linux-kernel - Re: [PATCH 0/6] Introduce Juniper CBC FPGA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 7 Oct 2016 18:44:37 +0300
From:   Pantelis Antoniou <pantelis.antoniou@...sulko.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Lee Jones <lee.jones@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Alexandre Courbot <gnurou@...il.com>,
        devel@...verdev.osuosl.org,
        devicetree <devicetree@...r.kernel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        "<linux-kernel@...r.kernel.org>" <linux-kernel@...r.kernel.org>,
        JawaharBalaji Thirumalaisamy <jawaharb@...iper.net>,
        linux-gpio@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Debjit Ghosh <dghosh@...iper.net>,
        Mohammad Kamil <mkamil@...iper.net>,
        Georgi Vlaev <gvlaev@...iper.net>,
        Frank Rowand <frowand.list@...il.com>,
        Guenter Roeck <linux@...ck-us.net>
Subject: Re: [PATCH 0/6] Introduce Juniper CBC FPGA


> On Oct 7, 2016, at 18:39 , Greg Kroah-Hartman <gregkh@...uxfoundation.org> wrote:
> 
> On Fri, Oct 07, 2016 at 06:20:08PM +0300, Pantelis Antoniou wrote:
>> Add Juniper's PTX1K CBC FPGA driver. Those FPGAs
>> are present in Juniper's PTX series of routers.
>> 
>> The MFD driver provices a gpio device and a special
>> driver for Juniper's board infrastucture.
>> The FPGA infrastucture driver is providing an interface
>> for user-space handling of the FPGA in those platforms.
>> 
>> There are full device tree binding documents for the
>> master mfd driver and for the slave driver.
>> 
>> This patchset is against mainline as of today: v4.8-9431-g3477d16
>> and is dependent on the "Juniper prerequisites" and
>> "Juniper infrastructure" patchsets sent earlier.
>> 
>> Georgi Vlaev (5):
>>  mfd: Add support for the PTX1K CBC FPGA
>>  gpio: Add support for PTX1K CBC FPGA spare GPIOs
>>  gpio: gpio-cbc: Document bindings of CBC FPGA GPIO block
>>  gpio: cbc-presence: Add CBC presence detect as GPIO driver
>>  gpio: gpio-cbc-presense: Document bindings of CBC FPGA presence
>> 
>> Tom Kavanagh (1):
>>  staging: jnx: CBD-FPGA infrastructure
>> 
>> .../bindings/gpio/jnx,gpio-cbc-presense.txt        |  31 +
>> .../devicetree/bindings/gpio/jnx,gpio-cbc.txt      |  30 +
>> drivers/gpio/Kconfig                               |  23 +
>> drivers/gpio/Makefile                              |   2 +
>> drivers/gpio/gpio-cbc-presence.c                   | 460 ++++++++++
>> drivers/gpio/gpio-cbc.c                            | 236 +++++
>> drivers/mfd/Kconfig                                |  16 +
>> drivers/mfd/Makefile                               |   1 +
>> drivers/mfd/cbc-core.c                             | 971 +++++++++++++++++++++
>> drivers/staging/jnx/Kconfig                        |  34 +
>> drivers/staging/jnx/Makefile                       |   5 +
>> drivers/staging/jnx/jnx-cbc-ptx1k.c                | 242 +++++
>> drivers/staging/jnx/jnx-cbd-fpga-common.c          | 332 +++++++
>> drivers/staging/jnx/jnx-cbd-fpga-common.h          |  27 +
>> drivers/staging/jnx/jnx-cbd-fpga-core.c            | 540 ++++++++++++
>> drivers/staging/jnx/jnx-cbd-fpga-core.h            |  68 ++
>> drivers/staging/jnx/jnx-cbd-fpga-platdata.h        |  51 ++
>> drivers/staging/jnx/jnx-cbd-fpga-ptx1k.c           | 134 +++
>> drivers/staging/jnx/jnx-cbd-fpga-ptx21k.c          | 143 +++
>> drivers/staging/jnx/jnx-cbd-fpga-ptx3k.c           | 111 +++
>> drivers/staging/jnx/jnx-cbd-fpga-ptx5k.c           | 107 +++
>> include/linux/mfd/cbc-core.h                       | 181 ++++
>> 22 files changed, 3745 insertions(+)
> 
> Please don't mix driver submissions like this.  Staging stuff needs to
> go to the staging maintainer, gpio to that one, mfd to that one, and so
> on.
> 
> there's almost nothing anyone can do with this series as-is, sorry.
> 
> please split it up.
> 

Well, it’s an MFD driver, there is dependence; will split up.
> thanks,
> 
> greg k-h