.c | 231 ++++
drivers/spi/spi-loopback-test.c | 2 +-
drivers/spi/spi-meson-spifc.c | 1 +
drivers/spi/spi-pic32-sqi.c | 6 +-
drivers/spi/spi-pxa2xx-dma.c | 7 +-
drivers/spi/spi-pxa2xx.c | 172 ++-
drivers/spi/spi-pxa2xx.h | 5 +-
drivers/spi/spi-qup.c | 6 +-
drivers/spi/spi-rspi.c | 14 +-
drivers/spi/spi-sc18is602.c | 9 +
drivers/spi/spi-st-ssc4.c | 19 +-
drivers/spi/spi-ti-qspi.c | 139 +-
drivers/spi/spi-txx9.c | 6 +-
drivers/spi/spi-xlp.c | 13 +-
drivers/spi/spi.c | 17 +-
include/linux/pxa2xx_ssp.h | 20 +-
include/linux/spi/spi.h | 83 +-
tools/spi/Makefile | 2 +
tools/spi/spidev_test.c | 3 +-
37 files changed, 3046 insertions(+), 537 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/jcore,spi.txt
create mode 100644 drivers/spi/spi-bcm-qspi.c
create mode 100644 drivers/spi/spi-bcm-qspi.h
create mode 100644 drivers/spi/spi-brcmstb-qspi.c
create mode 100644 drivers/spi/spi-cavium-thunderx.c
create mode 100644 drivers/spi/spi-iproc-qspi.c
create mode 100644 drivers/spi/spi-jcore.c
Download attachment "signature.asc" of type "application/pgp-signature" (456 bytes)
Powered by blists - more mailing lists