[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 10 Oct 2016 16:35:39 -0500
From: Rob Herring <robh@...nel.org>
To: ahaslam@...libre.com
Cc: gregkh@...uxfoundation.org, nsekhar@...com,
stern@...land.harvard.edu, khilman@...libre.com,
sshtylyov@...mvista.com, david@...hnology.com,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH/RFT 09/12] usb: host: ohci-da8xx: Add devicetree bindings
documentation
On Fri, Oct 07, 2016 at 06:42:54PM +0200, ahaslam@...libre.com wrote:
> From: Axel Haslam <ahaslam@...libre.com>
>
> This patch documents the device tree bindings required for
> the ohci controller found in TI da8xx family of SoC's
>
> Signed-off-by: Axel Haslam <ahaslam@...libre.com>
> ---
> .../devicetree/bindings/usb/ohci-da8xx.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
> new file mode 100644
> index 0000000..e954ce5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
> @@ -0,0 +1,32 @@
> +DA8XX USB OHCI controller
> +
> +Required properties:
> +
> + - compatible: Should be "ti,da830-ohci"
> + - reg: Should contain one register range i.e. start and length
> + - interrupts: Description of the interrupt line
> + - phys: Phandle for the PHY device
> + - phy-names: Should be "usb-phy"
> +
> +Optional properties:
> + - vbus-gpio: If present, specifies a gpio that needs to be
vbus-gpios
> + activated for the bus to be powered.
> + - oci-gpio: If present, specifies a gpio that needs to be
oci-gpios
> + activated for the overcurrent detection.
> + - power_on_delay: Power On to Power Good time - in ms.
power-on-delay-ms
> +
> +Example for omap138-lck:
> +
> +usb_phy: usb-phy {
> + compatible = "ti,da830-usb-phy";
> + #phy-cells = <1>;
> + status = "disabled";
> +};
> +usb11: usb11@...5000 {
> + compatible = "ti,da830-ohci";
> + reg = <0x225000 0x1000>;
> + interrupts = <59>;
> + phys = <&usb_phy 1>;
> + phy-names = "usb-phy";
> + status = "disabled";
> +};
> --
> 2.7.1
>
Powered by blists - more mailing lists