[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1475853724-22557-7-git-send-email-pantelis.antoniou@konsulko.com>
Date: Fri, 7 Oct 2016 18:22:03 +0300
From: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Frank Rowand <frowand.list@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Wim Van Sebroeck <wim@...ana.be>,
Jean Delvare <jdelvare@...e.com>,
Georgi Vlaev <gvlaev@...iper.net>,
Guenter Roeck <linux@...ck-us.net>,
JawaharBalaji Thirumalaisamy <jawaharb@...iper.net>,
Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mtd@...ts.infradead.org, linux-watchdog@...r.kernel.org,
linux-hwmon@...r.kernel.org
Subject: [PATCH 6/7] mtd: ptx1kbf: Bindings for Juniper's PTX1K Boot FPGA
From: Georgi Vlaev <gvlaev@...iper.net>
Add binding document for Junipers Flash IP block present
in the PTX1K Boot FPGA on PTX series of routers.
Signed-off-by: Georgi Vlaev <gvlaev@...iper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
---
.../devicetree/bindings/mtd/ptx1kbf-mtd.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/ptx1kbf-mtd.txt
diff --git a/Documentation/devicetree/bindings/mtd/ptx1kbf-mtd.txt b/Documentation/devicetree/bindings/mtd/ptx1kbf-mtd.txt
new file mode 100644
index 0000000..4e25060
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ptx1kbf-mtd.txt
@@ -0,0 +1,23 @@
+Flash device on a PTX1K Boot FPGA
+
+These flash chips are found in the PTX series of Juniper routers.
+
+Required properties:
+- compatible : must be "jnx,flash-sam"
+
+Optional properties:
+- reg : memory address for the flash chip, note that this is not
+required since usually the device is a subdevice of the SAM MFD
+driver which fills in the register fields.
+
+For the rest of the properties, see mtd-physmap.txt.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+ptx1kbf_mtd {
+ compatible = "jnx,ptx1kbf-mtd";
+ /* usually the whole flash is used */
+};
--
1.9.1
Powered by blists - more mailing lists