lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1475828757-926-6-git-send-email-clabbe.montjoie@gmail.com>
Date:   Fri,  7 Oct 2016 10:25:52 +0200
From:   Corentin Labbe <clabbe.montjoie@...il.com>
To:     robh+dt@...nel.org, mark.rutland@....com,
        maxime.ripard@...e-electrons.com, wens@...e.org,
        linux@...linux.org.uk, davem@...emloft.net, f.fainelli@...il.com,
        andrew@...n.ch
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Corentin Labbe <clabbe.montjoie@...il.com>
Subject: [PATCH v4 05/10] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver

The sun8i-emac is an ethernet MAC hardware that support 10/100/1000
speed.

This patch enable the sun8i-emac on the Allwinner H3 SoC Device-tree.
The SoC H3 have an internal PHY, so optionals syscon and ephy are set.

Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
---
 arch/arm/boot/dts/sun8i-h3.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 1101d2f..d218154 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -446,6 +446,30 @@
 			status = "disabled";
 		};
 
+		emac: ethernet@...0000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x104>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "ahb";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "ahb";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				int_mii_phy: ethernet-phy@1 {
+					reg = <1>;
+					clocks = <&ccu CLK_BUS_EPHY>;
+					resets = <&ccu RST_BUS_EPHY>;
+				};
+			};
+		};
+
 		gic: interrupt-controller@...81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
-- 
2.7.3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ