| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 4 Oct 2016 18:56:13 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Code Kipper <codekipper@...il.com>
Cc: Mylène Josserand
<mylene.josserand@...e-electrons.com>,
Vinod Koul <vinod.koul@...el.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Lee Jones <lee.jones@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
devicetree <devicetree@...r.kernel.org>,
Linux-ALSA <alsa-devel@...a-project.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
dmaengine@...r.kernel.org, linux-clk <linux-clk@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 04/14] ASoC: Add sun8i analog codec driver
On Tue, Oct 4, 2016 at 6:21 PM, Code Kipper <codekipper@...il.com> wrote:
> On 4 October 2016 at 11:46, Mylène Josserand
> <mylene.josserand@...e-electrons.com> wrote:
>> Add the analog part of the sun8i (A33) codec driver. This driver
>> implements all the analog part of the codec using PRCM registers.
>>
>> The read/write regmap functions must be handled in a custom way as
>> the PRCM register behaves as "mailbox" register.
>>
>> Signed-off-by: Mylène Josserand <mylene.josserand@...e-electrons.com>
>> ---
>> sound/soc/sunxi/Kconfig | 7 +
>> sound/soc/sunxi/Makefile | 1 +
>> sound/soc/sunxi/sun8i-codec-analog.c | 304 +++++++++++++++++++++++++++++++++++
>> 3 files changed, 312 insertions(+)
>> create mode 100644 sound/soc/sunxi/sun8i-codec-analog.c
>>
>> diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig
>> index dd23682..7aee95a 100644
>> --- a/sound/soc/sunxi/Kconfig
>> +++ b/sound/soc/sunxi/Kconfig
>> @@ -26,4 +26,11 @@ config SND_SUN4I_SPDIF
>> help
>> Say Y or M to add support for the S/PDIF audio block in the Allwinner
>> A10 and affiliated SoCs.
>> +
>> +config SND_SUN8I_CODEC_ANALOG
>> + tristate "Allwinner SUN8I analog codec"
>> + select REGMAP_MMIO
>> + help
>> + Say Y or M if you want to add sun8i analog audiocodec support
>> +
>> endmenu
>> diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile
>> index 604c7b84..241c0df 100644
>> --- a/sound/soc/sunxi/Makefile
>> +++ b/sound/soc/sunxi/Makefile
>> @@ -1,3 +1,4 @@
>> obj-$(CONFIG_SND_SUN4I_CODEC) += sun4i-codec.o
>> obj-$(CONFIG_SND_SUN4I_I2S) += sun4i-i2s.o
>> obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o
>> +obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o
>> diff --git a/sound/soc/sunxi/sun8i-codec-analog.c b/sound/soc/sunxi/sun8i-codec-analog.c
>> new file mode 100644
>> index 0000000..be3d540
>> --- /dev/null
>> +++ b/sound/soc/sunxi/sun8i-codec-analog.c
>> @@ -0,0 +1,304 @@
>> +/*
>> + * This driver supports the analog controls for the internal codec
>> + * found in Allwinner's A31s, A33 and A23 SoCs.
>> + *
>> + * Copyright 2016 Chen-Yu Tsai <wens@...e.org>
>> + * Copyright 2016 Mylène Josserand <mylene.josserand@...e-electrons.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <sound/soc.h>
>> +#include <sound/soc-dapm.h>
>> +#include <sound/tlv.h>
>> +
>> +/* Codec analog control register offsets and bit fields */
>> +#define SUN8I_ADDA_HP_VOLC 0x00
>> +#define SUN8I_ADDA_HP_VOLC_PA_CLK_GATE 7
>> +#define SUN8I_ADDA_HP_VOLC_HP_VOL 0
>> +#define SUN8I_ADDA_LOMIXSC 0x01
>> +#define SUN8I_ADDA_LOMIXSC_MIC1 6
>> +#define SUN8I_ADDA_LOMIXSC_MIC2 5
>> +#define SUN8I_ADDA_LOMIXSC_PHONE 4
>> +#define SUN8I_ADDA_LOMIXSC_PHONEN 3
>> +#define SUN8I_ADDA_LOMIXSC_LINEINL 2
>> +#define SUN8I_ADDA_LOMIXSC_DACL 1
>> +#define SUN8I_ADDA_LOMIXSC_DACR 0
>> +#define SUN8I_ADDA_ROMIXSC 0x02
>> +#define SUN8I_ADDA_ROMIXSC_MIC1 6
>> +#define SUN8I_ADDA_ROMIXSC_MIC2 5
>> +#define SUN8I_ADDA_ROMIXSC_PHONE 4
>> +#define SUN8I_ADDA_ROMIXSC_PHONEP 3
>> +#define SUN8I_ADDA_ROMIXSC_LINEINR 2
>> +#define SUN8I_ADDA_ROMIXSC_DACR 1
>> +#define SUN8I_ADDA_ROMIXSC_DACL 0
>> +#define SUN8I_ADDA_DAC_PA_SRC 0x03
>> +#define SUN8I_ADDA_DAC_PA_SRC_DACAREN 7
>> +#define SUN8I_ADDA_DAC_PA_SRC_DACALEN 6
>> +#define SUN8I_ADDA_DAC_PA_SRC_RMIXEN 5
>> +#define SUN8I_ADDA_DAC_PA_SRC_LMIXEN 4
>> +#define SUN8I_ADDA_DAC_PA_SRC_RHPPAMUTE 3
>> +#define SUN8I_ADDA_DAC_PA_SRC_LHPPAMUTE 2
>> +#define SUN8I_ADDA_DAC_PA_SRC_RHPIS 1
>> +#define SUN8I_ADDA_DAC_PA_SRC_LHPIS 0
>> +#define SUN8I_ADDA_PHONEIN_GCTRL 0x04
>> +#define SUN8I_ADDA_PHONEIN_GCTRL_PHONEPG 4
>> +#define SUN8I_ADDA_PHONEIN_GCTRL_PHONENG 0
>> +#define SUN8I_ADDA_LINEIN_GCTRL 0x05
>> +#define SUN8I_ADDA_LINEIN_GCTRL_LINEING 4
>> +#define SUN8I_ADDA_LINEIN_GCTRL_PHONEG 0
>> +#define SUN8I_ADDA_MICIN_GCTRL 0x06
>> +#define SUN8I_ADDA_MICIN_GCTRL_MIC1G 4
>> +#define SUN8I_ADDA_MICIN_GCTRL_MIC2G 0
>> +#define SUN8I_ADDA_PAEN_HP_CTRL 0x07
>> +#define SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN 7
>> +#define SUN8I_ADDA_PAEN_HP_CTRL_HPCOM_FC 5
>> +#define SUN8I_ADDA_PAEN_HP_CTRL_COMPTEN 4
>> +#define SUN8I_ADDA_PAEN_HP_CTRL_PA_ANTI_POP_CTRL 2
>> +#define SUN8I_ADDA_PAEN_HP_CTRL_LTRNMUTE 1
>> +#define SUN8I_ADDA_PAEN_HP_CTRL_RTLNMUTE 0
>> +#define SUN8I_ADDA_PHONEOUT_CTRL 0x08
>> +#define SUN8I_ADDA_PHONEOUT_CTRL_PHONEOUTG 5
>> +#define SUN8I_ADDA_PHONEOUT_CTRL_PHONEOUTEN 4
>> +#define SUN8I_ADDA_PHONEOUT_CTRL_PHONEOUTS3 3
>> +#define SUN8I_ADDA_PHONEOUT_CTRL_PHONEOUTS2 2
>> +#define SUN8I_ADDA_PHONEOUT_CTRL_PHONEOUTS1 1
>> +#define SUN8I_ADDA_PHONEOUT_CTRL_PHONEOUTS0 0
>> +#define SUN8I_ADDA_PHONE_GAIN_CTRL 0x09
>> +#define SUN8I_ADDA_PHONE_GAIN_CTRL_PHONEPREG 0
>> +#define SUN8I_ADDA_MIC2G_CTRL 0x0a
>> +#define SUN8I_ADDA_MIC2G_CTRL_MIC2AMPEN 7
>> +#define SUN8I_ADDA_MIC2G_CTRL_MIC2BOOST 4
>> +#define SUN8I_ADDA_MIC1G_MICBIAS_CTRL 0x0b
>> +#define SUN8I_ADDA_MIC1G_MICBIAS_CTRL_HMICBIASEN 7
>> +#define SUN8I_ADDA_MIC1G_MICBIAS_CTRL_MMICBIASEN 6
>> +#define SUN8I_ADDA_MIC1G_MICBIAS_CTRL_HMICBIAS_MODE 5
>> +#define SUN8I_ADDA_MIC1G_MICBIAS_CTRL_MIC1AMPEN 3
>> +#define SUN8I_ADDA_MIC1G_MICBIAS_CTRL_MIC1BOOST 0
>> +#define SUN8I_ADDA_PA_ANTI_POP_CTRL 0x0e
>> +#define SUN8I_ADDA_ADC_AP_EN 0x0f
>> +
>> +/* Analog control register access bits */
>> +#define ADDA_PR 0x0 /* PRCM base + 0x1c0 */
>> +#define ADDA_PR_RESET BIT(28)
>> +#define ADDA_PR_WRITE BIT(24)
>> +#define ADDA_PR_ADDR_SHIFT 16
>> +#define ADDA_PR_ADDR_MASK GENMASK(4, 0)
>> +#define ADDA_PR_DATA_IN_SHIFT 8
>> +#define ADDA_PR_DATA_IN_MASK GENMASK(7, 0)
>> +#define ADDA_PR_DATA_OUT_SHIFT 0
>> +#define ADDA_PR_DATA_OUT_MASK GENMASK(7, 0)
>> +
>> +/* regmap access bits */
>> +static int adda_reg_read(void *context, unsigned int reg, unsigned int *val)
>> +{
>> + void __iomem *base = context;
>> + u32 tmp;
>> +
>> + tmp = readl(base);
>> +
>> + /* De-assert reset */
>> + writel(tmp | ADDA_PR_RESET, base);
>> +
>> + tmp &= ~(ADDA_PR_ADDR_MASK << ADDA_PR_ADDR_SHIFT);
>> + tmp |= reg << ADDA_PR_ADDR_SHIFT;
>> + writel(tmp, base);
>> +
>> + *val = readl(base) & ADDA_PR_DATA_OUT_MASK;
>> +
>> + return 0;
>> +}
>> +
>> +static int adda_reg_write(void *context, unsigned int reg, unsigned int val)
>> +{
>> + void __iomem *base = context;
>> + u32 tmp;
>> +
>> + tmp = readl(base);
>> + /* De-assert reset */
>> + writel(tmp | ADDA_PR_RESET, base);
>> +
>> + /* Write the address */
>> + tmp &= ~(ADDA_PR_ADDR_MASK << ADDA_PR_ADDR_SHIFT);
>> + tmp |= reg << ADDA_PR_ADDR_SHIFT;
>> + writel(tmp, base);
>> +
>> + /* Write the value */
>> + tmp &= ~(ADDA_PR_DATA_IN_MASK << ADDA_PR_DATA_IN_SHIFT);
>> + tmp |= val << ADDA_PR_DATA_IN_SHIFT;
>> + writel(tmp, base);
>> +
>> + /* Indicate that the previous value must be written */
>> + writel(readl(base) | ADDA_PR_WRITE, base);
>> +
>> + /* Reset the write bit */
>> + writel(readl(base) & ~(ADDA_PR_WRITE), base);
>> +
>> + return 0;
>> +}
>> +
>> +struct regmap_config adda_pr_regmap_cfg = {
>> + .name = "adda-pr",
>> + .reg_bits = 5,
>> + .reg_stride = 1,
>> + .val_bits = 8,
>> + .reg_read = adda_reg_read,
>> + .reg_write = adda_reg_write,
>> + .fast_io = true,
>> + .max_register = 24,
>> +};
>> +
>> +static DECLARE_TLV_DB_SCALE(sun8i_codec_headphone_volume_scale, -6300, 100, 1);
>> +
>> +static const struct snd_kcontrol_new sun8i_analog_widgets[] = {
>> + SOC_SINGLE_TLV("Headphone Volume", SUN8I_ADDA_HP_VOLC,
>> + SUN8I_ADDA_HP_VOLC_HP_VOL, 0x3F, 0,
>> + sun8i_codec_headphone_volume_scale),
>> +
>> + /* Playback Switch */
>> + SOC_DOUBLE("DAC Playback Switch", SUN8I_ADDA_DAC_PA_SRC,
>> + SUN8I_ADDA_DAC_PA_SRC_DACALEN, SUN8I_ADDA_DAC_PA_SRC_DACAREN,
>> + 1, 0),
>> +
>> + SOC_DOUBLE("Headphone Playback Switch", SUN8I_ADDA_DAC_PA_SRC,
>> + SUN8I_ADDA_DAC_PA_SRC_LHPPAMUTE,
>> + SUN8I_ADDA_DAC_PA_SRC_RHPPAMUTE, 1, 0),
>> +};
>> +
>> +/* headphone controls */
>> +static const char * const sun8i_codec_hp_src_enum_text[] = {
>> + "DAC", "Mixer",
>> +};
>> +
>> +static SOC_ENUM_DOUBLE_DECL(sun8i_codec_hp_src_enum,
>> + SUN8I_ADDA_DAC_PA_SRC,
>> + SUN8I_ADDA_DAC_PA_SRC_LHPIS,
>> + SUN8I_ADDA_DAC_PA_SRC_RHPIS,
>> + sun8i_codec_hp_src_enum_text);
>> +
>> +static const struct snd_kcontrol_new sun8i_codec_hp_src[] = {
>> + SOC_DAPM_ENUM("Headphone Source Playback Route",
>> + sun8i_codec_hp_src_enum),
>> +};
>> +
>> +static const struct snd_kcontrol_new sun8i_codec_mixer_controls[] = {
>> + SOC_DAPM_SINGLE("DAC Left Playback Switch",
>> + SUN8I_ADDA_LOMIXSC,
>> + SUN8I_ADDA_LOMIXSC_DACL, 1, 0),
>> + SOC_DAPM_SINGLE("DAC Right Playback Switch",
>> + SUN8I_ADDA_ROMIXSC,
>> + SUN8I_ADDA_ROMIXSC_DACR, 1, 0),
>> + SOC_DAPM_SINGLE("DAC Reversed Left Playback Switch",
>> + SUN8I_ADDA_LOMIXSC,
>> + SUN8I_ADDA_LOMIXSC_DACR, 1, 0),
>> + SOC_DAPM_SINGLE("DAC Reversed Right Playback Switch",
>> + SUN8I_ADDA_ROMIXSC,
>> + SUN8I_ADDA_ROMIXSC_DACL, 1, 0),
>> +};
>> +
>> +static const struct snd_soc_dapm_widget sun8i_codec_analog_dapm_widgets[] = {
>> + /* Mixers */
>> + SOC_MIXER_ARRAY("Left Mixer", SUN8I_ADDA_DAC_PA_SRC,
>> + SUN8I_ADDA_DAC_PA_SRC_LMIXEN, 0,
>> + sun8i_codec_mixer_controls),
>> + SOC_MIXER_ARRAY("Right Mixer", SUN8I_ADDA_DAC_PA_SRC,
>> + SUN8I_ADDA_DAC_PA_SRC_RMIXEN, 0,
>> + sun8i_codec_mixer_controls),
>> +
>> + /* Headphone output path */
>> + SND_SOC_DAPM_MUX("Headphone Source Playback Route",
>> + SND_SOC_NOPM, 0, 0, sun8i_codec_hp_src),
>> + SND_SOC_DAPM_OUT_DRV("Headphone Amp", SUN8I_ADDA_PAEN_HP_CTRL,
>> + SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN, 0, NULL, 0),
>> +
>> + /* Headphone outputs */
>> + SND_SOC_DAPM_OUTPUT("HP"),
>> +
>> +};
>> +
>> +static const struct snd_soc_dapm_route sun8i_codec_analog_dapm_routes[] = {
>> + /* Left Mixer Routes */
>> + { "Left Mixer", "DAC Playback Switch", "Left DAC" },
>> + { "Left Mixer", "DAC Reversed Left Playback Switch", "Right DAC" },
>> +
>> + /* Right Mixer Routes */
>> + { "Right Mixer", "DAC Playback Switch", "Right DAC" },
>> + { "Right Mixer", "DAC Reversed Right Playback Switch", "Left DAC" },
>> +
>> + /* Headphone Routes */
>> + { "Headphone Source Playback Route", "DAC", "Left DAC" },
>> + { "Headphone Source Playback Route", "DAC", "Right DAC" },
>> + { "Headphone Source Playback Route", "Mixer", "Left Mixer" },
>> + { "Headphone Source Playback Route", "Mixer", "Right Mixer" },
>> + { "Headphone Amp", NULL, "Headphone Source Playback Route" },
>> + { "HP", NULL, "Headphone Amp" },
>> +};
>> +
>> +static const struct snd_soc_component_driver sun8i_codec_analog_cmpnt_drv = {
>> + .name = "sun8i-codec-analog",
>> + .controls = sun8i_analog_widgets,
>> + .num_controls = ARRAY_SIZE(sun8i_analog_widgets),
>> + .dapm_widgets = sun8i_codec_analog_dapm_widgets,
>> + .num_dapm_widgets = ARRAY_SIZE(sun8i_codec_analog_dapm_widgets),
>> + .dapm_routes = sun8i_codec_analog_dapm_routes,
>> + .num_dapm_routes = ARRAY_SIZE(sun8i_codec_analog_dapm_routes),
>> +};
>> +
>> +static const struct of_device_id sun8i_codec_analog_of_match[] = {
>> + { .compatible = "allwinner,sun8i-codec-analog", },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, sun8i_codec_analog_of_match);
>> +
>> +static int sun8i_codec_analog_probe(struct platform_device *pdev)
>> +{
>> + struct resource *res;
>> + struct regmap *regmap;
>> + void __iomem *base;
>> +
>> + /* Get PRCM resources and registers */
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + base = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(base)) {
>> + dev_err(&pdev->dev, "Failed to map PRCM registers\n");
>> + return PTR_ERR(base);
>> + }
>> +
>> + regmap = devm_regmap_init(&pdev->dev, NULL, base, &adda_pr_regmap_cfg);
>> + if (IS_ERR(regmap)) {
>> + dev_err(&pdev->dev, "Regmap initialisation failed\n");
>> + return PTR_ERR(regmap);
>> + }
>> +
>> + return devm_snd_soc_register_component(&pdev->dev,
>> + &sun8i_codec_analog_cmpnt_drv,
>> + NULL, 0);
>> +}
>> +
>> +static struct platform_driver sun8i_codec_analog_driver = {
>> + .driver = {
>> + .name = "sun8i-codec-analog",
>> + .of_match_table = sun8i_codec_analog_of_match,
>> + },
>> + .probe = sun8i_codec_analog_probe,
>> +};
>> +module_platform_driver(sun8i_codec_analog_driver);
>> +
>> +MODULE_DESCRIPTION("Allwinner A31s/A33/A23 codec analog controls driver");
> Does the A31s have the prcm for the codec?, as I was under the
> impression that it was the same as the A31 and I can't seem to find a
> datasheet for that SoC. You could also add H3 and A64 here.
Yes it does, which is why I made this driver.
You can find the datasheet for the A31s in Allwinner's Github repo:
https://github.com/allwinner-zh/documents
ChenYu
> CK
>> +MODULE_AUTHOR("Chen-Yu Tsai <wens@...e.org>");
>> +MODULE_AUTHOR("Mylène Josserand <mylene.josserand@...e-electrons.com>");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:sun8i-codec-analog");
>> --
>> 2.9.3
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists