[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v67gT9j6-NYj04+et2PNHRGFUzhgCnVgX+eoPGybArL60A@mail.gmail.com>
Date: Wed, 5 Oct 2016 10:59:47 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Mylène Josserand
<mylene.josserand@...e-electrons.com>,
Vinod Koul <vinod.koul@...el.com>,
Chen-Yu Tsai <wens@...e.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Lee Jones <lee.jones@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
dmaengine@...r.kernel.org,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-clk <linux-clk@...r.kernel.org>,
Linux-ALSA <alsa-devel@...a-project.org>,
devicetree <devicetree@...r.kernel.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: Re: [PATCH 08/14] dt-bindings: sound: Add sun8i analog codec documentation
On Wed, Oct 5, 2016 at 12:24 AM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> Hi,
>
> On Tue, Oct 04, 2016 at 11:46:21AM +0200, Mylène Josserand wrote:
>> Add the documentation for dt-binding of the analog audiocodec
>> driver for SUN8I SoC.
>>
>> Signed-off-by: Mylène Josserand <mylene.josserand@...e-electrons.com>
>> ---
>> .../devicetree/bindings/sound/sun8i-codec-analog.txt | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
>> new file mode 100644
>> index 0000000..a03ec20
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
>> @@ -0,0 +1,20 @@
>> +* Allwinner A23/A33 Analog Codec
>> +
>> +This codec must be handled as a PRCM subnode.
>
> Like Mark was saying, you should probably reference the sun6i-prcm.txt
> binding here
>
>> +Required properties:
>> +- compatible: must be either "allwinner,sun8i-codec-analog"
>
> Our compatible prefix is <family>-<soc>, and using the older SoC that
> introduced that block.
>
> In this case, that would be sun6i-a31, I think?
sun6i-a31s actually, but a31s has extra line out controls,
so the right one would be sun8i-a23. Both are listed in my
original driver.
ChenYu
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
Powered by blists - more mailing lists