linux-kernel - Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1 mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b81e619b-de55-1994-af5d-fe0eb116d9f9@rock-chips.com>
Date:   Wed, 12 Oct 2016 12:14:20 +0800
From:   Shawn Lin <shawn.lin@...k-chips.com>
To:     Kishon Vijay Abraham I <kishon@...com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     shawn.lin@...k-chips.com, linux-omap@...r.kernel.org,
        linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, nsekhar@...com
Subject: Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1
 mode

On 2016/10/11 20:58, Kishon Vijay Abraham I wrote:
> PCIe in AM57x/DRA7x devices is by default
> configured to work in GEN2 mode.  However there
> may be situations when working in GEN1 mode is
> desired. One example is limitation i925 (PCIe GEN2
> mode not supported at junction temperatures < 0C).
>

Just a drive-by comment.

Seems there are already much more requirments for host
drivers to know the limitation of link speed, so
I pushed patches recently to consolidate it for host
drivers[0] suggested by Rob. So maybe you could use that
instead. :)

[0]
https://patchwork.kernel.org/patch/9371931/
https://patchwork.kernel.org/patch/9371929/
> Add support to force Root Complex to work in GEN1
> mode if so desired, but don't force GEN1 mode on
> any board just yet.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> Signed-off-by: Sekhar Nori <nsekhar@...com>
> ---
>  Documentation/devicetree/bindings/pci/ti-pci.txt |    1 +
>  drivers/pci/host/pci-dra7xx.c                    |   27 ++++++++++++++++++++++
>  2 files changed, 28 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
> index 60e2516..a3d6ca3 100644
> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
> @@ -25,6 +25,7 @@ PCIe Designware Controller
>
>  Optional Property:
>   - gpios : Should be added if a gpio line is required to drive PERST# line
> + - ti,pcie-is-gen1 : Force the PCIe controller to work in GEN1 (2.5 GT/s).
>
>  Example:
>  axi {
> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
> index 4ccba6d..2a669cb 100644
> --- a/drivers/pci/host/pci-dra7xx.c
> +++ b/drivers/pci/host/pci-dra7xx.c
> @@ -63,11 +63,14 @@
>  #define	LINK_UP						BIT(16)
>  #define	DRA7XX_CPU_TO_BUS_ADDR				0x0FFFFFFF
>
> +#define EXP_CAP_ID_OFFSET				0x70
> +
>  struct dra7xx_pcie {
>  	struct pcie_port	pp;
>  	void __iomem		*base;		/* DT ti_conf */
>  	int			phy_count;	/* DT phy-names count */
>  	struct phy		**phy;
> +	bool			is_gen1;
>  };
>
>  #define to_dra7xx_pcie(x)	container_of((x), struct dra7xx_pcie, pp)
> @@ -96,12 +99,33 @@ static int dra7xx_pcie_establish_link(struct dra7xx_pcie *dra7xx_pcie)
>  	struct pcie_port *pp = &dra7xx_pcie->pp;
>  	struct device *dev = pp->dev;
>  	u32 reg;
> +	u32 exp_cap_off = EXP_CAP_ID_OFFSET;
>
>  	if (dw_pcie_link_up(pp)) {
>  		dev_err(dev, "link is already up\n");
>  		return 0;
>  	}
>
> +	if (dra7xx_pcie->is_gen1) {
> +		dw_pcie_cfg_read(pp->dbi_base + exp_cap_off + PCI_EXP_LNKCAP,
> +				 4, &reg);
> +		if ((reg & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
> +			reg &= ~((u32)PCI_EXP_LNKCAP_SLS);
> +			reg |= PCI_EXP_LNKCAP_SLS_2_5GB;
> +			dw_pcie_cfg_write(pp->dbi_base + exp_cap_off +
> +					  PCI_EXP_LNKCAP, 4, reg);
> +		}
> +
> +		dw_pcie_cfg_read(pp->dbi_base + exp_cap_off + PCI_EXP_LNKCTL2,
> +				 2, &reg);
> +		if ((reg & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
> +			reg &= ~((u32)PCI_EXP_LNKCAP_SLS);
> +			reg |= PCI_EXP_LNKCAP_SLS_2_5GB;
> +			dw_pcie_cfg_write(pp->dbi_base + exp_cap_off +
> +					  PCI_EXP_LNKCTL2, 2, reg);
> +		}
> +	}
> +
>  	reg = dra7xx_pcie_readl(dra7xx_pcie, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
>  	reg |= LTSSM_EN;
>  	dra7xx_pcie_writel(dra7xx_pcie, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
> @@ -402,6 +426,9 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  	reg &= ~LTSSM_EN;
>  	dra7xx_pcie_writel(dra7xx_pcie, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
>
> +	if (of_property_read_bool(np, "ti,pcie-is-gen1"))
> +		dra7xx_pcie->is_gen1 = true;
> +
>  	ret = dra7xx_add_pcie_port(dra7xx_pcie, pdev);
>  	if (ret < 0)
>  		goto err_gpio;
>


-- 
Best Regards
Shawn Lin