[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1475853518-22264-11-git-send-email-pantelis.antoniou@konsulko.com>
Date: Fri, 7 Oct 2016 18:18:38 +0300
From: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Frank Rowand <frowand.list@...il.com>,
Wolfram Sang <wsa@...-dreams.de>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Wim Van Sebroeck <wim@...ana.be>,
Peter Rosin <peda@...ntia.se>,
Debjit Ghosh <dghosh@...iper.net>,
Georgi Vlaev <gvlaev@...iper.net>,
Guenter Roeck <linux@...ck-us.net>,
Maryam Seraj <mseraj@...iper.net>,
Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-mtd@...ts.infradead.org, linux-watchdog@...r.kernel.org,
netdev@...r.kernel.org
Subject: [PATCH 10/10] net: mdio-sam: Add device tree documentation for SAM MDIO
From: Georgi Vlaev <gvlaev@...iper.net>
Add device tree bindings document for the SAM MDIO block
present in Juniper's SAM FPGA.
Signed-off-by: Georgi Vlaev <gvlaev@...iper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
---
Documentation/devicetree/bindings/net/mdio-sam.txt | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/mdio-sam.txt
diff --git a/Documentation/devicetree/bindings/net/mdio-sam.txt b/Documentation/devicetree/bindings/net/mdio-sam.txt
new file mode 100644
index 0000000..7d354e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-sam.txt
@@ -0,0 +1,48 @@
+Juniper SAM FPGA MFD MDIO bus properties.
+
+Required properties:
+- compatible : "jnx,mdio-sam"
+- reg : The start offset of the MDIO bus range
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The MDIO bus offset within the MDIO range.
+
+
+Example :
+
+ sam@10 {
+ compatible = "jnx,sam";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-sam@10 {
+ compatible = "jnx,mdio-sam";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40000>;
+
+ mdio0: mdio-sam@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ mdio1: mdio-sam@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4000>;
+ };
+
+ mdio2: mdio-sam@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8000>;
+ };
+ };
+ };
--
1.9.1
Powered by blists - more mailing lists