[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1475853669-22480-5-git-send-email-pantelis.antoniou@konsulko.com>
Date: Fri, 7 Oct 2016 18:21:03 +0300
From: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Frank Rowand <frowand.list@...il.com>,
Wolfram Sang <wsa@...-dreams.de>,
Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <j.anaszewski@...sung.com>,
Jean Delvare <jdelvare@...e.com>,
Peter Rosin <peda@...ntia.se>,
Avirup Banerjee <abanerjee@...iper.net>,
Georgi Vlaev <gvlaev@...iper.net>,
Guenter Roeck <linux@...ck-us.net>,
JawaharBalaji Thirumalaisamy <jawaharb@...iper.net>,
Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-leds@...r.kernel.org, linux-hwmon@...r.kernel.org
Subject: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings
From: Georgi Vlaev <gvlaev@...iper.net>
Add binding document for the i2c mux driver of Juniper's I2CS FPGA.
Signed-off-by: Georgi Vlaev <gvlaev@...iper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
---
.../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
new file mode 100644
index 0000000..03d917f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
@@ -0,0 +1,27 @@
+* Juniper I2C Mux on I2CS
+
+ I2C mux driver for switching the RE access to the FPC i2c bus.
+ Compatible with the FPC variant of the I2CS.
+
+Required properties:
+
+ - compatible: "jnx,i2cs-mux-i2cs".
+
+The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.txt in this directory.
+ - I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Example:
+
+fpc0_mux {
+ compatible = "jnx,i2c-mux-i2cs";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpc0i2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+};
--
1.9.1
Powered by blists - more mailing lists