[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f04a83858232b0a3b39f270bc26ce43a8387ca94.1475860773.git.mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 14:24:11 -0300
From: Mauro Carvalho Chehab <mchehab@...pensource.com>
To: Linux Media Mailing List <linux-media@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@...pensource.com>,
Mauro Carvalho Chehab <mchehab@...radead.org>,
Andy Lutomirski <luto@...capital.net>,
Johannes Stezenbach <js@...uxtv.org>,
Jiri Kosina <jikos@...nel.org>,
Patrick Boettcher <patrick.boettcher@...teo.de>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Andy Lutomirski <luto@...nel.org>,
Michael Krufky <mkrufky@...uxtv.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Jörg Otte <jrg.otte@...il.com>
Subject: [PATCH 01/26] af9005: don't do DMA on stack
The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.
Signed-off-by: Mauro Carvalho Chehab <mchehab@...pensource.com>
---
drivers/media/usb/dvb-usb/af9005.c | 211 +++++++++++++++++++------------------
1 file changed, 111 insertions(+), 100 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index efa782ed6e2d..cc5815de1cfb 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -52,17 +52,15 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
struct af9005_device_state {
u8 sequence;
int led_state;
+ unsigned char data[256];
};
static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
int readwrite, int type, u8 * values, int len)
{
struct af9005_device_state *st = d->priv;
- u8 obuf[16] = { 0 };
- u8 ibuf[17] = { 0 };
- u8 command;
- int i;
- int ret;
+ u8 command, seq;
+ int i, ret;
if (len < 1) {
err("generic read/write, less than 1 byte. Makes no sense.");
@@ -73,16 +71,16 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
return -EINVAL;
}
- obuf[0] = 14; /* rest of buffer length low */
- obuf[1] = 0; /* rest of buffer length high */
+ st->data[0] = 14; /* rest of buffer length low */
+ st->data[1] = 0; /* rest of buffer length high */
- obuf[2] = AF9005_REGISTER_RW; /* register operation */
- obuf[3] = 12; /* rest of buffer length */
+ st->data[2] = AF9005_REGISTER_RW; /* register operation */
+ st->data[3] = 12; /* rest of buffer length */
- obuf[4] = st->sequence++; /* sequence number */
+ st->data[4] = seq = st->sequence++; /* sequence number */
- obuf[5] = (u8) (reg >> 8); /* register address */
- obuf[6] = (u8) (reg & 0xff);
+ st->data[5] = (u8) (reg >> 8); /* register address */
+ st->data[6] = (u8) (reg & 0xff);
if (type == AF9005_OFDM_REG) {
command = AF9005_CMD_OFDM_REG;
@@ -96,49 +94,43 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
command |= readwrite;
if (readwrite == AF9005_CMD_WRITE)
for (i = 0; i < len; i++)
- obuf[8 + i] = values[i];
+ st->data[8 + i] = values[i];
else if (type == AF9005_TUNER_REG)
/* read command for tuner, the first byte contains the i2c address */
- obuf[8] = values[0];
- obuf[7] = command;
+ st->data[8] = values[0];
+ st->data[7] = command;
- ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
+ ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0);
if (ret)
return ret;
/* sanity check */
- if (ibuf[2] != AF9005_REGISTER_RW_ACK) {
+ if (st->data[2] != AF9005_REGISTER_RW_ACK) {
err("generic read/write, wrong reply code.");
return -EIO;
}
- if (ibuf[3] != 0x0d) {
+ if (st->data[3] != 0x0d) {
err("generic read/write, wrong length in reply.");
return -EIO;
}
- if (ibuf[4] != obuf[4]) {
+ if (st->data[4] != seq) {
err("generic read/write, wrong sequence in reply.");
return -EIO;
}
/*
- Windows driver doesn't check these fields, in fact sometimes
- the register in the reply is different that what has been sent
-
- if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) {
- err("generic read/write, wrong register in reply.");
- return -EIO;
- }
- if (ibuf[7] != command) {
- err("generic read/write wrong command in reply.");
- return -EIO;
- }
+ * In thesis, both input and output buffers should have
+ * identical values for st->data[5] to st->data[8].
+ * However, windows driver doesn't check these fields, in fact
+ * sometimes the register in the reply is different that what
+ * has been sent
*/
- if (ibuf[16] != 0x01) {
+ if (st->data[16] != 0x01) {
err("generic read/write wrong status code in reply.");
return -EIO;
}
if (readwrite == AF9005_CMD_READ)
for (i = 0; i < len; i++)
- values[i] = ibuf[8 + i];
+ values[i] = st->data[8 + i];
return 0;
@@ -464,8 +456,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
struct af9005_device_state *st = d->priv;
int ret, i, packet_len;
- u8 buf[64];
- u8 ibuf[64];
+ u8 seq;
if (wlen < 0) {
err("send command, wlen less than 0 bytes. Makes no sense.");
@@ -480,37 +471,37 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
return -EINVAL;
}
packet_len = wlen + 5;
- buf[0] = (u8) (packet_len & 0xff);
- buf[1] = (u8) ((packet_len & 0xff00) >> 8);
+ st->data[0] = (u8) (packet_len & 0xff);
+ st->data[1] = (u8) ((packet_len & 0xff00) >> 8);
- buf[2] = 0x26; /* packet type */
- buf[3] = wlen + 3;
- buf[4] = st->sequence++;
- buf[5] = command;
- buf[6] = wlen;
+ st->data[2] = 0x26; /* packet type */
+ st->data[3] = wlen + 3;
+ st->data[4] = seq = st->sequence++;
+ st->data[5] = command;
+ st->data[6] = wlen;
for (i = 0; i < wlen; i++)
- buf[7 + i] = wbuf[i];
- ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
+ st->data[7 + i] = wbuf[i];
+ ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0);
if (ret)
return ret;
- if (ibuf[2] != 0x27) {
+ if (st->data[2] != 0x27) {
err("send command, wrong reply code.");
return -EIO;
}
- if (ibuf[4] != buf[4]) {
+ if (st->data[4] != seq) {
err("send command, wrong sequence in reply.");
return -EIO;
}
- if (ibuf[5] != 0x01) {
+ if (st->data[5] != 0x01) {
err("send command, wrong status code in reply.");
return -EIO;
}
- if (ibuf[6] != rlen) {
+ if (st->data[6] != rlen) {
err("send command, invalid data length in reply.");
return -EIO;
}
for (i = 0; i < rlen; i++)
- rbuf[i] = ibuf[i + 7];
+ rbuf[i] = st->data[i + 7];
return 0;
}
@@ -518,56 +509,56 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values,
int len)
{
struct af9005_device_state *st = d->priv;
- u8 obuf[16], ibuf[14];
+ u8 seq;
int ret, i;
- memset(obuf, 0, sizeof(obuf));
- memset(ibuf, 0, sizeof(ibuf));
+ memset(st->data, 0, sizeof(st->data));
- obuf[0] = 14; /* length of rest of packet low */
- obuf[1] = 0; /* length of rest of packer high */
+ st->data[0] = 14; /* length of rest of packet low */
+ st->data[1] = 0; /* length of rest of packer high */
- obuf[2] = 0x2a; /* read/write eeprom */
+ st->data[2] = 0x2a; /* read/write eeprom */
- obuf[3] = 12; /* size */
+ st->data[3] = 12; /* size */
- obuf[4] = st->sequence++;
+ st->data[4] = seq = st->sequence++;
- obuf[5] = 0; /* read */
+ st->data[5] = 0; /* read */
- obuf[6] = len;
- obuf[7] = address;
- ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
+ st->data[6] = len;
+ st->data[7] = address;
+ ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0);
if (ret)
return ret;
- if (ibuf[2] != 0x2b) {
+ if (st->data[2] != 0x2b) {
err("Read eeprom, invalid reply code");
return -EIO;
}
- if (ibuf[3] != 10) {
+ if (st->data[3] != 10) {
err("Read eeprom, invalid reply length");
return -EIO;
}
- if (ibuf[4] != obuf[4]) {
+ if (st->data[4] != seq) {
err("Read eeprom, wrong sequence in reply ");
return -EIO;
}
- if (ibuf[5] != 1) {
+ if (st->data[5] != 1) {
err("Read eeprom, wrong status in reply ");
return -EIO;
}
for (i = 0; i < len; i++) {
- values[i] = ibuf[6 + i];
+ values[i] = st->data[6 + i];
}
return 0;
}
-static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply)
+static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply,
+ u8 *buf, int size)
{
- u8 buf[FW_BULKOUT_SIZE + 2];
u16 checksum;
int act_len, i, ret;
- memset(buf, 0, sizeof(buf));
+
+ memset(buf, 0, size);
buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff);
switch (type) {
@@ -720,15 +711,21 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa
{
int i, packets, ret, act_len;
- u8 buf[FW_BULKOUT_SIZE + 2];
+ u8 *buf;
u8 reply;
- ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+ buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+ FW_BULKOUT_SIZE + 2);
if (ret)
- return ret;
+ goto err;
if (reply != 0x01) {
err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply);
- return -EIO;
+ ret = -EIO;
+ goto err;
}
packets = fw->size / FW_BULKOUT_SIZE;
buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
@@ -743,28 +740,35 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa
buf, FW_BULKOUT_SIZE + 2, &act_len, 1000);
if (ret) {
err("firmware download failed at packet %d with code %d", i, ret);
- return ret;
+ goto err;
}
}
- ret = af9005_boot_packet(udev, FW_CONFIRM, &reply);
+ ret = af9005_boot_packet(udev, FW_CONFIRM, &reply,
+ buf, FW_BULKOUT_SIZE + 2);
if (ret)
- return ret;
+ goto err;
if (reply != (u8) (packets & 0xff)) {
err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply);
- return -EIO;
+ ret = -EIO;
+ goto err;
}
- ret = af9005_boot_packet(udev, FW_BOOT, &reply);
+ ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf,
+ FW_BULKOUT_SIZE + 2);
if (ret)
- return ret;
- ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+ goto err;
+ ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+ FW_BULKOUT_SIZE + 2);
if (ret)
- return ret;
+ goto err;
if (reply != 0x02) {
err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply);
- return -EIO;
+ ret = -EIO;
+ goto err;
}
- return 0;
+err:
+ kfree(buf);
+ return ret;
}
@@ -823,9 +827,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
{
struct af9005_device_state *st = d->priv;
int ret, len;
-
- u8 obuf[5];
- u8 ibuf[256];
+ u8 seq;
*state = REMOTE_NO_KEY_PRESSED;
if (rc_decode == NULL) {
@@ -833,33 +835,33 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
return 0;
}
/* deb_info("rc_query\n"); */
- obuf[0] = 3; /* rest of packet length low */
- obuf[1] = 0; /* rest of packet lentgh high */
- obuf[2] = 0x40; /* read remote */
- obuf[3] = 1; /* rest of packet length */
- obuf[4] = st->sequence++; /* sequence number */
- ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
+ st->data[0] = 3; /* rest of packet length low */
+ st->data[1] = 0; /* rest of packet lentgh high */
+ st->data[2] = 0x40; /* read remote */
+ st->data[3] = 1; /* rest of packet length */
+ st->data[4] = seq = st->sequence++; /* sequence number */
+ ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0);
if (ret) {
err("rc query failed");
return ret;
}
- if (ibuf[2] != 0x41) {
+ if (st->data[2] != 0x41) {
err("rc query bad header.");
return -EIO;
}
- if (ibuf[4] != obuf[4]) {
+ if (st->data[4] != seq) {
err("rc query bad sequence.");
return -EIO;
}
- len = ibuf[5];
+ len = st->data[5];
if (len > 246) {
err("rc query invalid length");
return -EIO;
}
if (len > 0) {
deb_rc("rc data (%d) ", len);
- debug_dump((ibuf + 6), len, deb_rc);
- ret = rc_decode(d, &ibuf[6], len, event, state);
+ debug_dump((st->data + 6), len, deb_rc);
+ ret = rc_decode(d, &st->data[6], len, event, state);
if (ret) {
err("rc_decode failed");
return ret;
@@ -953,10 +955,16 @@ static int af9005_identify_state(struct usb_device *udev,
int *cold)
{
int ret;
- u8 reply;
- ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+ u8 reply, *buf;
+
+ buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = af9005_boot_packet(udev, FW_CONFIG, &reply,
+ buf, FW_BULKOUT_SIZE + 2);
if (ret)
- return ret;
+ goto err;
deb_info("result of FW_CONFIG in identify state %d\n", reply);
if (reply == 0x01)
*cold = 1;
@@ -965,7 +973,10 @@ static int af9005_identify_state(struct usb_device *udev,
else
return -EIO;
deb_info("Identify state cold = %d\n", *cold);
- return 0;
+
+err:
+ kfree(buf);
+ return ret;
}
static struct dvb_usb_device_properties af9005_properties;
--
2.7.4
Powered by blists - more mailing lists